Message ID | 20190520133753.23871-4-narmstrong@baylibre.com (mailing list archive) |
---|---|
State | Not Applicable |
Delegated to: | Neil Armstrong |
Headers | show |
Series | drm/meson: Add support for HDMI2.0 YUV420 4k60 | expand |
Hi! Dne ponedeljek, 20. maj 2019 ob 15:37:51 CEST je Neil Armstrong napisal(a): > In order to support the HDMI2.0 YUV420, YUV422 and the 10bit, 12bit and > 16bits outpu use cases, add support for the recently introduced bridge > callback format_set(). > > This callback will setup the new input format and encoding from encoder, > then these information will be used instead of the default ones > in the dw_hdmi_setup() function. > > To determine the output bus format, has been added : > - support for the connector display_info bus_formats, where a fixed > output bus format can be enforced by the encoder > - support for synami output bus format depending on the input format, > especially the YUV420 input bus format, enforcing YUV420 as output > with the correct bit depth > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> > --- > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 121 ++++++++++++++++++++-- > 1 file changed, 112 insertions(+), 9 deletions(-) > > diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index > b50c49caf7ae..284ce59be8f8 100644 > --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > @@ -103,6 +103,8 @@ struct hdmi_vmode { > }; > > struct hdmi_data_info { > + unsigned int bridge_in_bus_format; > + unsigned int bridge_in_encoding; > unsigned int enc_in_bus_format; > unsigned int enc_out_bus_format; > unsigned int enc_in_encoding; > @@ -1838,8 +1840,51 @@ static void hdmi_disable_overflow_interrupts(struct > dw_hdmi *hdmi) HDMI_IH_MUTE_FC_STAT2); > } > > +/* > + * The DW-HDMI CSC can only interpolate and decimate from 4:2:2 to > 4:4:4/RGB + * and from 4:4:4/RGB to 4:2:2. > + * Default to RGB output except if 4:2:0 as input, which CSC cannot > convert. + */ > +static unsigned long dw_hdmi_determine_output_bus_format(struct dw_hdmi > *hdmi) +{ > + unsigned int depth = hdmi_bus_fmt_color_depth( > + hdmi- >hdmi_data.enc_in_bus_format); > + bool is_420 = hdmi_bus_fmt_is_yuv420(hdmi- >hdmi_data.enc_in_bus_format); > + unsigned long fmt = MEDIA_BUS_FMT_RGB888_1X24; > + > + switch (depth) { > + case 8: > + if (is_420) > + fmt = MEDIA_BUS_FMT_UYYVYY8_0_5X24; > + else > + fmt = MEDIA_BUS_FMT_RGB888_1X24; > + break; > + case 10: > + if (is_420) > + fmt = MEDIA_BUS_FMT_UYYVYY10_0_5X30; > + else > + fmt = MEDIA_BUS_FMT_RGB101010_1X30; > + break; > + case 12: > + if (is_420) > + fmt = MEDIA_BUS_FMT_UYYVYY12_0_5X36; > + else > + fmt = MEDIA_BUS_FMT_RGB121212_1X36; > + break; > + case 16: > + if (is_420) > + fmt = MEDIA_BUS_FMT_UYYVYY16_0_5X48; > + else > + fmt = MEDIA_BUS_FMT_RGB161616_1X48; > + break; > + } > + > + return fmt; > +} > + > static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode > *mode) { > + struct drm_display_info *display = &hdmi->connector.display_info; > int ret; > > hdmi_disable_overflow_interrupts(hdmi); > @@ -1853,9 +1898,9 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct > drm_display_mode *mode) } > > if ((hdmi->vic == 6) || (hdmi->vic == 7) || > - (hdmi->vic == 21) || (hdmi->vic == 22) || > - (hdmi->vic == 2) || (hdmi->vic == 3) || > - (hdmi->vic == 17) || (hdmi->vic == 18)) > + (hdmi->vic == 21) || (hdmi->vic == 22) || > + (hdmi->vic == 2) || (hdmi->vic == 3) || > + (hdmi->vic == 17) || (hdmi->vic == 18)) > hdmi->hdmi_data.enc_out_encoding = V4L2_YCBCR_ENC_601; > else > hdmi->hdmi_data.enc_out_encoding = V4L2_YCBCR_ENC_709; > @@ -1863,22 +1908,29 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, > struct drm_display_mode *mode) > hdmi->hdmi_data.video_mode.mpixelrepetitionoutput = 0; > hdmi->hdmi_data.video_mode.mpixelrepetitioninput = 0; > > - /* TOFIX: Get input format from plat data or fallback to RGB888 */ > - if (hdmi->plat_data->input_bus_format) > + if (hdmi->hdmi_data.bridge_in_bus_format) > + hdmi->hdmi_data.enc_in_bus_format = > + hdmi->hdmi_data.bridge_in_bus_format; > + else if (hdmi->plat_data->input_bus_format) > hdmi->hdmi_data.enc_in_bus_format = > hdmi->plat_data->input_bus_format; > else > hdmi->hdmi_data.enc_in_bus_format = MEDIA_BUS_FMT_RGB888_1X24; > > - /* TOFIX: Get input encoding from plat data or fallback to none */ > - if (hdmi->plat_data->input_bus_encoding) > + if (hdmi->hdmi_data.bridge_in_encoding) > + hdmi->hdmi_data.enc_in_encoding = > + hdmi->hdmi_data.bridge_in_encoding; > + else if (hdmi->plat_data->input_bus_encoding) > hdmi->hdmi_data.enc_in_encoding = > hdmi->plat_data->input_bus_encoding; > else > hdmi->hdmi_data.enc_in_encoding = V4L2_YCBCR_ENC_DEFAULT; > > - /* TOFIX: Default to RGB888 output format */ > - hdmi->hdmi_data.enc_out_bus_format = MEDIA_BUS_FMT_RGB888_1X24; > + if (display->num_bus_formats) > + hdmi->hdmi_data.enc_out_bus_format = display- >bus_formats[0]; > + else > + hdmi->hdmi_data.enc_out_bus_format = > + dw_hdmi_determine_output_bus_format(hdmi); > > hdmi->hdmi_data.pix_repet_factor = 0; > hdmi->hdmi_data.hdcp_enable = 0; > @@ -2150,6 +2202,56 @@ dw_hdmi_bridge_mode_valid(struct drm_bridge *bridge, > return mode_status; > } > > +static bool dw_hdmi_drm_bridge_format_set(struct drm_bridge *bridge, > + const u32 input_bus_format, > + const u32 input_encoding) > +{ > + struct dw_hdmi *hdmi = bridge->driver_private; > + > + /* Filter supported input bus formats */ > + switch (input_bus_format) { > + case MEDIA_BUS_FMT_RGB888_1X24: > + case MEDIA_BUS_FMT_RGB101010_1X30: > + case MEDIA_BUS_FMT_RGB121212_1X36: > + case MEDIA_BUS_FMT_RGB161616_1X48: > + case MEDIA_BUS_FMT_YUV8_1X24: > + case MEDIA_BUS_FMT_YUV10_1X30: > + case MEDIA_BUS_FMT_YUV12_1X36: > + case MEDIA_BUS_FMT_YUV16_1X48: > + case MEDIA_BUS_FMT_UYVY8_1X16: > + case MEDIA_BUS_FMT_UYVY10_1X20: > + case MEDIA_BUS_FMT_UYVY12_1X24: > + case MEDIA_BUS_FMT_UYYVYY8_0_5X24: > + case MEDIA_BUS_FMT_UYYVYY10_0_5X30: > + case MEDIA_BUS_FMT_UYYVYY12_0_5X36: > + case MEDIA_BUS_FMT_UYYVYY16_0_5X48: > + break; > + default: > + dev_dbg(hdmi->dev, "Unsupported Input bus format %x\n", > + input_bus_format); > + return false; > + } > + > + /* Filter supported input bus encoding */ > + switch (input_encoding) { > + case V4L2_YCBCR_ENC_DEFAULT: > + case V4L2_YCBCR_ENC_601: > + case V4L2_YCBCR_ENC_709: > + case V4L2_YCBCR_ENC_XV601: > + case V4L2_YCBCR_ENC_XV709: > + break; > + default: > + dev_dbg(hdmi->dev, "Unsupported Input encoding %x\n", > + input_bus_format); > + return false; > + } > + > + hdmi->hdmi_data.bridge_in_bus_format = input_bus_format; > + hdmi->hdmi_data.bridge_in_encoding = input_encoding; > + > + return true; > +} > + > static void dw_hdmi_bridge_mode_set(struct drm_bridge *bridge, > const struct drm_display_mode *orig_mode, > const struct drm_display_mode *mode) > @@ -2192,6 +2294,7 @@ static const struct drm_bridge_funcs > dw_hdmi_bridge_funcs = { .disable = dw_hdmi_bridge_disable, > .mode_set = dw_hdmi_bridge_mode_set, > .mode_valid = dw_hdmi_bridge_mode_valid, > + .format_set = dw_hdmi_drm_bridge_format_set, > }; > > static irqreturn_t dw_hdmi_i2c_irq(struct dw_hdmi *hdmi) Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Best regards, Jernej
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index b50c49caf7ae..284ce59be8f8 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c @@ -103,6 +103,8 @@ struct hdmi_vmode { }; struct hdmi_data_info { + unsigned int bridge_in_bus_format; + unsigned int bridge_in_encoding; unsigned int enc_in_bus_format; unsigned int enc_out_bus_format; unsigned int enc_in_encoding; @@ -1838,8 +1840,51 @@ static void hdmi_disable_overflow_interrupts(struct dw_hdmi *hdmi) HDMI_IH_MUTE_FC_STAT2); } +/* + * The DW-HDMI CSC can only interpolate and decimate from 4:2:2 to 4:4:4/RGB + * and from 4:4:4/RGB to 4:2:2. + * Default to RGB output except if 4:2:0 as input, which CSC cannot convert. + */ +static unsigned long dw_hdmi_determine_output_bus_format(struct dw_hdmi *hdmi) +{ + unsigned int depth = hdmi_bus_fmt_color_depth( + hdmi->hdmi_data.enc_in_bus_format); + bool is_420 = hdmi_bus_fmt_is_yuv420(hdmi->hdmi_data.enc_in_bus_format); + unsigned long fmt = MEDIA_BUS_FMT_RGB888_1X24; + + switch (depth) { + case 8: + if (is_420) + fmt = MEDIA_BUS_FMT_UYYVYY8_0_5X24; + else + fmt = MEDIA_BUS_FMT_RGB888_1X24; + break; + case 10: + if (is_420) + fmt = MEDIA_BUS_FMT_UYYVYY10_0_5X30; + else + fmt = MEDIA_BUS_FMT_RGB101010_1X30; + break; + case 12: + if (is_420) + fmt = MEDIA_BUS_FMT_UYYVYY12_0_5X36; + else + fmt = MEDIA_BUS_FMT_RGB121212_1X36; + break; + case 16: + if (is_420) + fmt = MEDIA_BUS_FMT_UYYVYY16_0_5X48; + else + fmt = MEDIA_BUS_FMT_RGB161616_1X48; + break; + } + + return fmt; +} + static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode) { + struct drm_display_info *display = &hdmi->connector.display_info; int ret; hdmi_disable_overflow_interrupts(hdmi); @@ -1853,9 +1898,9 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode) } if ((hdmi->vic == 6) || (hdmi->vic == 7) || - (hdmi->vic == 21) || (hdmi->vic == 22) || - (hdmi->vic == 2) || (hdmi->vic == 3) || - (hdmi->vic == 17) || (hdmi->vic == 18)) + (hdmi->vic == 21) || (hdmi->vic == 22) || + (hdmi->vic == 2) || (hdmi->vic == 3) || + (hdmi->vic == 17) || (hdmi->vic == 18)) hdmi->hdmi_data.enc_out_encoding = V4L2_YCBCR_ENC_601; else hdmi->hdmi_data.enc_out_encoding = V4L2_YCBCR_ENC_709; @@ -1863,22 +1908,29 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode) hdmi->hdmi_data.video_mode.mpixelrepetitionoutput = 0; hdmi->hdmi_data.video_mode.mpixelrepetitioninput = 0; - /* TOFIX: Get input format from plat data or fallback to RGB888 */ - if (hdmi->plat_data->input_bus_format) + if (hdmi->hdmi_data.bridge_in_bus_format) + hdmi->hdmi_data.enc_in_bus_format = + hdmi->hdmi_data.bridge_in_bus_format; + else if (hdmi->plat_data->input_bus_format) hdmi->hdmi_data.enc_in_bus_format = hdmi->plat_data->input_bus_format; else hdmi->hdmi_data.enc_in_bus_format = MEDIA_BUS_FMT_RGB888_1X24; - /* TOFIX: Get input encoding from plat data or fallback to none */ - if (hdmi->plat_data->input_bus_encoding) + if (hdmi->hdmi_data.bridge_in_encoding) + hdmi->hdmi_data.enc_in_encoding = + hdmi->hdmi_data.bridge_in_encoding; + else if (hdmi->plat_data->input_bus_encoding) hdmi->hdmi_data.enc_in_encoding = hdmi->plat_data->input_bus_encoding; else hdmi->hdmi_data.enc_in_encoding = V4L2_YCBCR_ENC_DEFAULT; - /* TOFIX: Default to RGB888 output format */ - hdmi->hdmi_data.enc_out_bus_format = MEDIA_BUS_FMT_RGB888_1X24; + if (display->num_bus_formats) + hdmi->hdmi_data.enc_out_bus_format = display->bus_formats[0]; + else + hdmi->hdmi_data.enc_out_bus_format = + dw_hdmi_determine_output_bus_format(hdmi); hdmi->hdmi_data.pix_repet_factor = 0; hdmi->hdmi_data.hdcp_enable = 0; @@ -2150,6 +2202,56 @@ dw_hdmi_bridge_mode_valid(struct drm_bridge *bridge, return mode_status; } +static bool dw_hdmi_drm_bridge_format_set(struct drm_bridge *bridge, + const u32 input_bus_format, + const u32 input_encoding) +{ + struct dw_hdmi *hdmi = bridge->driver_private; + + /* Filter supported input bus formats */ + switch (input_bus_format) { + case MEDIA_BUS_FMT_RGB888_1X24: + case MEDIA_BUS_FMT_RGB101010_1X30: + case MEDIA_BUS_FMT_RGB121212_1X36: + case MEDIA_BUS_FMT_RGB161616_1X48: + case MEDIA_BUS_FMT_YUV8_1X24: + case MEDIA_BUS_FMT_YUV10_1X30: + case MEDIA_BUS_FMT_YUV12_1X36: + case MEDIA_BUS_FMT_YUV16_1X48: + case MEDIA_BUS_FMT_UYVY8_1X16: + case MEDIA_BUS_FMT_UYVY10_1X20: + case MEDIA_BUS_FMT_UYVY12_1X24: + case MEDIA_BUS_FMT_UYYVYY8_0_5X24: + case MEDIA_BUS_FMT_UYYVYY10_0_5X30: + case MEDIA_BUS_FMT_UYYVYY12_0_5X36: + case MEDIA_BUS_FMT_UYYVYY16_0_5X48: + break; + default: + dev_dbg(hdmi->dev, "Unsupported Input bus format %x\n", + input_bus_format); + return false; + } + + /* Filter supported input bus encoding */ + switch (input_encoding) { + case V4L2_YCBCR_ENC_DEFAULT: + case V4L2_YCBCR_ENC_601: + case V4L2_YCBCR_ENC_709: + case V4L2_YCBCR_ENC_XV601: + case V4L2_YCBCR_ENC_XV709: + break; + default: + dev_dbg(hdmi->dev, "Unsupported Input encoding %x\n", + input_bus_format); + return false; + } + + hdmi->hdmi_data.bridge_in_bus_format = input_bus_format; + hdmi->hdmi_data.bridge_in_encoding = input_encoding; + + return true; +} + static void dw_hdmi_bridge_mode_set(struct drm_bridge *bridge, const struct drm_display_mode *orig_mode, const struct drm_display_mode *mode) @@ -2192,6 +2294,7 @@ static const struct drm_bridge_funcs dw_hdmi_bridge_funcs = { .disable = dw_hdmi_bridge_disable, .mode_set = dw_hdmi_bridge_mode_set, .mode_valid = dw_hdmi_bridge_mode_valid, + .format_set = dw_hdmi_drm_bridge_format_set, }; static irqreturn_t dw_hdmi_i2c_irq(struct dw_hdmi *hdmi)
In order to support the HDMI2.0 YUV420, YUV422 and the 10bit, 12bit and 16bits outpu use cases, add support for the recently introduced bridge callback format_set(). This callback will setup the new input format and encoding from encoder, then these information will be used instead of the default ones in the dw_hdmi_setup() function. To determine the output bus format, has been added : - support for the connector display_info bus_formats, where a fixed output bus format can be enforced by the encoder - support for synami output bus format depending on the input format, especially the YUV420 input bus format, enforcing YUV420 as output with the correct bit depth Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 121 ++++++++++++++++++++-- 1 file changed, 112 insertions(+), 9 deletions(-)