| Message ID | 20210119202424.591349-1-martin.blumenstingl@googlemail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | net: stmmac: dwmac-meson8b: fix the RX delay validation | expand |
Hello: This patch was applied to netdev/net-next.git (refs/heads/master): On Tue, 19 Jan 2021 21:24:24 +0100 you wrote: > When has_prg_eth1_rgmii_rx_delay is true then we support RX delays > between 0ps and 3000ps in 200ps steps. Swap the validation of the RX > delay based on the has_prg_eth1_rgmii_rx_delay flag so the 200ps check > is now applied correctly on G12A SoCs (instead of only allow 0ps or > 2000ps on G12A, but 0..3000ps in 200ps steps on older SoCs which don't > support that). > > [...] Here is the summary with links: - net: stmmac: dwmac-meson8b: fix the RX delay validation https://git.kernel.org/netdev/net-next/c/9e8789c85dee You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c index 55152d7ba99a..848e5c37746b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c @@ -443,16 +443,16 @@ static int meson8b_dwmac_probe(struct platform_device *pdev) } if (dwmac->data->has_prg_eth1_rgmii_rx_delay) { - if (dwmac->rx_delay_ps != 0 && dwmac->rx_delay_ps != 2000) { + if (dwmac->rx_delay_ps > 3000 || dwmac->rx_delay_ps % 200) { dev_err(dwmac->dev, - "The only allowed RGMII RX delays values are: 0ps, 2000ps"); + "The RGMII RX delay range is 0..3000ps in 200ps steps"); ret = -EINVAL; goto err_remove_config_dt; } } else { - if (dwmac->rx_delay_ps > 3000 || dwmac->rx_delay_ps % 200) { + if (dwmac->rx_delay_ps != 0 && dwmac->rx_delay_ps != 2000) { dev_err(dwmac->dev, - "The RGMII RX delay range is 0..3000ps in 200ps steps"); + "The only allowed RGMII RX delays values are: 0ps, 2000ps"); ret = -EINVAL; goto err_remove_config_dt; }
When has_prg_eth1_rgmii_rx_delay is true then we support RX delays between 0ps and 3000ps in 200ps steps. Swap the validation of the RX delay based on the has_prg_eth1_rgmii_rx_delay flag so the 200ps check is now applied correctly on G12A SoCs (instead of only allow 0ps or 2000ps on G12A, but 0..3000ps in 200ps steps on older SoCs which don't support that). Fixes: de94fc104d58ea ("net: stmmac: dwmac-meson8b: add support for the RGMII RX delay on G12A") Reported-by: Martijn van Deventer <martijn@martijnvandeventer.nl> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- Many thanks to Martijn for this excellent catch and for reporting this issue (off-list)! drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)