| Message ID | 20180624182814.31691-4-martin.blumenstingl@googlemail.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Sun, Jun 24, 2018 at 08:28:12PM +0200, Martin Blumenstingl wrote: > The Tanix TX3 Mini is a TV box based on the Amlogic S905W chipset. It > comes with: > - 1 GiB or 2 GiB of DDR3 memory depending on the model > - 8 GB or 16 GB eMMC flash depending on the model > - 802.11 b/g/n wifi (Silicon Valley Microelectronics SSV6051, does not > support Bluetooth, not supported by any mailine driver) > - an LED 7 segment display with an FD628 controller (not supported by > any mainline driver) > - HDMI and AV (CVBS) output > - 2x USB (utilizing both USB ports provided by the SoC) > - micro SD card slot > > The board seems to be very similar to the P23x and Q20x reference > boards: > - eMMC reset routed to BOOT_9 > - the SDIO wifi chip's reset line is routed to GPIOX_6 and the reference > clock is 32.768KHz on PWM_E > - SD card detection is routed to CARD_6 > - vqmmc of all MMC controllers is hard-wired to 1.8V (VDDIO_BOOT) > - uart_AO can be accessed after opening the case and soldering RX, TX > and GND lines onto the exposed solder points (marked with RX, TX and > GND) > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > --- > Documentation/devicetree/bindings/arm/amlogic.txt | 1 + > 1 file changed, 1 insertion(+) Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 33c672284963..79b8ebe08444 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -84,6 +84,7 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,p231" (Meson gxl s905d) - "amlogic,p281" (Meson gxl s905w) + - "oranth,tx3-mini" (Meson gxl s905w) - "amlogic,q200" (Meson gxm s912) - "amlogic,q201" (Meson gxm s912)
The Tanix TX3 Mini is a TV box based on the Amlogic S905W chipset. It comes with: - 1 GiB or 2 GiB of DDR3 memory depending on the model - 8 GB or 16 GB eMMC flash depending on the model - 802.11 b/g/n wifi (Silicon Valley Microelectronics SSV6051, does not support Bluetooth, not supported by any mailine driver) - an LED 7 segment display with an FD628 controller (not supported by any mainline driver) - HDMI and AV (CVBS) output - 2x USB (utilizing both USB ports provided by the SoC) - micro SD card slot The board seems to be very similar to the P23x and Q20x reference boards: - eMMC reset routed to BOOT_9 - the SDIO wifi chip's reset line is routed to GPIOX_6 and the reference clock is 32.768KHz on PWM_E - SD card detection is routed to CARD_6 - vqmmc of all MMC controllers is hard-wired to 1.8V (VDDIO_BOOT) - uart_AO can be accessed after opening the case and soldering RX, TX and GND lines onto the exposed solder points (marked with RX, TX and GND) Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- Documentation/devicetree/bindings/arm/amlogic.txt | 1 + 1 file changed, 1 insertion(+)