diff mbox

[1/3] dt-bindings: interrupt-controller: fix the double quotes

Message ID 20180408145700.23520-2-yixun.lan@amlogic.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Yixun Lan April 8, 2018, 2:56 p.m. UTC
The double quotes seems not ASCII type, fix it here.

Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 .../bindings/interrupt-controller/amlogic,meson-gpio-intc.txt  | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

Comments

Rob Herring (Arm) April 13, 2018, 5:18 p.m. UTC | #1
On Sun, Apr 08, 2018 at 02:56:58PM +0000, Yixun Lan wrote:
> The double quotes seems not ASCII type, fix it here.
> 
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> ---
>  .../bindings/interrupt-controller/amlogic,meson-gpio-intc.txt  | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
index a83f9a5734ca..c753d99d43db 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
@@ -9,11 +9,11 @@  number of interrupt exposed depends on the SoC.
 
 Required properties:
 
-- compatible : must have "amlogic,meson8-gpio-intc” and either
-   “amlogic,meson8-gpio-intc” for meson8 SoCs (S802) or
-   “amlogic,meson8b-gpio-intc” for meson8b SoCs (S805) or
-   “amlogic,meson-gxbb-gpio-intc” for GXBB SoCs (S905) or
-   “amlogic,meson-gxl-gpio-intc” for GXL SoCs (S905X, S912)
+- compatible : must have "amlogic,meson8-gpio-intc" and either
+    "amlogic,meson8-gpio-intc" for meson8 SoCs (S802) or
+    "amlogic,meson8b-gpio-intc" for meson8b SoCs (S805) or
+    "amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or
+    "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912)
 - interrupt-parent : a phandle to the GIC the interrupts are routed to.
    Usually this is provided at the root level of the device tree as it is
    common to most of the SoC.