@@ -24,6 +24,7 @@
#define CTRL0_TODDR_MSB_POS(x) ((x) << 8)
#define CTRL0_TODDR_LSB_POS_MASK GENMASK(7, 3)
#define CTRL0_TODDR_LSB_POS(x) ((x) << 3)
+#define CTRL1_TODDR_FORCE_FINISH BIT(25)
#define TODDR_MSB_POS 31
@@ -33,6 +34,22 @@ static int axg_toddr_pcm_new(struct snd_soc_pcm_runtime *rtd,
return axg_fifo_pcm_new(rtd, SNDRV_PCM_STREAM_CAPTURE);
}
+static int g12a_toddr_dai_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai);
+
+ /* Reset the write pointer to the FIFO_INIT_ADDR */
+ regmap_update_bits(fifo->map, FIFO_CTRL1,
+ CTRL1_TODDR_FORCE_FINISH, 0);
+ regmap_update_bits(fifo->map, FIFO_CTRL1,
+ CTRL1_TODDR_FORCE_FINISH, CTRL1_TODDR_FORCE_FINISH);
+ regmap_update_bits(fifo->map, FIFO_CTRL1,
+ CTRL1_TODDR_FORCE_FINISH, 0);
+
+ return 0;
+}
+
static int axg_toddr_dai_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
@@ -172,10 +189,46 @@ static const struct axg_fifo_match_data axg_toddr_match_data = {
.dai_drv = &axg_toddr_dai_drv
};
+static const struct snd_soc_dai_ops g12a_toddr_ops = {
+ .prepare = g12a_toddr_dai_prepare,
+ .hw_params = axg_toddr_dai_hw_params,
+ .startup = axg_toddr_dai_startup,
+ .shutdown = axg_toddr_dai_shutdown,
+};
+
+static struct snd_soc_dai_driver g12a_toddr_dai_drv = {
+ .name = "TODDR",
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = AXG_FIFO_CH_MAX,
+ .rates = AXG_FIFO_RATES,
+ .formats = AXG_FIFO_FORMATS,
+ },
+ .ops = &g12a_toddr_ops,
+ .pcm_new = axg_toddr_pcm_new,
+};
+
+static const struct snd_soc_component_driver g12a_toddr_component_drv = {
+ .dapm_widgets = axg_toddr_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(axg_toddr_dapm_widgets),
+ .dapm_routes = axg_toddr_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(axg_toddr_dapm_routes),
+ .ops = &g12a_fifo_pcm_ops
+};
+
+static const struct axg_fifo_match_data g12a_toddr_match_data = {
+ .component_drv = &g12a_toddr_component_drv,
+ .dai_drv = &g12a_toddr_dai_drv
+};
+
static const struct of_device_id axg_toddr_of_match[] = {
{
.compatible = "amlogic,axg-toddr",
.data = &axg_toddr_match_data,
+ }, {
+ .compatible = "amlogic,g12a-toddr",
+ .data = &g12a_toddr_match_data,
}, {}
};
MODULE_DEVICE_TABLE(of, axg_toddr_of_match);
Since the g12a SoC fifo can set the fifo initial start address, we must make sure to actually reset the write pointer to this address when starting a capture. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- sound/soc/meson/axg-toddr.c | 53 +++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+)