Message ID | 20190823081427.17228-4-narmstrong@baylibre.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | arm64: meson-sm1: add support for the SM1 based VIM3 | expand |
On Fri, Aug 23, 2019 at 10:15 AM Neil Armstrong <narmstrong@baylibre.com> wrote: > > Add the Amlogic SM1 based Khadas VIM3, sharing all the same features > as the G12B based one, but: > - a different DVFS support since only a single cluster is available > - audio is still not available on SM1 > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> schematics are not available yet but this looks sane so: Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
On 25/08/2019 21:55, Martin Blumenstingl wrote: > On Fri, Aug 23, 2019 at 10:15 AM Neil Armstrong <narmstrong@baylibre.com> wrote: >> >> Add the Amlogic SM1 based Khadas VIM3, sharing all the same features >> as the G12B based one, but: >> - a different DVFS support since only a single cluster is available >> - audio is still not available on SM1 >> >> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> > schematics are not available yet but this looks sane so: > Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > I assume it's the same schematics as the A311D VIM3. BTW, as I asked on patch 2, Khadas asked me to rename the board to "vim3l", which is the commercial name, should I only change the DT name or also the compatible "khadas,vim3l" ? Neil
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index edbf128e7707..33690b2ae2e1 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -35,3 +35,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3.dts new file mode 100644 index 000000000000..3eb9cc5915d9 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3.dts @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +/dts-v1/; + +#include "meson-sm1.dtsi" +#include "meson-khadas-vim3.dtsi" + +/ { + compatible = "khadas,vim3", "amlogic,sm1"; + + vddcpu: regulator-vddcpu { + /* + * Silergy SY8030DEC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + + vin-supply = <&vsys_3v3>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU1_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU2_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU3_CLK>; + clock-latency = <50000>; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +};
Add the Amlogic SM1 based Khadas VIM3, sharing all the same features as the G12B based one, but: - a different DVFS support since only a single cluster is available - audio is still not available on SM1 Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../dts/amlogic/meson-sm1-khadas-vim3.dts | 69 +++++++++++++++++++ 2 files changed, 70 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3.dts