| Message ID | 20190307151342.7381-5-narmstrong@baylibre.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: g12a: Add peripherals | expand |
On 07/03/2019 16:13, Neil Armstrong wrote: > From: Jerome Brunet <jbrunet@baylibre.com> > > Add the always on UART pinctrl setting to the g12a soc DT and > use it for the u200 reference design > > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> > --- > .../arm64/boot/dts/amlogic/meson-g12a-u200.dts | 2 ++ > arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 18 ++++++++++++++++++ > 2 files changed, 20 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts > index c44dbdddf2cf..f2afd0bf3e28 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts > @@ -25,5 +25,7 @@ > > &uart_AO { > status = "okay"; > + pinctrl-0 = <&uart_ao_a_pins>; > + pinctrl-names = "default"; > }; > > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi > index c141cc7f6b09..f8f055c49f9a 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi > @@ -177,6 +177,24 @@ > #gpio-cells = <2>; > gpio-ranges = <&ao_pinctrl 0 0 15>; > }; > + > + uart_ao_a_pins: uart_a_ao { > + mux { > + groups = "uart_ao_a_tx", > + "uart_ao_a_rx"; > + function = "uart_ao_a"; > + bias-disable; > + }; > + }; > + > + uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts { > + mux { > + groups = "uart_ao_a_cts", > + "uart_ao_a_rts"; > + function = "uart_ao_a"; > + bias-disable; > + }; > + }; > }; > }; > > Will move this out of this patchset to the boards patchset
Neil Armstrong <narmstrong@baylibre.com> writes: > On 07/03/2019 16:13, Neil Armstrong wrote: >> From: Jerome Brunet <jbrunet@baylibre.com> >> >> Add the always on UART pinctrl setting to the g12a soc DT and >> use it for the u200 reference design >> >> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> >> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> >> --- >> .../arm64/boot/dts/amlogic/meson-g12a-u200.dts | 2 ++ >> arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 18 ++++++++++++++++++ >> 2 files changed, 20 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts >> index c44dbdddf2cf..f2afd0bf3e28 100644 >> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts >> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts >> @@ -25,5 +25,7 @@ >> >> &uart_AO { >> status = "okay"; >> + pinctrl-0 = <&uart_ao_a_pins>; >> + pinctrl-names = "default"; >> }; >> >> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi >> index c141cc7f6b09..f8f055c49f9a 100644 >> --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi >> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi >> @@ -177,6 +177,24 @@ >> #gpio-cells = <2>; >> gpio-ranges = <&ao_pinctrl 0 0 15>; >> }; >> + >> + uart_ao_a_pins: uart_a_ao { >> + mux { >> + groups = "uart_ao_a_tx", >> + "uart_ao_a_rx"; >> + function = "uart_ao_a"; >> + bias-disable; >> + }; >> + }; >> + >> + uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts { >> + mux { >> + groups = "uart_ao_a_cts", >> + "uart_ao_a_rts"; >> + function = "uart_ao_a"; >> + bias-disable; >> + }; >> + }; >> }; >> }; >> >> > > Will move this out of this patchset to the boards patchset I assume you meant you'd move the first hunk, the one that modifies the u200 board to the other series, but keep this hunk in this series? Kevin
On 12/03/2019 22:15, Kevin Hilman wrote: > Neil Armstrong <narmstrong@baylibre.com> writes: > >> On 07/03/2019 16:13, Neil Armstrong wrote: >>> From: Jerome Brunet <jbrunet@baylibre.com> >>> >>> Add the always on UART pinctrl setting to the g12a soc DT and >>> use it for the u200 reference design >>> >>> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> >>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> >>> --- >>> .../arm64/boot/dts/amlogic/meson-g12a-u200.dts | 2 ++ >>> arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 18 ++++++++++++++++++ >>> 2 files changed, 20 insertions(+) >>> >>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts >>> index c44dbdddf2cf..f2afd0bf3e28 100644 >>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts >>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts >>> @@ -25,5 +25,7 @@ >>> >>> &uart_AO { >>> status = "okay"; >>> + pinctrl-0 = <&uart_ao_a_pins>; >>> + pinctrl-names = "default"; >>> }; >>> >>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi >>> index c141cc7f6b09..f8f055c49f9a 100644 >>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi >>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi >>> @@ -177,6 +177,24 @@ >>> #gpio-cells = <2>; >>> gpio-ranges = <&ao_pinctrl 0 0 15>; >>> }; >>> + >>> + uart_ao_a_pins: uart_a_ao { >>> + mux { >>> + groups = "uart_ao_a_tx", >>> + "uart_ao_a_rx"; >>> + function = "uart_ao_a"; >>> + bias-disable; >>> + }; >>> + }; >>> + >>> + uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts { >>> + mux { >>> + groups = "uart_ao_a_cts", >>> + "uart_ao_a_rts"; >>> + function = "uart_ao_a"; >>> + bias-disable; >>> + }; >>> + }; >>> }; >>> }; >>> >>> >> >> Will move this out of this patchset to the boards patchset > > I assume you meant you'd move the first hunk, the one that modifies the > u200 board to the other series, but keep this hunk in this series? Yep I will remove the board chunk in the v2 of this patchset. Neil > > Kevin >
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts index c44dbdddf2cf..f2afd0bf3e28 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts @@ -25,5 +25,7 @@ &uart_AO { status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index c141cc7f6b09..f8f055c49f9a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -177,6 +177,24 @@ #gpio-cells = <2>; gpio-ranges = <&ao_pinctrl 0 0 15>; }; + + uart_ao_a_pins: uart_a_ao { + mux { + groups = "uart_ao_a_tx", + "uart_ao_a_rx"; + function = "uart_ao_a"; + bias-disable; + }; + }; + + uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts { + mux { + groups = "uart_ao_a_cts", + "uart_ao_a_rts"; + function = "uart_ao_a"; + bias-disable; + }; + }; }; };