diff mbox series

[2/2] arm64: dts: meson-axg: add MIPI DSI PHY nodes

Message ID 20201120152131.3918814-3-narmstrong@baylibre.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: meson-axg-s400: add support for Power Controller & MIPI-DSI PHY | expand

Commit Message

Neil Armstrong Nov. 20, 2020, 3:21 p.m. UTC 
This adds the nodes for :
- MIPI DSI+PCIe analog phy
- MIPI D-PHY

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 288667699ec0..d811708f8f67 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1159,6 +1159,12 @@  pwrc: power-controller {
 							       <250000000>,
 							       <0>; /* Do Nothing */
 				};
+
+				mipi_pcie_analog_dphy: phy {
+					compatible = "amlogic,axg-mipi-pcie-analog-phy";
+					#phy-cells = <0>;
+					status = "disabled";
+				};
 			};
 		};
 
@@ -1171,6 +1177,19 @@  mailbox: mailbox@ff63c404 {
 			#mbox-cells = <1>;
 		};
 
+		mipi_dphy: phy@ff640000 {
+			compatible = "amlogic,axg-mipi-dphy";
+			reg = <0x0 0xff640000 0x0 0x100>;
+			clocks = <&clkc CLKID_MIPI_DSI_PHY>;
+			clock-names = "pclk";
+			resets = <&reset RESET_MIPI_PHY>;
+			reset-names = "phy";
+			phys = <&mipi_pcie_analog_dphy>;
+			phy-names = "analog";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		audio: bus@ff642000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xff642000 0x0 0x2000>;