diff mbox series

[v2,5/5] arm64: dts: meson: sei510: add network support

Message ID 20190520131401.11804-6-jbrunet@baylibre.com (mailing list archive)
State Mainlined
Commit a1abafb6ccbcf99865b0e1e150e7ebe7d8ec22e8
Headers show
Series arm64: dts: meson: g12a: add ethernet support | expand

Commit Message

Jerome Brunet May 20, 2019, 1:14 p.m. UTC 
Enable the network interface of the SEI510 which use the internal PHY.

Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Martin Blumenstingl May 20, 2019, 5:38 p.m. UTC | #1 
On Mon, May 20, 2019 at 3:14 PM Jerome Brunet <jbrunet@baylibre.com> wrote:
>
> Enable the network interface of the SEI510 which use the internal PHY.
>
> Tested-by: Kevin Hilman <khilman@baylibre.com>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
I don't have this board but it looks sane so:
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 484b93ef11d8..be1d9ed6d521 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -29,6 +29,7 @@ 
 
 	aliases {
 		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
 	};
 
 	chosen {
@@ -149,6 +150,12 @@ 
 	};
 };
 
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
 &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;