@@ -93,6 +93,15 @@ config COMMON_CLK_AXG_AUDIO
Support for the audio clock controller on AmLogic A113D devices,
aka axg, Say Y if you want audio subsystem to work.
+config COMMON_CLK_A1_PLL
+ bool
+ depends on ARCH_MESON
+ select COMMON_CLK_MESON_REGMAP
+ select COMMON_CLK_MESON_PLL
+ help
+ Support for the PLL clock controller on Amlogic A113L device,
+ aka a1. Say Y if you want PLL to work.
+
config COMMON_CLK_G12A
bool
depends on ARCH_MESON
@@ -16,6 +16,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
+obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
new file mode 100644
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "a1-pll.h"
+#include "clk-pll.h"
+#include "meson-eeclk.h"
+
+static struct clk_regmap a1_fixed_pll_dco = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .n = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .frac = {
+ .reg_off = ANACTRL_FIXPLL_CTRL1,
+ .shift = 0,
+ .width = 19,
+ },
+ .l = {
+ .reg_off = ANACTRL_FIXPLL_STS,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 29,
+ .width = 1,
+ },
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fixed_pll_dco",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "xtal_fixpll",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fixed_pll = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .bit_idx = 20,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "fixed_pll",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fixed_pll_dco.hw
+ },
+ .num_parents = 1,
+ /*
+ * It is enough that the fdiv leaf has critical flag,
+ * No critical or unused flag here.
+ */
+ },
+};
+
+static const struct pll_mult_range a1_hifi_pll_mult_range = {
+ .min = 32,
+ .max = 64,
+};
+
+static const struct reg_sequence a1_hifi_init_regs[] = {
+ { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x01800000 },
+ { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00001100 },
+ { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x100a1100 },
+ { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x00302000 },
+ { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x01f18440 },
+};
+
+static struct clk_regmap a1_hifi_pll = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .n = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .frac = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL1,
+ .shift = 0,
+ .width = 19,
+ },
+ .l = {
+ .reg_off = ANACTRL_HIFIPLL_STS,
+ .shift = 31,
+ .width = 1,
+ },
+ .current_en = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 26,
+ .width = 1,
+ },
+ .l_detect = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL2,
+ .shift = 6,
+ .width = 1,
+ },
+ .range = &a1_hifi_pll_mult_range,
+ .init_regs = a1_hifi_init_regs,
+ .init_count = ARRAY_SIZE(a1_hifi_init_regs),
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "hifi_pll",
+ .ops = &meson_clk_pll_ops,
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "xtal_hifipll",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor a1_fclk_div2_div = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fixed_pll.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fclk_div2 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .bit_idx = 21,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fclk_div2_div.hw
+ },
+ .num_parents = 1,
+ /*
+ * This clock is used by DDR clock in BL2 firmware
+ * and is required by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor a1_fclk_div3_div = {
+ .mult = 1,
+ .div = 3,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div3_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fixed_pll.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fclk_div3 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .bit_idx = 22,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div3",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fclk_div3_div.hw
+ },
+ .num_parents = 1,
+ /*
+ * This clock is used by APB bus which setted in Romcode
+ * and is required by the platform to operate correctly.
+ * About critical, refer to a1_fclk_div2.
+ */
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor a1_fclk_div5_div = {
+ .mult = 1,
+ .div = 5,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div5_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fixed_pll.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fclk_div5 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .bit_idx = 23,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div5",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fclk_div5_div.hw
+ },
+ .num_parents = 1,
+ /*
+ * This clock is used by AXI bus which setted in Romcode
+ * and is required by the platform to operate correctly.
+ * About critical, refer to a1_fclk_div2.
+ */
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor a1_fclk_div7_div = {
+ .mult = 1,
+ .div = 7,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div7_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fixed_pll.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fclk_div7 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div7",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fclk_div7_div.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+/* Array of all clocks provided by this provider */
+static struct clk_hw_onecell_data a1_pll_hw_onecell_data = {
+ .hws = {
+ [CLKID_FIXED_PLL_DCO] = &a1_fixed_pll_dco.hw,
+ [CLKID_FIXED_PLL] = &a1_fixed_pll.hw,
+ [CLKID_HIFI_PLL] = &a1_hifi_pll.hw,
+ [CLKID_FCLK_DIV2] = &a1_fclk_div2.hw,
+ [CLKID_FCLK_DIV3] = &a1_fclk_div3.hw,
+ [CLKID_FCLK_DIV5] = &a1_fclk_div5.hw,
+ [CLKID_FCLK_DIV7] = &a1_fclk_div7.hw,
+ [CLKID_FCLK_DIV2_DIV] = &a1_fclk_div2_div.hw,
+ [CLKID_FCLK_DIV3_DIV] = &a1_fclk_div3_div.hw,
+ [CLKID_FCLK_DIV5_DIV] = &a1_fclk_div5_div.hw,
+ [CLKID_FCLK_DIV7_DIV] = &a1_fclk_div7_div.hw,
+ [NR_PLL_CLKS] = NULL,
+ },
+ .num = NR_PLL_CLKS,
+};
+
+static struct clk_regmap *const a1_pll_regmaps[] = {
+ &a1_fixed_pll_dco,
+ &a1_fixed_pll,
+ &a1_hifi_pll,
+ &a1_fclk_div2,
+ &a1_fclk_div3,
+ &a1_fclk_div5,
+ &a1_fclk_div7,
+};
+
+static struct regmap_config clkc_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
+static int meson_a1_pll_probe(struct platform_device *pdev)
+{
+ const struct meson_eeclkc_data *data;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ void __iomem *base;
+ struct regmap *map;
+ int ret, i;
+
+ data = of_device_get_match_data(dev);
+ if (!data)
+ return -EINVAL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ map = devm_regmap_init_mmio(dev, base, &clkc_regmap_config);
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+
+ /* Populate regmap for the regmap backed clocks */
+ for (i = 0; i < data->regmap_clk_num; i++)
+ data->regmap_clks[i]->map = map;
+
+ for (i = 0; i < data->hw_onecell_data->num; i++) {
+ /* array might be sparse */
+ if (!data->hw_onecell_data->hws[i])
+ continue;
+
+ ret = devm_clk_hw_register(dev, data->hw_onecell_data->hws[i]);
+ if (ret) {
+ dev_err(dev, "Clock registration failed\n");
+ return ret;
+ }
+ }
+
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ data->hw_onecell_data);
+}
+
+static const struct meson_eeclkc_data a1_pll_data = {
+ .regmap_clks = a1_pll_regmaps,
+ .regmap_clk_num = ARRAY_SIZE(a1_pll_regmaps),
+ .hw_onecell_data = &a1_pll_hw_onecell_data,
+};
+
+static const struct of_device_id clkc_match_table[] = {
+ {
+ .compatible = "amlogic,a1-pll-clkc",
+ .data = &a1_pll_data
+ },
+ {}
+};
+
+static struct platform_driver a1_pll_driver = {
+ .probe = meson_a1_pll_probe,
+ .driver = {
+ .name = "a1-pll-clkc",
+ .of_match_table = clkc_match_table,
+ },
+};
+
+builtin_platform_driver(a1_pll_driver);
new file mode 100644
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __A1_PLL_H
+#define __A1_PLL_H
+
+/* PLL register offset */
+#define ANACTRL_FIXPLL_CTRL0 0x0
+#define ANACTRL_FIXPLL_CTRL1 0x4
+#define ANACTRL_FIXPLL_CTRL2 0x8
+#define ANACTRL_FIXPLL_CTRL3 0xc
+#define ANACTRL_FIXPLL_CTRL4 0x10
+#define ANACTRL_FIXPLL_STS 0x14
+#define ANACTRL_SYSPLL_CTRL0 0x80
+#define ANACTRL_SYSPLL_CTRL1 0x84
+#define ANACTRL_SYSPLL_CTRL2 0x88
+#define ANACTRL_SYSPLL_CTRL3 0x8c
+#define ANACTRL_SYSPLL_CTRL4 0x90
+#define ANACTRL_SYSPLL_STS 0x94
+#define ANACTRL_HIFIPLL_CTRL0 0xc0
+#define ANACTRL_HIFIPLL_CTRL1 0xc4
+#define ANACTRL_HIFIPLL_CTRL2 0xc8
+#define ANACTRL_HIFIPLL_CTRL3 0xcc
+#define ANACTRL_HIFIPLL_CTRL4 0xd0
+#define ANACTRL_HIFIPLL_STS 0xd4
+#define ANACTRL_AUDDDS_CTRL0 0x100
+#define ANACTRL_AUDDDS_CTRL1 0x104
+#define ANACTRL_AUDDDS_CTRL2 0x108
+#define ANACTRL_AUDDDS_CTRL3 0x10c
+#define ANACTRL_AUDDDS_CTRL4 0x110
+#define ANACTRL_AUDDDS_STS 0x114
+#define ANACTRL_MISCTOP_CTRL0 0x140
+#define ANACTRL_POR_CNTL 0x188
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/a1-pll-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_FIXED_PLL_DCO 0
+#define CLKID_FCLK_DIV2_DIV 2
+#define CLKID_FCLK_DIV3_DIV 3
+#define CLKID_FCLK_DIV5_DIV 4
+#define CLKID_FCLK_DIV7_DIV 5
+#define NR_PLL_CLKS 11
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/a1-pll-clkc.h>
+
+#endif /* __A1_PLL_H */
The Amlogic A1 clock includes three drivers: pll clocks, peripheral clocks, CPU clocks. sys pll and CPU clocks will be sent in next patch. Unlike the previous series, there is no EE/AO domain in A1 CLK controllers. Signed-off-by: Jian Hu <jian.hu@amlogic.com> --- drivers/clk/meson/Kconfig | 9 + drivers/clk/meson/Makefile | 1 + drivers/clk/meson/a1-pll.c | 374 +++++++++++++++++++++++++++++++++++++ drivers/clk/meson/a1-pll.h | 56 ++++++ 4 files changed, 440 insertions(+) create mode 100644 drivers/clk/meson/a1-pll.c create mode 100644 drivers/clk/meson/a1-pll.h