diff mbox series

[3/3] clk: meson-g12a: add PCIE PLL clocks

Message ID 20190307141455.23879-4-narmstrong@baylibre.com (mailing list archive)
State Not Applicable
Delegated to: Neil Armstrong
Headers show
Series clk: meson: add support for PCIE PLL | expand

Commit Message

Neil Armstrong March 7, 2019, 2:14 p.m. UTC
Add the PCIe reference clock feeding the USB3 + PCIE combo PHY.

This PLL needs a very precise register sequence to permit to be locked,
thus using the specific clk-pll pcie ops.

The PLL is then followed by :
- a fixed /2 divider
- a 5-bit 1-based divider
- a final /2 divider

This reference clock is fixed to 100MHz, thus only a single PLL setup
is added.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/clk/meson/g12a.c | 118 +++++++++++++++++++++++++++++++++++++++
 drivers/clk/meson/g12a.h |   5 +-
 2 files changed, 122 insertions(+), 1 deletion(-)

Comments

Jerome Brunet March 19, 2019, 9:55 a.m. UTC | #1
On Thu, 2019-03-07 at 15:14 +0100, Neil Armstrong wrote:
> Add the PCIe reference clock feeding the USB3 + PCIE combo PHY.
> 
> This PLL needs a very precise register sequence to permit to be locked,
> thus using the specific clk-pll pcie ops.
> 
> The PLL is then followed by :
> - a fixed /2 divider
> - a 5-bit 1-based divider
> - a final /2 divider
> 
> This reference clock is fixed to 100MHz, thus only a single PLL setup
> is added.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  drivers/clk/meson/g12a.c | 118 +++++++++++++++++++++++++++++++++++++++
>  drivers/clk/meson/g12a.h |   5 +-
>  2 files changed, 122 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
> index 80a7172df2a6..d382c21a29e5 100644
> --- a/drivers/clk/meson/g12a.c
> +++ b/drivers/clk/meson/g12a.c
> @@ -614,6 +614,118 @@ static struct clk_regmap g12a_hifi_pll = {
>  	},
>  };
>  
> +/*
> + * The Meson G12A PCIE PLL is fined tuned to deliver a very precise
> + * 100MHz reference clock for the PCIe Analog PHY, and thus requires
> + * a strict register sequence to enable the PLL.
> + */
> +static const struct reg_sequence g12a_pcie_pll_init_regs[] = {
> +	{ .reg = HHI_PCIE_PLL_CNTL0,	.def = 0x20090496 },
> +	{ .reg = HHI_PCIE_PLL_CNTL0,	.def = 0x30090496 },
> +	{ .reg = HHI_PCIE_PLL_CNTL1,	.def = 0x00000000 },
> +	{ .reg = HHI_PCIE_PLL_CNTL2,	.def = 0x00001100 },
> +	{ .reg = HHI_PCIE_PLL_CNTL3,	.def = 0x10058e00 },
> +	{ .reg = HHI_PCIE_PLL_CNTL4,	.def = 0x000100c0 },
> +	{ .reg = HHI_PCIE_PLL_CNTL5,	.def = 0x68000048 },
> +	{ .reg = HHI_PCIE_PLL_CNTL5,	.def = 0x68000068, .delay_us = 20 },
> +	{ .reg = HHI_PCIE_PLL_CNTL4,	.def = 0x008100c0, .delay_us = 10 },
> +	{ .reg = HHI_PCIE_PLL_CNTL0,	.def = 0x34090496 },
> +	{ .reg = HHI_PCIE_PLL_CNTL0,	.def = 0x14090496, .delay_us = 10 },
> +	{ .reg = HHI_PCIE_PLL_CNTL2,	.def = 0x00001000 },
> +};
> +
> +/* Keep a single entry table for recalc/round_rate() ops */
> +static const struct pll_params_table g12a_pcie_pll_table[] = {
> +	PLL_PARAMS(150, 1),
> +	{0, 0},
> +};
> +
> +static struct clk_regmap g12a_pcie_pll_dco = {
> +	.data = &(struct meson_clk_pll_data){
> +		.en = {
> +			.reg_off = HHI_PCIE_PLL_CNTL0,
> +			.shift   = 28,
> +			.width   = 1,
> +		},
> +		.m = {
> +			.reg_off = HHI_PCIE_PLL_CNTL0,
> +			.shift   = 0,
> +			.width   = 8,
> +		},
> +		.n = {
> +			.reg_off = HHI_PCIE_PLL_CNTL0,
> +			.shift   = 10,
> +			.width   = 5,
> +		},
> +		.frac = {
> +			.reg_off = HHI_PCIE_PLL_CNTL1,
> +			.shift   = 0,
> +			.width   = 12,
> +		},
> +		.l = {
> +			.reg_off = HHI_PCIE_PLL_CNTL0,
> +			.shift   = 31,
> +			.width   = 1,
> +		},
> +		.rst = {
> +			.reg_off = HHI_PCIE_PLL_CNTL0,
> +			.shift   = 29,
> +			.width   = 1,
> +		},
> +		.table = g12a_pcie_pll_table,
> +		.init_regs = g12a_pcie_pll_init_regs,
> +		.init_count = ARRAY_SIZE(g12a_pcie_pll_init_regs),
> +	},
> +	.hw.init = &(struct clk_init_data){
> +		.name = "pcie_pll_dco",
> +		.ops = &meson_clk_pcie_pll_ops,
> +		.parent_names = (const char *[]){ IN_PREFIX "xtal" },
> +		.num_parents = 1,
> +	},
> +};
> +
> +static struct clk_fixed_factor g12a_pcie_pll_dco_div2 = {
> +	.mult = 1,
> +	.div = 2,
> +	.hw.init = &(struct clk_init_data){
> +		.name = "pcie_pll_dco_div2",
> +		.ops = &clk_fixed_factor_ops,
> +		.parent_names = (const char *[]){ "pcie_pll_dco" },
> +		.num_parents = 1,
> +		.flags = CLK_SET_RATE_PARENT,
> +	},
> +};
> +
> +static struct clk_regmap g12a_pcie_pll_od = {
> +	.data = &(struct clk_regmap_div_data){
> +		.offset = HHI_PCIE_PLL_CNTL0,
> +		.shift = 16,
> +		.width = 5,
> +		.flags = CLK_DIVIDER_ROUND_CLOSEST |
> +			 CLK_DIVIDER_ONE_BASED |
> +			 CLK_DIVIDER_ALLOW_ZERO,

That's unusual !
Ods have always been power of two divider so far. I suppose you have noticed
and checked this as well ?

That being said, the doc seems to imply that the global post divider will
divide by 36, which seems difficult to reach with powers of two.

> +	},
> +	.hw.init = &(struct clk_init_data){
> +		.name = "pcie_pll_od",
> +		.ops = &clk_regmap_divider_ops,
> +		.parent_names = (const char *[]){ "pcie_pll_dco_div2" },
> +		.num_parents = 1,
> +		.flags = CLK_SET_RATE_PARENT,
> +	},
> +};
> +
> +static struct clk_fixed_factor g12a_pcie_pll = {
> +	.mult = 1,
> +	.div = 2,
> +	.hw.init = &(struct clk_init_data){
> +		.name = "pcie_pll_pll",
> +		.ops = &clk_fixed_factor_ops,
> +		.parent_names = (const char *[]){ "pcie_pll_od" },
> +		.num_parents = 1,
> +		.flags = CLK_SET_RATE_PARENT,
> +	},
> +};
> +
>  static struct clk_regmap g12a_hdmi_pll_dco = {
>  	.data = &(struct meson_clk_pll_data){
>  		.en = {
> @@ -2499,6 +2611,10 @@ static struct clk_hw_onecell_data g12a_hw_onecell_data = {
>  		[CLKID_CPU_CLK_AXI]		= &g12a_cpu_clk_axi.hw,
>  		[CLKID_CPU_CLK_TRACE_DIV]	= &g12a_cpu_clk_trace_div.hw,
>  		[CLKID_CPU_CLK_TRACE]		= &g12a_cpu_clk_trace.hw,
> +		[CLKID_PCIE_PLL_DCO]		= &g12a_pcie_pll_dco.hw,
> +		[CLKID_PCIE_PLL_DCO_DIV2]	= &g12a_pcie_pll_dco_div2.hw,
> +		[CLKID_PCIE_PLL_OD]		= &g12a_pcie_pll_od.hw,
> +		[CLKID_PCIE_PLL]		= &g12a_pcie_pll.hw,
>  		[NR_CLKS]			= NULL,
>  	},
>  	.num = NR_CLKS,
> @@ -2685,6 +2801,8 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
>  	&g12a_cpu_clk_axi,
>  	&g12a_cpu_clk_trace_div,
>  	&g12a_cpu_clk_trace,
> +	&g12a_pcie_pll_od,
> +	&g12a_pcie_pll_dco,
>  };
>  
>  static const struct meson_eeclkc_data g12a_clkc_data = {
> diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
> index 70aa469ca1cf..1393a09730a6 100644
> --- a/drivers/clk/meson/g12a.h
> +++ b/drivers/clk/meson/g12a.h
> @@ -186,8 +186,11 @@
>  #define CLKID_CPU_CLK_AXI			195
>  #define CLKID_CPU_CLK_TRACE_DIV			196
>  #define CLKID_CPU_CLK_TRACE			197
> +#define CLKID_PCIE_PLL_DCO			198
> +#define CLKID_PCIE_PLL_DCO_DIV2			199
> +#define CLKID_PCIE_PLL_OD			200
>  
> -#define NR_CLKS					198
> +#define NR_CLKS					202
>  
>  /* include the CLKIDs that have been made part of the DT binding */
>  #include <dt-bindings/clock/g12a-clkc.h>
Neil Armstrong March 19, 2019, 9:58 a.m. UTC | #2
On 19/03/2019 10:55, Jerome Brunet wrote:
> On Thu, 2019-03-07 at 15:14 +0100, Neil Armstrong wrote:
>> Add the PCIe reference clock feeding the USB3 + PCIE combo PHY.
>>
>> This PLL needs a very precise register sequence to permit to be locked,
>> thus using the specific clk-pll pcie ops.
>>
>> The PLL is then followed by :
>> - a fixed /2 divider
>> - a 5-bit 1-based divider
>> - a final /2 divider
>>
>> This reference clock is fixed to 100MHz, thus only a single PLL setup
>> is added.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>>  drivers/clk/meson/g12a.c | 118 +++++++++++++++++++++++++++++++++++++++
>>  drivers/clk/meson/g12a.h |   5 +-
>>  2 files changed, 122 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
>> index 80a7172df2a6..d382c21a29e5 100644
>> --- a/drivers/clk/meson/g12a.c
>> +++ b/drivers/clk/meson/g12a.c
>> @@ -614,6 +614,118 @@ static struct clk_regmap g12a_hifi_pll = {
>>  	},
>>  };
>>  
>> +/*
>> + * The Meson G12A PCIE PLL is fined tuned to deliver a very precise
>> + * 100MHz reference clock for the PCIe Analog PHY, and thus requires
>> + * a strict register sequence to enable the PLL.
>> + */
>> +static const struct reg_sequence g12a_pcie_pll_init_regs[] = {
>> +	{ .reg = HHI_PCIE_PLL_CNTL0,	.def = 0x20090496 },
>> +	{ .reg = HHI_PCIE_PLL_CNTL0,	.def = 0x30090496 },
>> +	{ .reg = HHI_PCIE_PLL_CNTL1,	.def = 0x00000000 },
>> +	{ .reg = HHI_PCIE_PLL_CNTL2,	.def = 0x00001100 },
>> +	{ .reg = HHI_PCIE_PLL_CNTL3,	.def = 0x10058e00 },
>> +	{ .reg = HHI_PCIE_PLL_CNTL4,	.def = 0x000100c0 },
>> +	{ .reg = HHI_PCIE_PLL_CNTL5,	.def = 0x68000048 },
>> +	{ .reg = HHI_PCIE_PLL_CNTL5,	.def = 0x68000068, .delay_us = 20 },
>> +	{ .reg = HHI_PCIE_PLL_CNTL4,	.def = 0x008100c0, .delay_us = 10 },
>> +	{ .reg = HHI_PCIE_PLL_CNTL0,	.def = 0x34090496 },
>> +	{ .reg = HHI_PCIE_PLL_CNTL0,	.def = 0x14090496, .delay_us = 10 },
>> +	{ .reg = HHI_PCIE_PLL_CNTL2,	.def = 0x00001000 },
>> +};
>> +
>> +/* Keep a single entry table for recalc/round_rate() ops */
>> +static const struct pll_params_table g12a_pcie_pll_table[] = {
>> +	PLL_PARAMS(150, 1),
>> +	{0, 0},
>> +};
>> +
>> +static struct clk_regmap g12a_pcie_pll_dco = {
>> +	.data = &(struct meson_clk_pll_data){
>> +		.en = {
>> +			.reg_off = HHI_PCIE_PLL_CNTL0,
>> +			.shift   = 28,
>> +			.width   = 1,
>> +		},
>> +		.m = {
>> +			.reg_off = HHI_PCIE_PLL_CNTL0,
>> +			.shift   = 0,
>> +			.width   = 8,
>> +		},
>> +		.n = {
>> +			.reg_off = HHI_PCIE_PLL_CNTL0,
>> +			.shift   = 10,
>> +			.width   = 5,
>> +		},
>> +		.frac = {
>> +			.reg_off = HHI_PCIE_PLL_CNTL1,
>> +			.shift   = 0,
>> +			.width   = 12,
>> +		},
>> +		.l = {
>> +			.reg_off = HHI_PCIE_PLL_CNTL0,
>> +			.shift   = 31,
>> +			.width   = 1,
>> +		},
>> +		.rst = {
>> +			.reg_off = HHI_PCIE_PLL_CNTL0,
>> +			.shift   = 29,
>> +			.width   = 1,
>> +		},
>> +		.table = g12a_pcie_pll_table,
>> +		.init_regs = g12a_pcie_pll_init_regs,
>> +		.init_count = ARRAY_SIZE(g12a_pcie_pll_init_regs),
>> +	},
>> +	.hw.init = &(struct clk_init_data){
>> +		.name = "pcie_pll_dco",
>> +		.ops = &meson_clk_pcie_pll_ops,
>> +		.parent_names = (const char *[]){ IN_PREFIX "xtal" },
>> +		.num_parents = 1,
>> +	},
>> +};
>> +
>> +static struct clk_fixed_factor g12a_pcie_pll_dco_div2 = {
>> +	.mult = 1,
>> +	.div = 2,
>> +	.hw.init = &(struct clk_init_data){
>> +		.name = "pcie_pll_dco_div2",
>> +		.ops = &clk_fixed_factor_ops,
>> +		.parent_names = (const char *[]){ "pcie_pll_dco" },
>> +		.num_parents = 1,
>> +		.flags = CLK_SET_RATE_PARENT,
>> +	},
>> +};
>> +
>> +static struct clk_regmap g12a_pcie_pll_od = {
>> +	.data = &(struct clk_regmap_div_data){
>> +		.offset = HHI_PCIE_PLL_CNTL0,
>> +		.shift = 16,
>> +		.width = 5,
>> +		.flags = CLK_DIVIDER_ROUND_CLOSEST |
>> +			 CLK_DIVIDER_ONE_BASED |
>> +			 CLK_DIVIDER_ALLOW_ZERO,
> 
> That's unusual !
> Ods have always been power of two divider so far. I suppose you have noticed
> and checked this as well ?
>

Yes, I've checked and validated it. Without CLK_DIVIDER_ONE_BASED,
the divider is off by 1. And CLK_DIVIDER_ALLOW_ZERO since at reset,
0 is the default register value.

> That being said, the doc seems to imply that the global post divider will
> divide by 36, which seems difficult to reach with powers of two.
> 
>> +	},
>> +	.hw.init = &(struct clk_init_data){
>> +		.name = "pcie_pll_od",
>> +		.ops = &clk_regmap_divider_ops,
>> +		.parent_names = (const char *[]){ "pcie_pll_dco_div2" },
>> +		.num_parents = 1,
>> +		.flags = CLK_SET_RATE_PARENT,
>> +	},
>> +};
>> +
>> +static struct clk_fixed_factor g12a_pcie_pll = {
>> +	.mult = 1,
>> +	.div = 2,
>> +	.hw.init = &(struct clk_init_data){
>> +		.name = "pcie_pll_pll",
>> +		.ops = &clk_fixed_factor_ops,
>> +		.parent_names = (const char *[]){ "pcie_pll_od" },
>> +		.num_parents = 1,
>> +		.flags = CLK_SET_RATE_PARENT,
>> +	},
>> +};
>> +
>>  static struct clk_regmap g12a_hdmi_pll_dco = {
>>  	.data = &(struct meson_clk_pll_data){
>>  		.en = {
>> @@ -2499,6 +2611,10 @@ static struct clk_hw_onecell_data g12a_hw_onecell_data = {
>>  		[CLKID_CPU_CLK_AXI]		= &g12a_cpu_clk_axi.hw,
>>  		[CLKID_CPU_CLK_TRACE_DIV]	= &g12a_cpu_clk_trace_div.hw,
>>  		[CLKID_CPU_CLK_TRACE]		= &g12a_cpu_clk_trace.hw,
>> +		[CLKID_PCIE_PLL_DCO]		= &g12a_pcie_pll_dco.hw,
>> +		[CLKID_PCIE_PLL_DCO_DIV2]	= &g12a_pcie_pll_dco_div2.hw,
>> +		[CLKID_PCIE_PLL_OD]		= &g12a_pcie_pll_od.hw,
>> +		[CLKID_PCIE_PLL]		= &g12a_pcie_pll.hw,
>>  		[NR_CLKS]			= NULL,
>>  	},
>>  	.num = NR_CLKS,
>> @@ -2685,6 +2801,8 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
>>  	&g12a_cpu_clk_axi,
>>  	&g12a_cpu_clk_trace_div,
>>  	&g12a_cpu_clk_trace,
>> +	&g12a_pcie_pll_od,
>> +	&g12a_pcie_pll_dco,
>>  };
>>  
>>  static const struct meson_eeclkc_data g12a_clkc_data = {
>> diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
>> index 70aa469ca1cf..1393a09730a6 100644
>> --- a/drivers/clk/meson/g12a.h
>> +++ b/drivers/clk/meson/g12a.h
>> @@ -186,8 +186,11 @@
>>  #define CLKID_CPU_CLK_AXI			195
>>  #define CLKID_CPU_CLK_TRACE_DIV			196
>>  #define CLKID_CPU_CLK_TRACE			197
>> +#define CLKID_PCIE_PLL_DCO			198
>> +#define CLKID_PCIE_PLL_DCO_DIV2			199
>> +#define CLKID_PCIE_PLL_OD			200
>>  
>> -#define NR_CLKS					198
>> +#define NR_CLKS					202
>>  
>>  /* include the CLKIDs that have been made part of the DT binding */
>>  #include <dt-bindings/clock/g12a-clkc.h>
> 
>
diff mbox series

Patch

diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 80a7172df2a6..d382c21a29e5 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -614,6 +614,118 @@  static struct clk_regmap g12a_hifi_pll = {
 	},
 };
 
+/*
+ * The Meson G12A PCIE PLL is fined tuned to deliver a very precise
+ * 100MHz reference clock for the PCIe Analog PHY, and thus requires
+ * a strict register sequence to enable the PLL.
+ */
+static const struct reg_sequence g12a_pcie_pll_init_regs[] = {
+	{ .reg = HHI_PCIE_PLL_CNTL0,	.def = 0x20090496 },
+	{ .reg = HHI_PCIE_PLL_CNTL0,	.def = 0x30090496 },
+	{ .reg = HHI_PCIE_PLL_CNTL1,	.def = 0x00000000 },
+	{ .reg = HHI_PCIE_PLL_CNTL2,	.def = 0x00001100 },
+	{ .reg = HHI_PCIE_PLL_CNTL3,	.def = 0x10058e00 },
+	{ .reg = HHI_PCIE_PLL_CNTL4,	.def = 0x000100c0 },
+	{ .reg = HHI_PCIE_PLL_CNTL5,	.def = 0x68000048 },
+	{ .reg = HHI_PCIE_PLL_CNTL5,	.def = 0x68000068, .delay_us = 20 },
+	{ .reg = HHI_PCIE_PLL_CNTL4,	.def = 0x008100c0, .delay_us = 10 },
+	{ .reg = HHI_PCIE_PLL_CNTL0,	.def = 0x34090496 },
+	{ .reg = HHI_PCIE_PLL_CNTL0,	.def = 0x14090496, .delay_us = 10 },
+	{ .reg = HHI_PCIE_PLL_CNTL2,	.def = 0x00001000 },
+};
+
+/* Keep a single entry table for recalc/round_rate() ops */
+static const struct pll_params_table g12a_pcie_pll_table[] = {
+	PLL_PARAMS(150, 1),
+	{0, 0},
+};
+
+static struct clk_regmap g12a_pcie_pll_dco = {
+	.data = &(struct meson_clk_pll_data){
+		.en = {
+			.reg_off = HHI_PCIE_PLL_CNTL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.m = {
+			.reg_off = HHI_PCIE_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_PCIE_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.frac = {
+			.reg_off = HHI_PCIE_PLL_CNTL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.l = {
+			.reg_off = HHI_PCIE_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_PCIE_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.table = g12a_pcie_pll_table,
+		.init_regs = g12a_pcie_pll_init_regs,
+		.init_count = ARRAY_SIZE(g12a_pcie_pll_init_regs),
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pcie_pll_dco",
+		.ops = &meson_clk_pcie_pll_ops,
+		.parent_names = (const char *[]){ IN_PREFIX "xtal" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_pcie_pll_dco_div2 = {
+	.mult = 1,
+	.div = 2,
+	.hw.init = &(struct clk_init_data){
+		.name = "pcie_pll_dco_div2",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "pcie_pll_dco" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_pcie_pll_od = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_PCIE_PLL_CNTL0,
+		.shift = 16,
+		.width = 5,
+		.flags = CLK_DIVIDER_ROUND_CLOSEST |
+			 CLK_DIVIDER_ONE_BASED |
+			 CLK_DIVIDER_ALLOW_ZERO,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pcie_pll_od",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "pcie_pll_dco_div2" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_fixed_factor g12a_pcie_pll = {
+	.mult = 1,
+	.div = 2,
+	.hw.init = &(struct clk_init_data){
+		.name = "pcie_pll_pll",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "pcie_pll_od" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
 static struct clk_regmap g12a_hdmi_pll_dco = {
 	.data = &(struct meson_clk_pll_data){
 		.en = {
@@ -2499,6 +2611,10 @@  static struct clk_hw_onecell_data g12a_hw_onecell_data = {
 		[CLKID_CPU_CLK_AXI]		= &g12a_cpu_clk_axi.hw,
 		[CLKID_CPU_CLK_TRACE_DIV]	= &g12a_cpu_clk_trace_div.hw,
 		[CLKID_CPU_CLK_TRACE]		= &g12a_cpu_clk_trace.hw,
+		[CLKID_PCIE_PLL_DCO]		= &g12a_pcie_pll_dco.hw,
+		[CLKID_PCIE_PLL_DCO_DIV2]	= &g12a_pcie_pll_dco_div2.hw,
+		[CLKID_PCIE_PLL_OD]		= &g12a_pcie_pll_od.hw,
+		[CLKID_PCIE_PLL]		= &g12a_pcie_pll.hw,
 		[NR_CLKS]			= NULL,
 	},
 	.num = NR_CLKS,
@@ -2685,6 +2801,8 @@  static struct clk_regmap *const g12a_clk_regmaps[] = {
 	&g12a_cpu_clk_axi,
 	&g12a_cpu_clk_trace_div,
 	&g12a_cpu_clk_trace,
+	&g12a_pcie_pll_od,
+	&g12a_pcie_pll_dco,
 };
 
 static const struct meson_eeclkc_data g12a_clkc_data = {
diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
index 70aa469ca1cf..1393a09730a6 100644
--- a/drivers/clk/meson/g12a.h
+++ b/drivers/clk/meson/g12a.h
@@ -186,8 +186,11 @@ 
 #define CLKID_CPU_CLK_AXI			195
 #define CLKID_CPU_CLK_TRACE_DIV			196
 #define CLKID_CPU_CLK_TRACE			197
+#define CLKID_PCIE_PLL_DCO			198
+#define CLKID_PCIE_PLL_DCO_DIV2			199
+#define CLKID_PCIE_PLL_OD			200
 
-#define NR_CLKS					198
+#define NR_CLKS					202
 
 /* include the CLKIDs that have been made part of the DT binding */
 #include <dt-bindings/clock/g12a-clkc.h>