[v2,2/2] clk: meson: meson8b: use the regmap in the internal reset controller

Commit Message

Martin Blumenstingl Sept. 1, 2018, 4:21 p.m. UTC

For now the reset controller was using raw register access because the
early init did not initialize the regmap. However, now that clocks are
initialized early we can simply use the regmap also for the reset
controller.
No functional changes.

Signed-off-by: Martin Blumenstingl <[e-mail]>
---
 drivers/clk/meson/meson8b.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

Patch

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index abdcfe54f6a0..ed1de34fee0e 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -23,7 +23,7 @@  static DEFINE_SPINLOCK(meson_clk_lock);
 
 struct meson8b_clk_reset {
 	struct reset_controller_dev reset;
-	void __iomem *base;
+	struct regmap *regmap;
 };
 
 static const struct pll_params_table sys_pll_params_table[] = {
@@ -1076,7 +1076,6 @@  static int meson8b_clk_reset_update(struct reset_controller_dev *rcdev,
 		container_of(rcdev, struct meson8b_clk_reset, reset);
 	unsigned long flags;
 	const struct meson8b_clk_reset_line *reset;
-	u32 val;
 
 	if (id >= ARRAY_SIZE(meson8b_clk_reset_bits))
 		return -EINVAL;
@@ -1085,12 +1084,12 @@  static int meson8b_clk_reset_update(struct reset_controller_dev *rcdev,
 
 	spin_lock_irqsave(&meson_clk_lock, flags);
 
-	val = readl(meson8b_clk_reset->base + reset->reg);
 	if (assert)
-		val |= BIT(reset->bit_idx);
+		regmap_update_bits(meson8b_clk_reset->regmap, reset->reg,
+				   BIT(reset->bit_idx), BIT(reset->bit_idx));
 	else
-		val &= ~BIT(reset->bit_idx);
-	writel(val, meson8b_clk_reset->base + reset->reg);
+		regmap_update_bits(meson8b_clk_reset->regmap, reset->reg,
+				   BIT(reset->bit_idx), 0);
 
 	spin_unlock_irqrestore(&meson_clk_lock, flags);
 
@@ -1143,7 +1142,7 @@  static void __init meson8b_clkc_init(struct device_node *np)
 		return;
 
 	/* Reset Controller */
-	rstc->base = clk_base;
+	rstc->regmap = map;
 	rstc->reset.ops = &meson8b_clk_reset_ops;
 	rstc->reset.nr_resets = ARRAY_SIZE(meson8b_clk_reset_bits);
 	rstc->reset.of_node = np;