@@ -824,6 +824,60 @@ static struct clk_regmap sm1_dsu_final_clk = {
},
};
+/* Datasheet names this field as "Cpu_clk_sync_mux_sel" bit 0 */
+static struct clk_regmap sm1_cpu1_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL6,
+ .mask = 0x1,
+ .shift = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpu1_clk",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_cpu_clk.hw,
+ /* This CPU also have a dedicated clock tree */
+ },
+ .num_parents = 1,
+ },
+};
+
+/* Datasheet names this field as "Cpu_clk_sync_mux_sel" bit 1 */
+static struct clk_regmap sm1_cpu2_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL6,
+ .mask = 0x1,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpu2_clk",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_cpu_clk.hw,
+ /* This CPU also have a dedicated clock tree */
+ },
+ .num_parents = 1,
+ },
+};
+
+/* Datasheet names this field as "Cpu_clk_sync_mux_sel" bit 2 */
+static struct clk_regmap sm1_cpu3_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL6,
+ .mask = 0x1,
+ .shift = 26,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpu3_clk",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_cpu_clk.hw,
+ /* This CPU also have a dedicated clock tree */
+ },
+ .num_parents = 1,
+ },
+};
+
/* Datasheet names this field as "Cpu_clk_sync_mux_sel" bit 4 */
static struct clk_regmap sm1_dsu_clk = {
.data = &(struct clk_regmap_mux_data){
@@ -4576,6 +4630,9 @@ static struct clk_hw_onecell_data sm1_hw_onecell_data = {
[CLKID_DSU_CLK_DYN] = &sm1_dsu_clk_dyn.hw,
[CLKID_DSU_CLK_FINAL] = &sm1_dsu_final_clk.hw,
[CLKID_DSU_CLK] = &sm1_dsu_clk.hw,
+ [CLKID_CPU1_CLK] = &sm1_cpu1_clk.hw,
+ [CLKID_CPU2_CLK] = &sm1_cpu2_clk.hw,
+ [CLKID_CPU3_CLK] = &sm1_cpu3_clk.hw,
[NR_CLKS] = NULL,
},
.num = NR_CLKS,
@@ -4807,6 +4864,9 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
&sm1_dsu_clk_dyn,
&sm1_dsu_final_clk,
&sm1_dsu_clk,
+ &sm1_cpu1_clk,
+ &sm1_cpu2_clk,
+ &sm1_cpu3_clk,
};
static const struct reg_sequence g12a_init_regs[] = {
@@ -257,8 +257,11 @@
#define CLKID_DSU_CLK_DYN 250
#define CLKID_DSU_CLK_FINAL 251
#define CLKID_DSU_CLK 252
+#define CLKID_CPU1_CLK 253
+#define CLKID_CPU2_CLK 254
+#define CLKID_CPU3_CLK 255
-#define NR_CLKS 253
+#define NR_CLKS 256
/* include the CLKIDs that have been made part of the DT binding */
#include <dt-bindings/clock/g12a-clkc.h>
The Amlogic SM1 can set a dedicated clock frequency for each CPU core by having a dedicate tree for each core similar to the CPU0 tree. Like the DSU tree, a supplementaty mux has been added to use the CPU0 frequency instead. But since the cluster only has a single power rail and shares a single PLL, it's not worth adding 3 unsused clock tree, so we add only the mux to select the CPU0 clock frequency for each CPU1, CPU2 and CPU3 cores. They are set read-only because the early boot stages sets them to select the CPU0 input clock. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- drivers/clk/meson/g12a.c | 60 ++++++++++++++++++++++++++++++++++++++++ drivers/clk/meson/g12a.h | 5 +++- 2 files changed, 64 insertions(+), 1 deletion(-)