diff mbox

[1/3] iio: adc: meson-saradc: squash and share the common adc platform data

Message ID 20180326084629.100070-2-yixun.lan@amlogic.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Yixun Lan March 26, 2018, 8:46 a.m. UTC
Extract and promote common adc platform data into a new structure,
to make it better share the info between several SoCs,
this will avoid duplicating the code all over the place,
Save a few memory and make the code more maintainable.

Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 drivers/iio/adc/meson_saradc.c | 75 +++++++++++++++++++++++-------------------
 1 file changed, 42 insertions(+), 33 deletions(-)

Comments

Jonathan Cameron March 30, 2018, 9:48 a.m. UTC | #1
On Mon, 26 Mar 2018 16:46:27 +0800
Yixun Lan <yixun.lan@amlogic.com> wrote:

> Extract and promote common adc platform data into a new structure,
> to make it better share the info between several SoCs,
> this will avoid duplicating the code all over the place,
> Save a few memory and make the code more maintainable.
> 
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.

Thanks,

Jonathan

> ---
>  drivers/iio/adc/meson_saradc.c | 75 +++++++++++++++++++++++-------------------
>  1 file changed, 42 insertions(+), 33 deletions(-)
> 
> diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
> index 29fa7736d80c..799ed929ab99 100644
> --- a/drivers/iio/adc/meson_saradc.c
> +++ b/drivers/iio/adc/meson_saradc.c
> @@ -219,15 +219,19 @@ enum meson_sar_adc_chan7_mux_sel {
>  	CHAN7_MUX_CH7_INPUT = 0x7,
>  };
>  
> -struct meson_sar_adc_data {
> +struct meson_sar_adc_param {
>  	bool					has_bl30_integration;
>  	unsigned long				clock_rate;
>  	u32					bandgap_reg;
>  	unsigned int				resolution;
> -	const char				*name;
>  	const struct regmap_config		*regmap_config;
>  };
>  
> +struct meson_sar_adc_data {
> +	const struct meson_sar_adc_param	*param;
> +	const char				*name;
> +};
> +
>  struct meson_sar_adc_priv {
>  	struct regmap				*regmap;
>  	struct regulator			*vref;
> @@ -276,7 +280,7 @@ static int meson_sar_adc_calib_val(struct iio_dev *indio_dev, int val)
>  	/* use val_calib = scale * val_raw + offset calibration function */
>  	tmp = div_s64((s64)val * priv->calibscale, MILLION) + priv->calibbias;
>  
> -	return clamp(tmp, 0, (1 << priv->data->resolution) - 1);
> +	return clamp(tmp, 0, (1 << priv->data->param->resolution) - 1);
>  }
>  
>  static int meson_sar_adc_wait_busy_clear(struct iio_dev *indio_dev)
> @@ -328,7 +332,7 @@ static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev,
>  	}
>  
>  	fifo_val = FIELD_GET(MESON_SAR_ADC_FIFO_RD_SAMPLE_VALUE_MASK, regval);
> -	fifo_val &= GENMASK(priv->data->resolution - 1, 0);
> +	fifo_val &= GENMASK(priv->data->param->resolution - 1, 0);
>  	*val = meson_sar_adc_calib_val(indio_dev, fifo_val);
>  
>  	return 0;
> @@ -447,7 +451,7 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev)
>  
>  	mutex_lock(&indio_dev->mlock);
>  
> -	if (priv->data->has_bl30_integration) {
> +	if (priv->data->param->has_bl30_integration) {
>  		/* prevent BL30 from using the SAR ADC while we are using it */
>  		regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY,
>  				MESON_SAR_ADC_DELAY_KERNEL_BUSY,
> @@ -473,7 +477,7 @@ static void meson_sar_adc_unlock(struct iio_dev *indio_dev)
>  {
>  	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
>  
> -	if (priv->data->has_bl30_integration)
> +	if (priv->data->param->has_bl30_integration)
>  		/* allow BL30 to use the SAR ADC again */
>  		regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY,
>  				MESON_SAR_ADC_DELAY_KERNEL_BUSY, 0);
> @@ -557,7 +561,7 @@ static int meson_sar_adc_iio_info_read_raw(struct iio_dev *indio_dev,
>  		}
>  
>  		*val = ret / 1000;
> -		*val2 = priv->data->resolution;
> +		*val2 = priv->data->param->resolution;
>  		return IIO_VAL_FRACTIONAL_LOG2;
>  
>  	case IIO_CHAN_INFO_CALIBBIAS:
> @@ -630,7 +634,7 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
>  	 */
>  	meson_sar_adc_set_chan7_mux(indio_dev, CHAN7_MUX_CH7_INPUT);
>  
> -	if (priv->data->has_bl30_integration) {
> +	if (priv->data->param->has_bl30_integration) {
>  		/*
>  		 * leave sampling delay and the input clocks as configured by
>  		 * BL30 to make sure BL30 gets the values it expects when
> @@ -710,7 +714,7 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
>  		return ret;
>  	}
>  
> -	ret = clk_set_rate(priv->adc_clk, priv->data->clock_rate);
> +	ret = clk_set_rate(priv->adc_clk, priv->data->param->clock_rate);
>  	if (ret) {
>  		dev_err(indio_dev->dev.parent,
>  			"failed to set adc clock rate\n");
> @@ -723,14 +727,15 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
>  static void meson_sar_adc_set_bandgap(struct iio_dev *indio_dev, bool on_off)
>  {
>  	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
> +	const struct meson_sar_adc_param *param = priv->data->param;
>  	u32 enable_mask;
>  
> -	if (priv->data->bandgap_reg == MESON_SAR_ADC_REG11)
> +	if (param->bandgap_reg == MESON_SAR_ADC_REG11)
>  		enable_mask = MESON_SAR_ADC_REG11_BANDGAP_EN;
>  	else
>  		enable_mask = MESON_SAR_ADC_DELTA_10_TS_VBG_EN;
>  
> -	regmap_update_bits(priv->regmap, priv->data->bandgap_reg, enable_mask,
> +	regmap_update_bits(priv->regmap, param->bandgap_reg, enable_mask,
>  			   on_off ? enable_mask : 0);
>  }
>  
> @@ -842,8 +847,8 @@ static int meson_sar_adc_calib(struct iio_dev *indio_dev)
>  	int ret, nominal0, nominal1, value0, value1;
>  
>  	/* use points 25% and 75% for calibration */
> -	nominal0 = (1 << priv->data->resolution) / 4;
> -	nominal1 = (1 << priv->data->resolution) * 3 / 4;
> +	nominal0 = (1 << priv->data->param->resolution) / 4;
> +	nominal1 = (1 << priv->data->param->resolution) * 3 / 4;
>  
>  	meson_sar_adc_set_chan7_mux(indio_dev, CHAN7_MUX_VDD_DIV4);
>  	usleep_range(10, 20);
> @@ -881,48 +886,52 @@ static const struct iio_info meson_sar_adc_iio_info = {
>  	.read_raw = meson_sar_adc_iio_info_read_raw,
>  };
>  
> -static const struct meson_sar_adc_data meson_sar_adc_meson8_data = {
> -	.has_bl30_integration = false,
> -	.clock_rate = 1150000,
> -	.bandgap_reg = MESON_SAR_ADC_DELTA_10,
> -	.regmap_config = &meson_sar_adc_regmap_config_meson8,
> -	.resolution = 10,
> -	.name = "meson-meson8-saradc",
> -};
> -
> -static const struct meson_sar_adc_data meson_sar_adc_meson8b_data = {
> +static const struct meson_sar_adc_param meson_sar_adc_meson8_param = {
>  	.has_bl30_integration = false,
>  	.clock_rate = 1150000,
>  	.bandgap_reg = MESON_SAR_ADC_DELTA_10,
>  	.regmap_config = &meson_sar_adc_regmap_config_meson8,
>  	.resolution = 10,
> -	.name = "meson-meson8b-saradc",
>  };
>  
> -static const struct meson_sar_adc_data meson_sar_adc_gxbb_data = {
> +static const struct meson_sar_adc_param meson_sar_adc_gxbb_param = {
>  	.has_bl30_integration = true,
>  	.clock_rate = 1200000,
>  	.bandgap_reg = MESON_SAR_ADC_REG11,
>  	.regmap_config = &meson_sar_adc_regmap_config_gxbb,
>  	.resolution = 10,
> -	.name = "meson-gxbb-saradc",
>  };
>  
> -static const struct meson_sar_adc_data meson_sar_adc_gxl_data = {
> +static const struct meson_sar_adc_param meson_sar_adc_gxl_param = {
>  	.has_bl30_integration = true,
>  	.clock_rate = 1200000,
>  	.bandgap_reg = MESON_SAR_ADC_REG11,
>  	.regmap_config = &meson_sar_adc_regmap_config_gxbb,
>  	.resolution = 12,
> +};
> +
> +static const struct meson_sar_adc_data meson_sar_adc_meson8_data = {
> +	.param = &meson_sar_adc_meson8_param,
> +	.name = "meson-meson8-saradc",
> +};
> +
> +static const struct meson_sar_adc_data meson_sar_adc_meson8b_data = {
> +	.param = &meson_sar_adc_meson8_param,
> +	.name = "meson-meson8b-saradc",
> +};
> +
> +static const struct meson_sar_adc_data meson_sar_adc_gxbb_data = {
> +	.param = &meson_sar_adc_gxbb_param,
> +	.name = "meson-gxbb-saradc",
> +};
> +
> +static const struct meson_sar_adc_data meson_sar_adc_gxl_data = {
> +	.param = &meson_sar_adc_gxl_param,
>  	.name = "meson-gxl-saradc",
>  };
>  
>  static const struct meson_sar_adc_data meson_sar_adc_gxm_data = {
> -	.has_bl30_integration = true,
> -	.clock_rate = 1200000,
> -	.bandgap_reg = MESON_SAR_ADC_REG11,
> -	.regmap_config = &meson_sar_adc_regmap_config_gxbb,
> -	.resolution = 12,
> +	.param = &meson_sar_adc_gxl_param,
>  	.name = "meson-gxm-saradc",
>  };
>  
> @@ -999,7 +1008,7 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
>  		return ret;
>  
>  	priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
> -					     priv->data->regmap_config);
> +					     priv->data->param->regmap_config);
>  	if (IS_ERR(priv->regmap))
>  		return PTR_ERR(priv->regmap);
>
Yixun Lan March 30, 2018, 10:37 a.m. UTC | #2
On 03/30/18 17:48, Jonathan Cameron wrote:
> On Mon, 26 Mar 2018 16:46:27 +0800
> Yixun Lan <yixun.lan@amlogic.com> wrote:
> 
>> Extract and promote common adc platform data into a new structure,
>> to make it better share the info between several SoCs,
>> this will avoid duplicating the code all over the place,
>> Save a few memory and make the code more maintainable.
>>
>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> Applied to the togreg branch of iio.git and pushed out as testing
> for the autobuilders to play with it.

Hi Jonathan

  Great! Thanks for taking these

Yixun
Martin Blumenstingl March 30, 2018, 11:06 a.m. UTC | #3
On Mon, Mar 26, 2018 at 10:46 AM, Yixun Lan <yixun.lan@amlogic.com> wrote:
> Extract and promote common adc platform data into a new structure,
> to make it better share the info between several SoCs,
> this will avoid duplicating the code all over the place,
> Save a few memory and make the code more maintainable.
>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

this will also help me when I add support for the internal temperature
sensor (as Meson8b and Meson8m2 share the same settings, except the
name)

> ---
>  drivers/iio/adc/meson_saradc.c | 75 +++++++++++++++++++++++-------------------
>  1 file changed, 42 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
> index 29fa7736d80c..799ed929ab99 100644
> --- a/drivers/iio/adc/meson_saradc.c
> +++ b/drivers/iio/adc/meson_saradc.c
> @@ -219,15 +219,19 @@ enum meson_sar_adc_chan7_mux_sel {
>         CHAN7_MUX_CH7_INPUT = 0x7,
>  };
>
> -struct meson_sar_adc_data {
> +struct meson_sar_adc_param {
>         bool                                    has_bl30_integration;
>         unsigned long                           clock_rate;
>         u32                                     bandgap_reg;
>         unsigned int                            resolution;
> -       const char                              *name;
>         const struct regmap_config              *regmap_config;
>  };
>
> +struct meson_sar_adc_data {
> +       const struct meson_sar_adc_param        *param;
> +       const char                              *name;
> +};
> +
>  struct meson_sar_adc_priv {
>         struct regmap                           *regmap;
>         struct regulator                        *vref;
> @@ -276,7 +280,7 @@ static int meson_sar_adc_calib_val(struct iio_dev *indio_dev, int val)
>         /* use val_calib = scale * val_raw + offset calibration function */
>         tmp = div_s64((s64)val * priv->calibscale, MILLION) + priv->calibbias;
>
> -       return clamp(tmp, 0, (1 << priv->data->resolution) - 1);
> +       return clamp(tmp, 0, (1 << priv->data->param->resolution) - 1);
>  }
>
>  static int meson_sar_adc_wait_busy_clear(struct iio_dev *indio_dev)
> @@ -328,7 +332,7 @@ static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev,
>         }
>
>         fifo_val = FIELD_GET(MESON_SAR_ADC_FIFO_RD_SAMPLE_VALUE_MASK, regval);
> -       fifo_val &= GENMASK(priv->data->resolution - 1, 0);
> +       fifo_val &= GENMASK(priv->data->param->resolution - 1, 0);
>         *val = meson_sar_adc_calib_val(indio_dev, fifo_val);
>
>         return 0;
> @@ -447,7 +451,7 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev)
>
>         mutex_lock(&indio_dev->mlock);
>
> -       if (priv->data->has_bl30_integration) {
> +       if (priv->data->param->has_bl30_integration) {
>                 /* prevent BL30 from using the SAR ADC while we are using it */
>                 regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY,
>                                 MESON_SAR_ADC_DELAY_KERNEL_BUSY,
> @@ -473,7 +477,7 @@ static void meson_sar_adc_unlock(struct iio_dev *indio_dev)
>  {
>         struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
>
> -       if (priv->data->has_bl30_integration)
> +       if (priv->data->param->has_bl30_integration)
>                 /* allow BL30 to use the SAR ADC again */
>                 regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY,
>                                 MESON_SAR_ADC_DELAY_KERNEL_BUSY, 0);
> @@ -557,7 +561,7 @@ static int meson_sar_adc_iio_info_read_raw(struct iio_dev *indio_dev,
>                 }
>
>                 *val = ret / 1000;
> -               *val2 = priv->data->resolution;
> +               *val2 = priv->data->param->resolution;
>                 return IIO_VAL_FRACTIONAL_LOG2;
>
>         case IIO_CHAN_INFO_CALIBBIAS:
> @@ -630,7 +634,7 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
>          */
>         meson_sar_adc_set_chan7_mux(indio_dev, CHAN7_MUX_CH7_INPUT);
>
> -       if (priv->data->has_bl30_integration) {
> +       if (priv->data->param->has_bl30_integration) {
>                 /*
>                  * leave sampling delay and the input clocks as configured by
>                  * BL30 to make sure BL30 gets the values it expects when
> @@ -710,7 +714,7 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
>                 return ret;
>         }
>
> -       ret = clk_set_rate(priv->adc_clk, priv->data->clock_rate);
> +       ret = clk_set_rate(priv->adc_clk, priv->data->param->clock_rate);
>         if (ret) {
>                 dev_err(indio_dev->dev.parent,
>                         "failed to set adc clock rate\n");
> @@ -723,14 +727,15 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
>  static void meson_sar_adc_set_bandgap(struct iio_dev *indio_dev, bool on_off)
>  {
>         struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
> +       const struct meson_sar_adc_param *param = priv->data->param;
>         u32 enable_mask;
>
> -       if (priv->data->bandgap_reg == MESON_SAR_ADC_REG11)
> +       if (param->bandgap_reg == MESON_SAR_ADC_REG11)
>                 enable_mask = MESON_SAR_ADC_REG11_BANDGAP_EN;
>         else
>                 enable_mask = MESON_SAR_ADC_DELTA_10_TS_VBG_EN;
>
> -       regmap_update_bits(priv->regmap, priv->data->bandgap_reg, enable_mask,
> +       regmap_update_bits(priv->regmap, param->bandgap_reg, enable_mask,
>                            on_off ? enable_mask : 0);
>  }
>
> @@ -842,8 +847,8 @@ static int meson_sar_adc_calib(struct iio_dev *indio_dev)
>         int ret, nominal0, nominal1, value0, value1;
>
>         /* use points 25% and 75% for calibration */
> -       nominal0 = (1 << priv->data->resolution) / 4;
> -       nominal1 = (1 << priv->data->resolution) * 3 / 4;
> +       nominal0 = (1 << priv->data->param->resolution) / 4;
> +       nominal1 = (1 << priv->data->param->resolution) * 3 / 4;
>
>         meson_sar_adc_set_chan7_mux(indio_dev, CHAN7_MUX_VDD_DIV4);
>         usleep_range(10, 20);
> @@ -881,48 +886,52 @@ static const struct iio_info meson_sar_adc_iio_info = {
>         .read_raw = meson_sar_adc_iio_info_read_raw,
>  };
>
> -static const struct meson_sar_adc_data meson_sar_adc_meson8_data = {
> -       .has_bl30_integration = false,
> -       .clock_rate = 1150000,
> -       .bandgap_reg = MESON_SAR_ADC_DELTA_10,
> -       .regmap_config = &meson_sar_adc_regmap_config_meson8,
> -       .resolution = 10,
> -       .name = "meson-meson8-saradc",
> -};
> -
> -static const struct meson_sar_adc_data meson_sar_adc_meson8b_data = {
> +static const struct meson_sar_adc_param meson_sar_adc_meson8_param = {
>         .has_bl30_integration = false,
>         .clock_rate = 1150000,
>         .bandgap_reg = MESON_SAR_ADC_DELTA_10,
>         .regmap_config = &meson_sar_adc_regmap_config_meson8,
>         .resolution = 10,
> -       .name = "meson-meson8b-saradc",
>  };
>
> -static const struct meson_sar_adc_data meson_sar_adc_gxbb_data = {
> +static const struct meson_sar_adc_param meson_sar_adc_gxbb_param = {
>         .has_bl30_integration = true,
>         .clock_rate = 1200000,
>         .bandgap_reg = MESON_SAR_ADC_REG11,
>         .regmap_config = &meson_sar_adc_regmap_config_gxbb,
>         .resolution = 10,
> -       .name = "meson-gxbb-saradc",
>  };
>
> -static const struct meson_sar_adc_data meson_sar_adc_gxl_data = {
> +static const struct meson_sar_adc_param meson_sar_adc_gxl_param = {
>         .has_bl30_integration = true,
>         .clock_rate = 1200000,
>         .bandgap_reg = MESON_SAR_ADC_REG11,
>         .regmap_config = &meson_sar_adc_regmap_config_gxbb,
>         .resolution = 12,
> +};
> +
> +static const struct meson_sar_adc_data meson_sar_adc_meson8_data = {
> +       .param = &meson_sar_adc_meson8_param,
> +       .name = "meson-meson8-saradc",
> +};
> +
> +static const struct meson_sar_adc_data meson_sar_adc_meson8b_data = {
> +       .param = &meson_sar_adc_meson8_param,
> +       .name = "meson-meson8b-saradc",
> +};
> +
> +static const struct meson_sar_adc_data meson_sar_adc_gxbb_data = {
> +       .param = &meson_sar_adc_gxbb_param,
> +       .name = "meson-gxbb-saradc",
> +};
> +
> +static const struct meson_sar_adc_data meson_sar_adc_gxl_data = {
> +       .param = &meson_sar_adc_gxl_param,
>         .name = "meson-gxl-saradc",
>  };
>
>  static const struct meson_sar_adc_data meson_sar_adc_gxm_data = {
> -       .has_bl30_integration = true,
> -       .clock_rate = 1200000,
> -       .bandgap_reg = MESON_SAR_ADC_REG11,
> -       .regmap_config = &meson_sar_adc_regmap_config_gxbb,
> -       .resolution = 12,
> +       .param = &meson_sar_adc_gxl_param,
>         .name = "meson-gxm-saradc",
>  };
>
> @@ -999,7 +1008,7 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
>                 return ret;
>
>         priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
> -                                            priv->data->regmap_config);
> +                                            priv->data->param->regmap_config);
>         if (IS_ERR(priv->regmap))
>                 return PTR_ERR(priv->regmap);
>
> --
> 2.15.1
>
diff mbox

Patch

diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 29fa7736d80c..799ed929ab99 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -219,15 +219,19 @@  enum meson_sar_adc_chan7_mux_sel {
 	CHAN7_MUX_CH7_INPUT = 0x7,
 };
 
-struct meson_sar_adc_data {
+struct meson_sar_adc_param {
 	bool					has_bl30_integration;
 	unsigned long				clock_rate;
 	u32					bandgap_reg;
 	unsigned int				resolution;
-	const char				*name;
 	const struct regmap_config		*regmap_config;
 };
 
+struct meson_sar_adc_data {
+	const struct meson_sar_adc_param	*param;
+	const char				*name;
+};
+
 struct meson_sar_adc_priv {
 	struct regmap				*regmap;
 	struct regulator			*vref;
@@ -276,7 +280,7 @@  static int meson_sar_adc_calib_val(struct iio_dev *indio_dev, int val)
 	/* use val_calib = scale * val_raw + offset calibration function */
 	tmp = div_s64((s64)val * priv->calibscale, MILLION) + priv->calibbias;
 
-	return clamp(tmp, 0, (1 << priv->data->resolution) - 1);
+	return clamp(tmp, 0, (1 << priv->data->param->resolution) - 1);
 }
 
 static int meson_sar_adc_wait_busy_clear(struct iio_dev *indio_dev)
@@ -328,7 +332,7 @@  static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev,
 	}
 
 	fifo_val = FIELD_GET(MESON_SAR_ADC_FIFO_RD_SAMPLE_VALUE_MASK, regval);
-	fifo_val &= GENMASK(priv->data->resolution - 1, 0);
+	fifo_val &= GENMASK(priv->data->param->resolution - 1, 0);
 	*val = meson_sar_adc_calib_val(indio_dev, fifo_val);
 
 	return 0;
@@ -447,7 +451,7 @@  static int meson_sar_adc_lock(struct iio_dev *indio_dev)
 
 	mutex_lock(&indio_dev->mlock);
 
-	if (priv->data->has_bl30_integration) {
+	if (priv->data->param->has_bl30_integration) {
 		/* prevent BL30 from using the SAR ADC while we are using it */
 		regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY,
 				MESON_SAR_ADC_DELAY_KERNEL_BUSY,
@@ -473,7 +477,7 @@  static void meson_sar_adc_unlock(struct iio_dev *indio_dev)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
 
-	if (priv->data->has_bl30_integration)
+	if (priv->data->param->has_bl30_integration)
 		/* allow BL30 to use the SAR ADC again */
 		regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY,
 				MESON_SAR_ADC_DELAY_KERNEL_BUSY, 0);
@@ -557,7 +561,7 @@  static int meson_sar_adc_iio_info_read_raw(struct iio_dev *indio_dev,
 		}
 
 		*val = ret / 1000;
-		*val2 = priv->data->resolution;
+		*val2 = priv->data->param->resolution;
 		return IIO_VAL_FRACTIONAL_LOG2;
 
 	case IIO_CHAN_INFO_CALIBBIAS:
@@ -630,7 +634,7 @@  static int meson_sar_adc_init(struct iio_dev *indio_dev)
 	 */
 	meson_sar_adc_set_chan7_mux(indio_dev, CHAN7_MUX_CH7_INPUT);
 
-	if (priv->data->has_bl30_integration) {
+	if (priv->data->param->has_bl30_integration) {
 		/*
 		 * leave sampling delay and the input clocks as configured by
 		 * BL30 to make sure BL30 gets the values it expects when
@@ -710,7 +714,7 @@  static int meson_sar_adc_init(struct iio_dev *indio_dev)
 		return ret;
 	}
 
-	ret = clk_set_rate(priv->adc_clk, priv->data->clock_rate);
+	ret = clk_set_rate(priv->adc_clk, priv->data->param->clock_rate);
 	if (ret) {
 		dev_err(indio_dev->dev.parent,
 			"failed to set adc clock rate\n");
@@ -723,14 +727,15 @@  static int meson_sar_adc_init(struct iio_dev *indio_dev)
 static void meson_sar_adc_set_bandgap(struct iio_dev *indio_dev, bool on_off)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+	const struct meson_sar_adc_param *param = priv->data->param;
 	u32 enable_mask;
 
-	if (priv->data->bandgap_reg == MESON_SAR_ADC_REG11)
+	if (param->bandgap_reg == MESON_SAR_ADC_REG11)
 		enable_mask = MESON_SAR_ADC_REG11_BANDGAP_EN;
 	else
 		enable_mask = MESON_SAR_ADC_DELTA_10_TS_VBG_EN;
 
-	regmap_update_bits(priv->regmap, priv->data->bandgap_reg, enable_mask,
+	regmap_update_bits(priv->regmap, param->bandgap_reg, enable_mask,
 			   on_off ? enable_mask : 0);
 }
 
@@ -842,8 +847,8 @@  static int meson_sar_adc_calib(struct iio_dev *indio_dev)
 	int ret, nominal0, nominal1, value0, value1;
 
 	/* use points 25% and 75% for calibration */
-	nominal0 = (1 << priv->data->resolution) / 4;
-	nominal1 = (1 << priv->data->resolution) * 3 / 4;
+	nominal0 = (1 << priv->data->param->resolution) / 4;
+	nominal1 = (1 << priv->data->param->resolution) * 3 / 4;
 
 	meson_sar_adc_set_chan7_mux(indio_dev, CHAN7_MUX_VDD_DIV4);
 	usleep_range(10, 20);
@@ -881,48 +886,52 @@  static const struct iio_info meson_sar_adc_iio_info = {
 	.read_raw = meson_sar_adc_iio_info_read_raw,
 };
 
-static const struct meson_sar_adc_data meson_sar_adc_meson8_data = {
-	.has_bl30_integration = false,
-	.clock_rate = 1150000,
-	.bandgap_reg = MESON_SAR_ADC_DELTA_10,
-	.regmap_config = &meson_sar_adc_regmap_config_meson8,
-	.resolution = 10,
-	.name = "meson-meson8-saradc",
-};
-
-static const struct meson_sar_adc_data meson_sar_adc_meson8b_data = {
+static const struct meson_sar_adc_param meson_sar_adc_meson8_param = {
 	.has_bl30_integration = false,
 	.clock_rate = 1150000,
 	.bandgap_reg = MESON_SAR_ADC_DELTA_10,
 	.regmap_config = &meson_sar_adc_regmap_config_meson8,
 	.resolution = 10,
-	.name = "meson-meson8b-saradc",
 };
 
-static const struct meson_sar_adc_data meson_sar_adc_gxbb_data = {
+static const struct meson_sar_adc_param meson_sar_adc_gxbb_param = {
 	.has_bl30_integration = true,
 	.clock_rate = 1200000,
 	.bandgap_reg = MESON_SAR_ADC_REG11,
 	.regmap_config = &meson_sar_adc_regmap_config_gxbb,
 	.resolution = 10,
-	.name = "meson-gxbb-saradc",
 };
 
-static const struct meson_sar_adc_data meson_sar_adc_gxl_data = {
+static const struct meson_sar_adc_param meson_sar_adc_gxl_param = {
 	.has_bl30_integration = true,
 	.clock_rate = 1200000,
 	.bandgap_reg = MESON_SAR_ADC_REG11,
 	.regmap_config = &meson_sar_adc_regmap_config_gxbb,
 	.resolution = 12,
+};
+
+static const struct meson_sar_adc_data meson_sar_adc_meson8_data = {
+	.param = &meson_sar_adc_meson8_param,
+	.name = "meson-meson8-saradc",
+};
+
+static const struct meson_sar_adc_data meson_sar_adc_meson8b_data = {
+	.param = &meson_sar_adc_meson8_param,
+	.name = "meson-meson8b-saradc",
+};
+
+static const struct meson_sar_adc_data meson_sar_adc_gxbb_data = {
+	.param = &meson_sar_adc_gxbb_param,
+	.name = "meson-gxbb-saradc",
+};
+
+static const struct meson_sar_adc_data meson_sar_adc_gxl_data = {
+	.param = &meson_sar_adc_gxl_param,
 	.name = "meson-gxl-saradc",
 };
 
 static const struct meson_sar_adc_data meson_sar_adc_gxm_data = {
-	.has_bl30_integration = true,
-	.clock_rate = 1200000,
-	.bandgap_reg = MESON_SAR_ADC_REG11,
-	.regmap_config = &meson_sar_adc_regmap_config_gxbb,
-	.resolution = 12,
+	.param = &meson_sar_adc_gxl_param,
 	.name = "meson-gxm-saradc",
 };
 
@@ -999,7 +1008,7 @@  static int meson_sar_adc_probe(struct platform_device *pdev)
 		return ret;
 
 	priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
-					     priv->data->regmap_config);
+					     priv->data->param->regmap_config);
 	if (IS_ERR(priv->regmap))
 		return PTR_ERR(priv->regmap);