From patchwork Mon Oct 21 13:23:22 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 11202183 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 1E2F6913 for ; Mon, 21 Oct 2019 13:23:31 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id EF3A920873 for ; Mon, 21 Oct 2019 13:23:30 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="neoopJot"; dkim=fail reason="signature verification failed" (2048-bit key) header.d=baylibre-com.20150623.gappssmtp.com header.i=@baylibre-com.20150623.gappssmtp.com header.b="WNtwQkYb" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org EF3A920873 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=baylibre.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-amlogic-bounces+patchwork-linux-amlogic=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:Message-Id:Date:Subject:To :From:Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:In-Reply-To:References: List-Owner; bh=OZIQNBnenrdDR6227o3Zvg+wnQpaEn7lIYelDHdl8GU=; b=neoopJotc854xz gx9f09+WUCr/c6PdooJxo2j8o7bW9QeNofxjfBPmTQBmitQtMzHQ7R70CMRAX/bCOAYMnaTpXriAV DQIOSUcsWIN1Ps/2qGU4jto6V9d9AYYK/lXReGVXUM7fjAUR0v7Oz6SSfXQaOGazUDxR0P07KX4y8 IlYo04eAIOB4GFfGy+Rtz0AKXKRsZq3eqJUJRu815yiqCtJmXrLdfPJsUj6CH0LYs7Cy7lXWoT51t enthUN8qCzgkPuD7i7JS8PUbpdaIk+wwlHlJfUuy5o3xalbZ+OhUTfNUZMq3jpLuboCoJHyU42zBL heGDyAvzP0HIGG1cKy5g==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1iMXek-0006yn-Ne; Mon, 21 Oct 2019 13:23:30 +0000 Received: from mail-wm1-x331.google.com ([2a00:1450:4864:20::331]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1iMXeh-0006xw-2h for linux-amlogic@lists.infradead.org; Mon, 21 Oct 2019 13:23:29 +0000 Received: by mail-wm1-x331.google.com with SMTP id q13so3274087wmj.0 for ; Mon, 21 Oct 2019 06:23:26 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20150623.gappssmtp.com; s=20150623; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=CDpQCC3yQaQMDA2jPXME+EFagP8LNoO6pNZidHidAbs=; b=WNtwQkYbCYYxfHd5g5Gg7/NxW/2r1vdfDzKQVM1p0GqmijVDR7ay0t8fQd49OhlVH8 v1xTzmO7RCzs8DIzM+GC1R+O/e9f4IXYhWphWBnRs1g9+uSjZ/UW9LNNQ6R6Xe054ORJ rZW1kH/clT1ugXzyFKnFBKBW/sYlqn3lsi+OjTQ52Ws6u5zyNAJmXuHGRrGD/FU/o34N 6VMaoced7C9knxUN7e5A0DpnK4WQdf+FwmTioMRySDT67OUqbhIt1+3pNerW9RgQp6Rt 0DUE2wRdqWq04NS2c5o1sne3YLzKdy0wiW05agOS2RdADaTvlKraAjujh/a4cgF4HKUu o6nw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=CDpQCC3yQaQMDA2jPXME+EFagP8LNoO6pNZidHidAbs=; b=oCnvcuFQFGZ11Ez1EW8iXvlKxYuIQwxjqk8a18DlKRV9d13pJq3OCK66m8xTO8g3+v ++ZgDujMjlRwE8et3J+mdrldEEhmJYQ/AoJzesJLTt/uZgB9hUUc1Lj2R+AP9KW5fBHx lkbtWa617Lrku1xxjf4efqtMd6XXwVxi2VZFgzJ3PcmoL08lL+OP2Lb4IHHEzDlJlhQA 4eT6jsfpormN3yTIHUCzohq312NmLVHvuzxBtwzV0cASLBey0AY0EiaEi1ZrBVRUejej F69uES7MajfwSUBaMQqYFi7RyCGaCiP0ZWRh++GqnjwhjL9lVCGYLCvuZrpN6v1By+jR ijRg== X-Gm-Message-State: APjAAAUNh1ec1BzjymR43wBSMX42MuD5ewq+hRqTb6R2YrVJS2ThzesE XJHWFa2ZHYFAZg3p57Ux6FkDOPb+ygzV5g== X-Google-Smtp-Source: APXvYqzMvhIv/kFvCKgvdmqwvVk+AwoAtWuBDkfvwp/J9cbsOyOGAGd2wS++y4H9TfIXc0XMmtYvFg== X-Received: by 2002:a05:600c:3cb:: with SMTP id z11mr17883575wmd.134.1571664204796; Mon, 21 Oct 2019 06:23:24 -0700 (PDT) Received: from localhost.localdomain (lmontsouris-657-1-212-31.w90-63.abo.wanadoo.fr. [90.63.244.31]) by smtp.gmail.com with ESMTPSA id k8sm29169887wrg.15.2019.10.21.06.23.23 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 21 Oct 2019 06:23:24 -0700 (PDT) From: Neil Armstrong To: robh+dt@kernel.org Subject: [PATCH] dt-bindings: usb: dwc3: Move Amlogic G12A DWC3 Glue Bindings to YAML schemas Date: Mon, 21 Oct 2019 15:23:22 +0200 Message-Id: <20191021132322.25256-1-narmstrong@baylibre.com> X-Mailer: git-send-email 2.22.0 MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20191021_062327_184598_3FEDDC50 X-CRM114-Status: GOOD ( 16.82 ) X-Spam-Score: 0.0 (/) X-Spam-Report: SpamAssassin version 3.4.2 on bombadil.infradead.org summary: Content analysis details: (0.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at https://www.dnswl.org/, no trust [2a00:1450:4864:20:0:0:0:331 listed in] [list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid X-BeenThere: linux-amlogic@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, Neil Armstrong , linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org Sender: "linux-amlogic" Errors-To: linux-amlogic-bounces+patchwork-linux-amlogic=patchwork.kernel.org@lists.infradead.org Now that we have the DT validation in place, let's convert the device tree bindings for the Amlogic G12A DWC3 Glue Bindings over to a YAML schemas, the AXG and GXL glue bindings will be converted later. Signed-off-by: Neil Armstrong Reviewed-by: Martin Blumenstingl --- .../devicetree/bindings/usb/amlogic,dwc3.txt | 88 ------------ .../usb/amlogic,meson-g12a-usb-ctrl.yaml | 132 ++++++++++++++++++ 2 files changed, 132 insertions(+), 88 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml diff --git a/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt b/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt index b9f04e617eb7..9a8b631904fd 100644 --- a/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt @@ -40,91 +40,3 @@ Example device nodes: phy-names = "usb2-phy", "usb3-phy"; }; }; - -Amlogic Meson G12A DWC3 USB SoC Controller Glue - -The Amlogic G12A embeds a DWC3 USB IP Core configured for USB2 and USB3 -in host-only mode, and a DWC2 IP Core configured for USB2 peripheral mode -only. - -A glue connects the DWC3 core to USB2 PHYs and optionnaly to an USB3 PHY. - -One of the USB2 PHY can be re-routed in peripheral mode to a DWC2 USB IP. - -The DWC3 Glue controls the PHY routing and power, an interrupt line is -connected to the Glue to serve as OTG ID change detection. - -Required properties: -- compatible: Should be "amlogic,meson-g12a-usb-ctrl" -- clocks: a handle for the "USB" clock -- resets: a handle for the shared "USB" reset line -- reg: The base address and length of the registers -- interrupts: the interrupt specifier for the OTG detection -- phys: handle to used PHYs on the system - - a <0> phandle can be used if a PHY is not used -- phy-names: names of the used PHYs on the system : - - "usb2-phy0" for USB2 PHY0 if USBHOST_A port is used - - "usb2-phy1" for USB2 PHY1 if USBOTG_B port is used - - "usb3-phy0" for USB3 PHY if USB3_0 is used -- dr_mode: should be "host", "peripheral", or "otg" depending on - the usage and configuration of the OTG Capable port. - - "host" and "peripheral" means a fixed Host or Device only connection - - "otg" means the port can be used as both Host or Device and - be switched automatically using the OTG ID pin. - -Optional properties: -- vbus-supply: should be a phandle to the regulator controlling the VBUS - power supply when used in OTG switchable mode - -Required child nodes: - -A child node must exist to represent the core DWC3 IP block. The name of -the node is not important. The content of the node is defined in dwc3.txt. - -A child node must exist to represent the core DWC2 IP block. The name of -the node is not important. The content of the node is defined in dwc2.txt. - -PHY documentation is provided in the following places: -- Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt -- Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt - -Example device nodes: - usb: usb@ffe09000 { - compatible = "amlogic,meson-g12a-usb-ctrl"; - reg = <0x0 0xffe09000 0x0 0xa0>; - interrupts = ; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&clkc CLKID_USB>; - resets = <&reset RESET_USB>; - - dr_mode = "otg"; - - phys = <&usb2_phy0>, <&usb2_phy1>, - <&usb3_pcie_phy PHY_TYPE_USB3>; - phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0"; - - dwc2: usb@ff400000 { - compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; - reg = <0x0 0xff400000 0x0 0x40000>; - interrupts = ; - clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; - clock-names = "ddr"; - phys = <&usb2_phy1>; - dr_mode = "peripheral"; - g-rx-fifo-size = <192>; - g-np-tx-fifo-size = <128>; - g-tx-fifo-size = <128 128 16 16 16>; - }; - - dwc3: usb@ff500000 { - compatible = "snps,dwc3"; - reg = <0x0 0xff500000 0x0 0x100000>; - interrupts = ; - dr_mode = "host"; - snps,dis_u2_susphy_quirk; - snps,quirk-frame-length-adjustment; - }; - }; diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml new file mode 100644 index 000000000000..45bcc98ee9a4 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/usb/amlogic,meson-g12a-usb-ctrl.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson G12A DWC3 USB SoC Controller Glue + +maintainers: + - Neil Armstrong + +description: | + The Amlogic G12A embeds a DWC3 USB IP Core configured for USB2 and USB3 + in host-only mode, and a DWC2 IP Core configured for USB2 peripheral mode + only. + + A glue connects the DWC3 core to USB2 PHYs and optionnaly to an USB3 PHY. + + One of the USB2 PHY can be re-routed in peripheral mode to a DWC2 USB IP. + + The DWC3 Glue controls the PHY routing and power, an interrupt line is + connected to the Glue to serve as OTG ID change detection. + +properties: + compatible: + enum: + - amlogic,meson-g12a-usb-ctrl + + ranges: true + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + clocks: + minItems: 1 + + resets: + minItems: 1 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + phy-names: + items: + - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used + - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used + - const: usb3-phy0 # USB3 PHY if USB3_0 is used + + phys: + minItems: 1 + maxItems: 3 + + dr_mode: + enum: + - host # fixed Host connection + - peripheral # fixed Device connection + - otg # Host or Device and switched automatically using the OTG ID pin + + power-domains: + maxItems: 1 + + vbus-supply: + description: VBUS power supply when used in OTG switchable mode + maxItems: 1 + +patternProperties: + "^usb@[0-9a-f]+$": + type: object + +additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - ranges + - clocks + - resets + - reg + - interrupts + - phy-names + - phys + - dr_mode + +examples: + - | + usb: usb@ffe09000 { + compatible = "amlogic,meson-g12a-usb-ctrl"; + reg = <0x0 0xffe09000 0x0 0xa0>; + interrupts = <16>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&clkc_usb>; + resets = <&reset_usb>; + + dr_mode = "otg"; + + phys = <&usb2_phy0>, <&usb2_phy1>, <&usb3_phy0>; + phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0"; + + dwc2: usb@ff400000 { + compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; + reg = <0xff400000 0x40000>; + interrupts = <31>; + clocks = <&clkc_usb1>; + clock-names = "ddr"; + phys = <&usb2_phy1>; + dr_mode = "peripheral"; + g-rx-fifo-size = <192>; + g-np-tx-fifo-size = <128>; + g-tx-fifo-size = <128 128 16 16 16>; + }; + + dwc3: usb@ff500000 { + compatible = "snps,dwc3"; + reg = <0xff500000 0x100000>; + interrupts = <30>; + dr_mode = "host"; + snps,dis_u2_susphy_quirk; + snps,quirk-frame-length-adjustment; + }; + }; +