diff mbox series

[v3,2/8] dt-bindings: phy: Add Amlogic G12A USB3+PCIE Combo PHY Bindings

Message ID 20190318101153.7531-3-narmstrong@baylibre.com (mailing list archive)
State Superseded
Headers show
Series arm64: meson: Add support for USB on Amlogic G12A | expand

Commit Message

Neil Armstrong March 18, 2019, 10:11 a.m. UTC
Add the Amlogic G12A Family USB3 + PCIE Combo PHY Bindings.

This PHY can provide exclusively USB3 or PCIE support on shared I/Os.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/phy/meson-g12a-usb3-pcie-phy.txt | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
new file mode 100644
index 000000000000..7cfc17e2df31
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
@@ -0,0 +1,22 @@ 
+* Amlogic G12A USB3 + PCIE Combo PHY binding
+
+Required properties:
+- compatible:	Should be "amlogic,meson-g12a-usb3-pcie-phy"
+- #phys-cells:	must be 1. The cell number is used to select the phy mode
+  as defined in <dt-bindings/phy/phy.h> between PHY_TYPE_USB3 and PHY_TYPE_PCIE
+- reg:		The base address and length of the registers
+- clocks:	a phandle to the 100MHz reference clock of this PHY
+- clock-names:	must be "ref_clk"
+- resets:	phandle to the reset lines for the PHY control
+- reset-names:	must be "phy"
+
+Example:
+	usb3_pcie_phy: phy@46000 {
+		compatible = "amlogic,g12a-usb3-pcie-phy";
+		reg = <0x0 0x46000 0x0 0x2000>;
+		clocks = <&clkc CLKID_PCIE_PLL>;
+		clock-names = "ref_clk";
+		resets = <&reset RESET_PCIE_PHY>;
+		reset-names = "phy";
+		#phy-cells = <1>;
+	};