| Message ID | 20180625125653.3404-1-jbrunet@baylibre.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
On 25/06/2018 14:56, Jerome Brunet wrote: > Like the odroid-c2 and wetek, the s400 uses the RTL8211F and seems to > suffer from the kind of stability issue. > > Doing an iperf3 download test, we can see a significant number of LPI > interrupts on the tx path. After a short while (5 to 15 seconds), the > network connection dies. If using rootfs over NFS, the connection may > also break during the boot sequence. > > We still don't have a real explanation for this problem so let's disable > EEE once again. > > Fixes: f6f6ac914b82 ("ARM64: dts: meson-axg: enable ethernet for A113D S400 board") > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> > --- > arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 15 ++++++++++++++- > 1 file changed, 14 insertions(+), 1 deletion(-) > [...] Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Neil Armstrong <narmstrong@baylibre.com> writes: > On 25/06/2018 14:56, Jerome Brunet wrote: >> Like the odroid-c2 and wetek, the s400 uses the RTL8211F and seems to >> suffer from the kind of stability issue. >> >> Doing an iperf3 download test, we can see a significant number of LPI >> interrupts on the tx path. After a short while (5 to 15 seconds), the >> network connection dies. If using rootfs over NFS, the connection may >> also break during the boot sequence. >> >> We still don't have a real explanation for this problem so let's disable >> EEE once again. >> >> Fixes: f6f6ac914b82 ("ARM64: dts: meson-axg: enable ethernet for A113D S400 board") >> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> >> --- >> arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 15 ++++++++++++++- >> 1 file changed, 14 insertions(+), 1 deletion(-) >> > [...] > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Applied to v4.18/fixes (which I'll be sending upstream today.) Kevin
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index 4b3331fbfe39..dff9b15eb3c0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -66,9 +66,22 @@ ðmac { status = "okay"; - phy-mode = "rgmii"; pinctrl-0 = <ð_rgmii_y_pins>; pinctrl-names = "default"; + phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + eee-broken-1000t; + }; + }; }; &uart_A {
Like the odroid-c2 and wetek, the s400 uses the RTL8211F and seems to suffer from the kind of stability issue. Doing an iperf3 download test, we can see a significant number of LPI interrupts on the tx path. After a short while (5 to 15 seconds), the network connection dies. If using rootfs over NFS, the connection may also break during the boot sequence. We still don't have a real explanation for this problem so let's disable EEE once again. Fixes: f6f6ac914b82 ("ARM64: dts: meson-axg: enable ethernet for A113D S400 board") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)