diff mbox series

[04/14] pwm: meson: change MISC_CLK_SEL_WIDTH to MISC_CLK_SEL_MASK

Message ID 20190525181133.4875-5-martin.blumenstingl@googlemail.com (mailing list archive)
State Superseded
Headers show
Series pwm-meson: cleanups and improvements | expand

Commit Message

Martin Blumenstingl May 25, 2019, 6:11 p.m. UTC
MISC_CLK_SEL_WIDTH is only used in one place where it's converted into
a bit-mask. Rename and change the macro to be a bit-mask so that
conversion is not needed anymore. No functional changes intended.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/pwm/pwm-meson.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Neil Armstrong May 27, 2019, 12:26 p.m. UTC | #1
On 25/05/2019 20:11, Martin Blumenstingl wrote:
> MISC_CLK_SEL_WIDTH is only used in one place where it's converted into
> a bit-mask. Rename and change the macro to be a bit-mask so that
> conversion is not needed anymore. No functional changes intended.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  drivers/pwm/pwm-meson.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
> index c62a3ac924d0..84b28ba0f903 100644
> --- a/drivers/pwm/pwm-meson.c
> +++ b/drivers/pwm/pwm-meson.c
> @@ -33,7 +33,7 @@
>  #define MISC_A_CLK_DIV_SHIFT	8
>  #define MISC_B_CLK_SEL_SHIFT	6
>  #define MISC_A_CLK_SEL_SHIFT	4
> -#define MISC_CLK_SEL_WIDTH	2
> +#define MISC_CLK_SEL_MASK	0x3

NIT I would have used GENMASK here

>  #define MISC_B_EN		BIT(1)
>  #define MISC_A_EN		BIT(0)
>  
> @@ -463,7 +463,7 @@ static int meson_pwm_init_channels(struct meson_pwm *meson,
>  
>  		channel->mux.reg = meson->base + REG_MISC_AB;
>  		channel->mux.shift = mux_reg_shifts[i];
> -		channel->mux.mask = BIT(MISC_CLK_SEL_WIDTH) - 1;
> +		channel->mux.mask = MISC_CLK_SEL_MASK;
>  		channel->mux.flags = 0;
>  		channel->mux.lock = &meson->lock;
>  		channel->mux.table = NULL;
> 

Anyway, it's still correct :

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Martin Blumenstingl May 27, 2019, 5:46 p.m. UTC | #2
Hi Neil,

On Mon, May 27, 2019 at 2:26 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> On 25/05/2019 20:11, Martin Blumenstingl wrote:
> > MISC_CLK_SEL_WIDTH is only used in one place where it's converted into
> > a bit-mask. Rename and change the macro to be a bit-mask so that
> > conversion is not needed anymore. No functional changes intended.
> >
> > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> > ---
> >  drivers/pwm/pwm-meson.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
> > index c62a3ac924d0..84b28ba0f903 100644
> > --- a/drivers/pwm/pwm-meson.c
> > +++ b/drivers/pwm/pwm-meson.c
> > @@ -33,7 +33,7 @@
> >  #define MISC_A_CLK_DIV_SHIFT 8
> >  #define MISC_B_CLK_SEL_SHIFT 6
> >  #define MISC_A_CLK_SEL_SHIFT 4
> > -#define MISC_CLK_SEL_WIDTH   2
> > +#define MISC_CLK_SEL_MASK    0x3
>
> NIT I would have used GENMASK here
that was my initial idea but I decided against it.
the variant I came up with was: #define MISC_CLK_SEL_MASK    GENMASK(1, 0)

however, the actual offset is either 4 or 6 (depending on the PWM channel)
and I felt that duplicating the macro would just make it more complicated
so instead I chose to be consistent with MISC_CLK_DIV_MASK

Let me know if you would like me to change it (then I prefer to update
MISC_CLK_DIV_MASK as well).


Martin
Uwe Kleine-König May 27, 2019, 6 p.m. UTC | #3
On Mon, May 27, 2019 at 07:46:43PM +0200, Martin Blumenstingl wrote:
> Hi Neil,
> 
> On Mon, May 27, 2019 at 2:26 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
> >
> > On 25/05/2019 20:11, Martin Blumenstingl wrote:
> > > MISC_CLK_SEL_WIDTH is only used in one place where it's converted into
> > > a bit-mask. Rename and change the macro to be a bit-mask so that
> > > conversion is not needed anymore. No functional changes intended.
> > >
> > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> > > ---
> > >  drivers/pwm/pwm-meson.c | 4 ++--
> > >  1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
> > > index c62a3ac924d0..84b28ba0f903 100644
> > > --- a/drivers/pwm/pwm-meson.c
> > > +++ b/drivers/pwm/pwm-meson.c
> > > @@ -33,7 +33,7 @@
> > >  #define MISC_A_CLK_DIV_SHIFT 8
> > >  #define MISC_B_CLK_SEL_SHIFT 6
> > >  #define MISC_A_CLK_SEL_SHIFT 4
> > > -#define MISC_CLK_SEL_WIDTH   2
> > > +#define MISC_CLK_SEL_MASK    0x3
> >
> > NIT I would have used GENMASK here
> that was my initial idea but I decided against it.
> the variant I came up with was: #define MISC_CLK_SEL_MASK    GENMASK(1, 0)
> 
> however, the actual offset is either 4 or 6 (depending on the PWM channel)
> and I felt that duplicating the macro would just make it more complicated
> so instead I chose to be consistent with MISC_CLK_DIV_MASK

An option would be:

	#define MISC_CLK_SEL_MASK(hwid)		GENMASK(1 + 4 * (hwid), 0 + 4 * (hwid))

(Note I didn't check a manual to the 4 above is probably wrong.)

Best regards
Uwe
Martin Blumenstingl May 28, 2019, 6:04 p.m. UTC | #4
Hi Uwe,

On Mon, May 27, 2019 at 8:00 PM Uwe Kleine-König
<u.kleine-koenig@pengutronix.de> wrote:
>
> On Mon, May 27, 2019 at 07:46:43PM +0200, Martin Blumenstingl wrote:
> > Hi Neil,
> >
> > On Mon, May 27, 2019 at 2:26 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
> > >
> > > On 25/05/2019 20:11, Martin Blumenstingl wrote:
> > > > MISC_CLK_SEL_WIDTH is only used in one place where it's converted into
> > > > a bit-mask. Rename and change the macro to be a bit-mask so that
> > > > conversion is not needed anymore. No functional changes intended.
> > > >
> > > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> > > > ---
> > > >  drivers/pwm/pwm-meson.c | 4 ++--
> > > >  1 file changed, 2 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
> > > > index c62a3ac924d0..84b28ba0f903 100644
> > > > --- a/drivers/pwm/pwm-meson.c
> > > > +++ b/drivers/pwm/pwm-meson.c
> > > > @@ -33,7 +33,7 @@
> > > >  #define MISC_A_CLK_DIV_SHIFT 8
> > > >  #define MISC_B_CLK_SEL_SHIFT 6
> > > >  #define MISC_A_CLK_SEL_SHIFT 4
> > > > -#define MISC_CLK_SEL_WIDTH   2
> > > > +#define MISC_CLK_SEL_MASK    0x3
> > >
> > > NIT I would have used GENMASK here
> > that was my initial idea but I decided against it.
> > the variant I came up with was: #define MISC_CLK_SEL_MASK    GENMASK(1, 0)
> >
> > however, the actual offset is either 4 or 6 (depending on the PWM channel)
> > and I felt that duplicating the macro would just make it more complicated
> > so instead I chose to be consistent with MISC_CLK_DIV_MASK
>
> An option would be:
>
>         #define MISC_CLK_SEL_MASK(hwid)         GENMASK(1 + 4 * (hwid), 0 + 4 * (hwid))
>
> (Note I didn't check a manual to the 4 above is probably wrong.)
that (or at least something similar) will work
the catch here is: we use it to initialize the mux clock and the
common clock framework expects us to set "shift" and "mask", while
mask starts at bit 0 instead of shift

this is how the current code is being used at the moment:
  channel->mux.shift = meson_pwm_per_channel_data[i].clk_sel_shift;
  channel->mux.mask = MISC_CLK_SEL_MASK;

so with MISC_CLK_SEL_MASK this would become:
  channel->mux.shift = meson_pwm_per_channel_data[i].clk_sel_shift;
  channel->mux.mask = MISC_CLK_SEL_MASK(i) >> channel->mux.shift;

or we could dynamically determine the "shift" using ffs or friends

my own brain parses the variant from the patch best
I'm happy to change it though if we can find something "better"


Martin
diff mbox series

Patch

diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index c62a3ac924d0..84b28ba0f903 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -33,7 +33,7 @@ 
 #define MISC_A_CLK_DIV_SHIFT	8
 #define MISC_B_CLK_SEL_SHIFT	6
 #define MISC_A_CLK_SEL_SHIFT	4
-#define MISC_CLK_SEL_WIDTH	2
+#define MISC_CLK_SEL_MASK	0x3
 #define MISC_B_EN		BIT(1)
 #define MISC_A_EN		BIT(0)
 
@@ -463,7 +463,7 @@  static int meson_pwm_init_channels(struct meson_pwm *meson,
 
 		channel->mux.reg = meson->base + REG_MISC_AB;
 		channel->mux.shift = mux_reg_shifts[i];
-		channel->mux.mask = BIT(MISC_CLK_SEL_WIDTH) - 1;
+		channel->mux.mask = MISC_CLK_SEL_MASK;
 		channel->mux.flags = 0;
 		channel->mux.lock = &meson->lock;
 		channel->mux.table = NULL;