@@ -9,6 +9,7 @@
#include "meson-g12b.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
/ {
compatible = "hardkernel,odroid-n2", "amlogic,g12b";
@@ -165,6 +166,65 @@
};
};
};
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "G12A-ODROIDN2";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
};
&cec_AO {
@@ -181,6 +241,10 @@
hdmi-phandle = <&hdmi_tx>;
};
+&clkc_audio {
+ status = "okay";
+};
+
&ext_mdio {
external_phy: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
@@ -198,6 +262,18 @@
amlogic,tx-delay-ns = <2>;
};
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
&gpio {
/*
* WARNING: The USB Hub on the Odroid-N2 needs a reset signal
@@ -269,6 +345,18 @@
vqmmc-supply = <&flash_1v8>;
};
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
+
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
Enable the sound card on the Hardkernel Odroid-N2, enabling HDMI output using the TDM interface B, being aligned on other boards sound cards. The internal DAC connected to the audio jack will be added later on, when driver support is added. Tested by running: tinymix set "FRDDR_A SRC 1 EN Switch" 1 tinymix set "FRDDR_A SINK 1 SEL" "OUT 1" tinymix set "FRDDR_B SRC 1 EN Switch" 1 tinymix set "FRDDR_B SINK 1 SEL" "OUT 1" tinymix set "FRDDR_C SRC 1 EN Switch" 1 tinymix set "FRDDR_C SINK 1 SEL" "OUT 1" tinymix set "TOHDMITX I2S SRC" "I2S B" tinymix set "TOHDMITX Switch" 1 then: tinymix set "TDMOUT_B SRC SEL" "IN 0" speaker-test -Dhw:0,0 -c2 then: tinymix set "TDMOUT_B SRC SEL" "IN 1" speaker-test -Dhw:0,1 -c2 then: tinymix set "TDMOUT_B SRC SEL" "IN 2" speaker-test -Dhw:0,2 -c2 testing HDMI audio output from the all 3 ASoC playback interfaces. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- .../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 88 +++++++++++++++++++ 1 file changed, 88 insertions(+)