| Message ID | 20210129065137.5473-4-christianshewitt@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: meson: add support for ODROID-HC4 | expand |
On 29/01/2021 07:51, Christian Hewitt wrote: > Convert the ODRIOD-C4 dts to meson-sm1-odroid.dtsi and C4 board dts in > preparation for adding additional C4 family boards. > > Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> > --- > .../boot/dts/amlogic/meson-sm1-odroid-c4.dts | 427 +---------------- > .../boot/dts/amlogic/meson-sm1-odroid.dtsi | 441 ++++++++++++++++++ > 2 files changed, 442 insertions(+), 426 deletions(-) > create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi > > diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts > index eadd75e6e067..b2a4e823c1d8 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts > @@ -5,34 +5,12 @@ > > /dts-v1/; > > -#include "meson-sm1.dtsi" > -#include <dt-bindings/gpio/meson-g12a-gpio.h> > -#include <dt-bindings/leds/common.h> > -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> > +#include "meson-sm1-odroid.dtsi" > > / { > compatible = "hardkernel,odroid-c4", "amlogic,sm1"; > model = "Hardkernel ODROID-C4"; > > - aliases { > - serial0 = &uart_AO; > - ethernet0 = ðmac; > - }; > - > - chosen { > - stdout-path = "serial0:115200n8"; > - }; > - > - memory@0 { > - device_type = "memory"; > - reg = <0x0 0x0 0x0 0x40000000>; > - }; > - > - emmc_pwrseq: emmc-pwrseq { > - compatible = "mmc-pwrseq-emmc"; > - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; > - }; > - > leds { > compatible = "gpio-leds"; > > @@ -45,96 +23,6 @@ > }; > }; > > - tflash_vdd: regulator-tflash_vdd { > - compatible = "regulator-fixed"; > - > - regulator-name = "TFLASH_VDD"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; > - enable-active-high; > - regulator-always-on; > - }; > - > - tf_io: gpio-regulator-tf_io { > - compatible = "regulator-gpio"; > - > - regulator-name = "TF_IO"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - > - gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>; > - gpios-states = <0>; > - > - states = <3300000 0>, > - <1800000 1>; > - }; > - > - flash_1v8: regulator-flash_1v8 { > - compatible = "regulator-fixed"; > - regulator-name = "FLASH_1V8"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - vin-supply = <&vcc_3v3>; > - regulator-always-on; > - }; > - > - main_12v: regulator-main_12v { > - compatible = "regulator-fixed"; > - regulator-name = "12V"; > - regulator-min-microvolt = <12000000>; > - regulator-max-microvolt = <12000000>; > - regulator-always-on; > - }; > - > - vcc_5v: regulator-vcc_5v { > - compatible = "regulator-fixed"; > - regulator-name = "5V"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - regulator-always-on; > - vin-supply = <&main_12v>; > - }; > - > - vcc_1v8: regulator-vcc_1v8 { > - compatible = "regulator-fixed"; > - regulator-name = "VCC_1V8"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - vin-supply = <&vcc_3v3>; > - regulator-always-on; > - }; > - > - vcc_3v3: regulator-vcc_3v3 { > - compatible = "regulator-fixed"; > - regulator-name = "VCC_3V3"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&vddao_3v3>; > - regulator-always-on; > - /* FIXME: actually controlled by VDDCPU_B_EN */ > - }; > - > - vddcpu: regulator-vddcpu { > - /* > - * MP8756GD Regulator. > - */ > - compatible = "pwm-regulator"; > - > - regulator-name = "VDDCPU"; > - regulator-min-microvolt = <721000>; > - regulator-max-microvolt = <1022000>; > - > - vin-supply = <&main_12v>; > - > - pwms = <&pwm_AO_cd 1 1250 0>; > - pwm-dutycycle-range = <100 0>; > - > - regulator-boot-on; > - regulator-always-on; > - }; > - > hub_5v: regulator-hub_5v { > compatible = "regulator-fixed"; > regulator-name = "HUB_5V"; > @@ -147,215 +35,12 @@ > enable-active-high; > }; > > - usb_pwr_en: regulator-usb_pwr_en { > - compatible = "regulator-fixed"; > - regulator-name = "USB_PWR_EN"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc_5v>; > - > - /* Connected to the microUSB port power enable */ > - gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; > - enable-active-high; > - }; > - > - vddao_1v8: regulator-vddao_1v8 { > - compatible = "regulator-fixed"; > - regulator-name = "VDDAO_1V8"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - vin-supply = <&vddao_3v3>; > - regulator-always-on; > - }; > - > - vddao_3v3: regulator-vddao_3v3 { > - compatible = "regulator-fixed"; > - regulator-name = "VDDAO_3V3"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&main_12v>; > - regulator-always-on; > - }; > - > - hdmi-connector { > - compatible = "hdmi-connector"; > - type = "a"; > - > - port { > - hdmi_connector_in: endpoint { > - remote-endpoint = <&hdmi_tx_tmds_out>; > - }; > - }; > - }; > - > sound { > - compatible = "amlogic,axg-sound-card"; > model = "ODROID-C4"; > - audio-aux-devs = <&tdmout_b>; > - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", > - "TDMOUT_B IN 1", "FRDDR_B OUT 1", > - "TDMOUT_B IN 2", "FRDDR_C OUT 1", > - "TDM_B Playback", "TDMOUT_B OUT"; > - > - assigned-clocks = <&clkc CLKID_MPLL2>, > - <&clkc CLKID_MPLL0>, > - <&clkc CLKID_MPLL1>; > - assigned-clock-parents = <0>, <0>, <0>; > - assigned-clock-rates = <294912000>, > - <270950400>, > - <393216000>; > - status = "okay"; > - > - dai-link-0 { > - sound-dai = <&frddr_a>; > - }; > - > - dai-link-1 { > - sound-dai = <&frddr_b>; > - }; > - > - dai-link-2 { > - sound-dai = <&frddr_c>; > - }; > - > - /* 8ch hdmi interface */ > - dai-link-3 { > - sound-dai = <&tdmif_b>; > - dai-format = "i2s"; > - dai-tdm-slot-tx-mask-0 = <1 1>; > - dai-tdm-slot-tx-mask-1 = <1 1>; > - dai-tdm-slot-tx-mask-2 = <1 1>; > - dai-tdm-slot-tx-mask-3 = <1 1>; > - mclk-fs = <256>; > - > - codec { > - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; > - }; > - }; > - > - /* hdmi glue */ > - dai-link-4 { > - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; > - > - codec { > - sound-dai = <&hdmi_tx>; > - }; > - }; > - }; > -}; > - > -&arb { > - status = "okay"; > -}; > - > -&clkc_audio { > - status = "okay"; > -}; > - > -&cpu0 { > - cpu-supply = <&vddcpu>; > - operating-points-v2 = <&cpu_opp_table>; > - clocks = <&clkc CLKID_CPU_CLK>; > - clock-latency = <50000>; > -}; > - > -&cpu1 { > - cpu-supply = <&vddcpu>; > - operating-points-v2 = <&cpu_opp_table>; > - clocks = <&clkc CLKID_CPU1_CLK>; > - clock-latency = <50000>; > -}; > - > -&cpu2 { > - cpu-supply = <&vddcpu>; > - operating-points-v2 = <&cpu_opp_table>; > - clocks = <&clkc CLKID_CPU2_CLK>; > - clock-latency = <50000>; > -}; > - > -&cpu3 { > - cpu-supply = <&vddcpu>; > - operating-points-v2 = <&cpu_opp_table>; > - clocks = <&clkc CLKID_CPU3_CLK>; > - clock-latency = <50000>; > -}; > - > -&ext_mdio { > - external_phy: ethernet-phy@0 { > - /* Realtek RTL8211F (0x001cc916) */ > - reg = <0>; > - max-speed = <1000>; > - > - interrupt-parent = <&gpio_intc>; > - /* MAC_INTR on GPIOZ_14 */ > - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; > }; > }; > > -ðmac { > - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; > - pinctrl-names = "default"; > - status = "okay"; > - phy-mode = "rgmii"; > - phy-handle = <&external_phy>; > - amlogic,tx-delay-ns = <2>; > -}; > - > -&frddr_a { > - status = "okay"; > -}; > - > -&frddr_b { > - status = "okay"; > -}; > - > -&frddr_c { > - status = "okay"; > -}; > - > &gpio { > - gpio-line-names = > - /* GPIOZ */ > - "", "", "", "", "", "", "", "", > - "", "", "", "", "", "", "", "", > - /* GPIOH */ > - "", "", "", "", "", > - "PIN_36", /* GPIOH_5 */ > - "PIN_26", /* GPIOH_6 */ > - "PIN_32", /* GPIOH_7 */ > - "", > - /* BOOT */ > - "", "", "", "", "", "", "", "", > - "", "", "", "", "", "", "", "", > - /* GPIOC */ > - "", "", "", "", "", "", "", "", > - /* GPIOA */ > - "", "", "", "", "", "", "", "", > - "", "", "", "", "", "", > - "PIN_27", /* GPIOA_14 */ > - "PIN_28", /* GPIOA_15 */ > - /* GPIOX */ > - "PIN_16", /* GPIOX_0 */ > - "PIN_18", /* GPIOX_1 */ > - "PIN_22", /* GPIOX_2 */ > - "PIN_11", /* GPIOX_3 */ > - "PIN_13", /* GPIOX_4 */ > - "PIN_7", /* GPIOX_5 */ > - "PIN_33", /* GPIOX_6 */ > - "PIN_15", /* GPIOX_7 */ > - "PIN_19", /* GPIOX_8 */ > - "PIN_21", /* GPIOX_9 */ > - "PIN_24", /* GPIOX_10 */ > - "PIN_23", /* GPIOX_11 */ > - "PIN_8", /* GPIOX_12 */ > - "PIN_10", /* GPIOX_13 */ > - "PIN_29", /* GPIOX_14 */ > - "PIN_31", /* GPIOX_15 */ > - "PIN_12", /* GPIOX_16 */ > - "PIN_3", /* GPIOX_17 */ > - "PIN_5", /* GPIOX_18 */ > - "PIN_35"; /* GPIOX_19 */ > - > /* > * WARNING: The USB Hub on the Odroid-C4 needs a reset signal > * to be turned high in order to be detected by the USB Controller > @@ -370,120 +55,10 @@ > }; > }; > > -&gpio_ao { > - gpio-line-names = > - /* GPIOAO */ > - "", "", "", "", > - "PIN_47", /* GPIOAO_4 */ > - "", "", > - "PIN_45", /* GPIOAO_7 */ > - "PIN_46", /* GPIOAO_8 */ > - "PIN_44", /* GPIOAO_9 */ > - "PIN_42", /* GPIOAO_10 */ > - "", > - /* GPIOE */ > - "", "", ""; > -}; > - > -&hdmi_tx { > - status = "okay"; > - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; > - pinctrl-names = "default"; > - hdmi-supply = <&vcc_5v>; > -}; > - > -&hdmi_tx_tmds_port { > - hdmi_tx_tmds_out: endpoint { > - remote-endpoint = <&hdmi_connector_in>; > - }; > -}; > - > &ir { > - status = "okay"; > - pinctrl-0 = <&remote_input_ao_pins>; > - pinctrl-names = "default"; > linux,rc-map-name = "rc-odroid"; > }; > > -&pwm_AO_cd { > - pinctrl-0 = <&pwm_ao_d_e_pins>; > - pinctrl-names = "default"; > - clocks = <&xtal>; > - clock-names = "clkin1"; > - status = "okay"; > -}; > - > -&saradc { > - status = "okay"; > -}; > - > -/* SD card */ > -&sd_emmc_b { > - status = "okay"; > - pinctrl-0 = <&sdcard_c_pins>; > - pinctrl-1 = <&sdcard_clk_gate_c_pins>; > - pinctrl-names = "default", "clk-gate"; > - > - bus-width = <4>; > - cap-sd-highspeed; > - max-frequency = <200000000>; > - sd-uhs-sdr12; > - sd-uhs-sdr25; > - sd-uhs-sdr50; > - sd-uhs-sdr104; > - disable-wp; > - > - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; > - vmmc-supply = <&tflash_vdd>; > - vqmmc-supply = <&tf_io>; > -}; > - > -/* eMMC */ > -&sd_emmc_c { > - status = "okay"; > - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; > - pinctrl-1 = <&emmc_clk_gate_pins>; > - pinctrl-names = "default", "clk-gate"; > - > - bus-width = <8>; > - cap-mmc-highspeed; > - mmc-ddr-1_8v; > - mmc-hs200-1_8v; > - max-frequency = <200000000>; > - disable-wp; > - > - mmc-pwrseq = <&emmc_pwrseq>; > - vmmc-supply = <&vcc_3v3>; > - vqmmc-supply = <&flash_1v8>; > -}; > - > -&tdmif_b { > - status = "okay"; > -}; > - > -&tdmout_b { > - status = "okay"; > -}; > - > -&tohdmitx { > - status = "okay"; > -}; > - > -&uart_AO { > - status = "okay"; > - pinctrl-0 = <&uart_ao_a_pins>; > - pinctrl-names = "default"; > -}; > - > -&usb { > - status = "okay"; > - vbus-supply = <&usb_pwr_en>; > -}; > - > -&usb2_phy0 { > - phy-supply = <&vcc_5v>; > -}; > - > &usb2_phy1 { > /* Enable the hub which is connected to this port */ > phy-supply = <&hub_5v>; > diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi > new file mode 100644 > index 000000000000..a66d55d93183 > --- /dev/null > +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi > @@ -0,0 +1,441 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com> > + */ > + > +#include "meson-sm1.dtsi" > +#include <dt-bindings/gpio/meson-g12a-gpio.h> > +#include <dt-bindings/leds/common.h> > +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> > + > +/ { > + aliases { > + serial0 = &uart_AO; > + ethernet0 = ðmac; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + memory@0 { > + device_type = "memory"; > + reg = <0x0 0x0 0x0 0x40000000>; > + }; > + > + emmc_pwrseq: emmc-pwrseq { > + compatible = "mmc-pwrseq-emmc"; > + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; > + }; > + > + tflash_vdd: regulator-tflash_vdd { > + compatible = "regulator-fixed"; > + > + regulator-name = "TFLASH_VDD"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; > + enable-active-high; > + regulator-always-on; > + }; > + > + tf_io: gpio-regulator-tf_io { > + compatible = "regulator-gpio"; > + > + regulator-name = "TF_IO"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + > + gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>; > + gpios-states = <0>; > + > + states = <3300000 0>, > + <1800000 1>; > + }; > + > + flash_1v8: regulator-flash_1v8 { > + compatible = "regulator-fixed"; > + regulator-name = "FLASH_1V8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + vin-supply = <&vcc_3v3>; > + regulator-always-on; > + }; > + > + main_12v: regulator-main_12v { > + compatible = "regulator-fixed"; > + regulator-name = "12V"; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + regulator-always-on; > + }; > + > + vcc_5v: regulator-vcc_5v { > + compatible = "regulator-fixed"; > + regulator-name = "5V"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + vin-supply = <&main_12v>; > + }; > + > + vcc_1v8: regulator-vcc_1v8 { > + compatible = "regulator-fixed"; > + regulator-name = "VCC_1V8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + vin-supply = <&vcc_3v3>; > + regulator-always-on; > + }; > + > + vcc_3v3: regulator-vcc_3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VCC_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vddao_3v3>; > + regulator-always-on; > + /* FIXME: actually controlled by VDDCPU_B_EN */ > + }; > + > + vddcpu: regulator-vddcpu { > + /* > + * MP8756GD Regulator. > + */ > + compatible = "pwm-regulator"; > + > + regulator-name = "VDDCPU"; > + regulator-min-microvolt = <721000>; > + regulator-max-microvolt = <1022000>; > + > + vin-supply = <&main_12v>; > + > + pwms = <&pwm_AO_cd 1 1250 0>; > + pwm-dutycycle-range = <100 0>; > + > + regulator-boot-on; > + regulator-always-on; > + }; > + > + usb_pwr_en: regulator-usb_pwr_en { > + compatible = "regulator-fixed"; > + regulator-name = "USB_PWR_EN"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc_5v>; > + > + /* Connected to the microUSB port power enable */ > + gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + vddao_1v8: regulator-vddao_1v8 { > + compatible = "regulator-fixed"; > + regulator-name = "VDDAO_1V8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + vin-supply = <&vddao_3v3>; > + regulator-always-on; > + }; > + > + vddao_3v3: regulator-vddao_3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VDDAO_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&main_12v>; > + regulator-always-on; > + }; > + > + hdmi-connector { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_connector_in: endpoint { > + remote-endpoint = <&hdmi_tx_tmds_out>; > + }; > + }; > + }; > + > + sound { > + compatible = "amlogic,axg-sound-card"; > + audio-aux-devs = <&tdmout_b>; > + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", > + "TDMOUT_B IN 1", "FRDDR_B OUT 1", > + "TDMOUT_B IN 2", "FRDDR_C OUT 1", > + "TDM_B Playback", "TDMOUT_B OUT"; > + > + assigned-clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + > + assigned-clock-parents = <0>, <0>, <0>; > + assigned-clock-rates = <294912000>, > + <270950400>, > + <393216000>; > + status = "okay"; > + > + dai-link-0 { > + sound-dai = <&frddr_a>; > + }; > + > + dai-link-1 { > + sound-dai = <&frddr_b>; > + }; > + > + dai-link-2 { > + sound-dai = <&frddr_c>; > + }; > + > + /* 8ch hdmi interface */ > + dai-link-3 { > + sound-dai = <&tdmif_b>; > + dai-format = "i2s"; > + dai-tdm-slot-tx-mask-0 = <1 1>; > + dai-tdm-slot-tx-mask-1 = <1 1>; > + dai-tdm-slot-tx-mask-2 = <1 1>; > + dai-tdm-slot-tx-mask-3 = <1 1>; > + mclk-fs = <256>; > + > + codec { > + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; > + }; > + }; > + > + /* hdmi glue */ > + dai-link-4 { > + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; > + codec { > + sound-dai = <&hdmi_tx>; > + }; > + }; > + }; > +}; > + > +&arb { > + status = "okay"; > +}; > + > +&clkc_audio { > + status = "okay"; > +}; > + > +&cpu0 { > + cpu-supply = <&vddcpu>; > + operating-points-v2 = <&cpu_opp_table>; > + clocks = <&clkc CLKID_CPU_CLK>; > + clock-latency = <50000>; > +}; > + > +&cpu1 { > + cpu-supply = <&vddcpu>; > + operating-points-v2 = <&cpu_opp_table>; > + clocks = <&clkc CLKID_CPU1_CLK>; > + clock-latency = <50000>; > +}; > + > +&cpu2 { > + cpu-supply = <&vddcpu>; > + operating-points-v2 = <&cpu_opp_table>; > + clocks = <&clkc CLKID_CPU2_CLK>; > + clock-latency = <50000>; > +}; > + > +&cpu3 { > + cpu-supply = <&vddcpu>; > + operating-points-v2 = <&cpu_opp_table>; > + clocks = <&clkc CLKID_CPU3_CLK>; > + clock-latency = <50000>; > +}; > + > +&ext_mdio { > + external_phy: ethernet-phy@0 { > + /* Realtek RTL8211F (0x001cc916) */ > + reg = <0>; > + max-speed = <1000>; > + > + interrupt-parent = <&gpio_intc>; > + /* MAC_INTR on GPIOZ_14 */ > + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; > + }; > +}; > + > +ðmac { > + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; > + pinctrl-names = "default"; > + status = "okay"; > + phy-mode = "rgmii"; > + phy-handle = <&external_phy>; > + amlogic,tx-delay-ns = <2>; > +}; > + > +&frddr_a { > + status = "okay"; > +}; > + > +&frddr_b { > + status = "okay"; > +}; > + > +&frddr_c { > + status = "okay"; > +}; > + > +&gpio { > + gpio-line-names = > + /* GPIOZ */ > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", "", > + /* GPIOH */ > + "", "", "", "", "", > + "PIN_36", /* GPIOH_5 */ > + "PIN_26", /* GPIOH_6 */ > + "PIN_32", /* GPIOH_7 */ > + "", > + /* BOOT */ > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", "", > + /* GPIOC */ > + "", "", "", "", "", "", "", "", > + /* GPIOA */ > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", > + "PIN_27", /* GPIOA_14 */ > + "PIN_28", /* GPIOA_15 */ > + /* GPIOX */ > + "PIN_16", /* GPIOX_0 */ > + "PIN_18", /* GPIOX_1 */ > + "PIN_22", /* GPIOX_2 */ > + "PIN_11", /* GPIOX_3 */ > + "PIN_13", /* GPIOX_4 */ > + "PIN_7", /* GPIOX_5 */ > + "PIN_33", /* GPIOX_6 */ > + "PIN_15", /* GPIOX_7 */ > + "PIN_19", /* GPIOX_8 */ > + "PIN_21", /* GPIOX_9 */ > + "PIN_24", /* GPIOX_10 */ > + "PIN_23", /* GPIOX_11 */ > + "PIN_8", /* GPIOX_12 */ > + "PIN_10", /* GPIOX_13 */ > + "PIN_29", /* GPIOX_14 */ > + "PIN_31", /* GPIOX_15 */ > + "PIN_12", /* GPIOX_16 */ > + "PIN_3", /* GPIOX_17 */ > + "PIN_5", /* GPIOX_18 */ > + "PIN_35"; /* GPIOX_19 */ > +}; > + > +&gpio_ao { > + gpio-line-names = > + /* GPIOAO */ > + "", "", "", "", > + "PIN_47", /* GPIOAO_4 */ > + "", "", > + "PIN_45", /* GPIOAO_7 */ > + "PIN_46", /* GPIOAO_8 */ > + "PIN_44", /* GPIOAO_9 */ > + "PIN_42", /* GPIOAO_10 */ > + "", > + /* GPIOE */ > + "", "", ""; > +}; > + > +&hdmi_tx { > + status = "okay"; > + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; > + pinctrl-names = "default"; > + hdmi-supply = <&vcc_5v>; > +}; > + > +&hdmi_tx_tmds_port { > + hdmi_tx_tmds_out: endpoint { > + remote-endpoint = <&hdmi_connector_in>; > + }; > +}; > + > +&ir { > + status = "okay"; > + pinctrl-0 = <&remote_input_ao_pins>; > + pinctrl-names = "default"; > +}; > + > +&pwm_AO_cd { > + pinctrl-0 = <&pwm_ao_d_e_pins>; > + pinctrl-names = "default"; > + clocks = <&xtal>; > + clock-names = "clkin1"; > + status = "okay"; > +}; > + > +&saradc { > + status = "okay"; > +}; > + > +/* SD card */ > +&sd_emmc_b { > + status = "okay"; > + pinctrl-0 = <&sdcard_c_pins>; > + pinctrl-1 = <&sdcard_clk_gate_c_pins>; > + pinctrl-names = "default", "clk-gate"; > + > + bus-width = <4>; > + cap-sd-highspeed; > + max-frequency = <200000000>; > + sd-uhs-sdr12; > + sd-uhs-sdr25; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + disable-wp; > + > + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; > + vmmc-supply = <&tflash_vdd>; > + vqmmc-supply = <&tf_io>; > +}; > + > +/* eMMC */ > +&sd_emmc_c { > + status = "okay"; > + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; > + pinctrl-1 = <&emmc_clk_gate_pins>; > + pinctrl-names = "default", "clk-gate"; > + > + bus-width = <8>; > + cap-mmc-highspeed; > + mmc-ddr-1_8v; > + mmc-hs200-1_8v; > + max-frequency = <200000000>; > + disable-wp; > + > + mmc-pwrseq = <&emmc_pwrseq>; > + vmmc-supply = <&vcc_3v3>; > + vqmmc-supply = <&flash_1v8>; > +}; > + > +&tdmif_b { > + status = "okay"; > +}; > + > +&tdmout_b { > + status = "okay"; > +}; > + > +&tohdmitx { > + status = "okay"; > +}; > + > +&uart_AO { > + status = "okay"; > + pinctrl-0 = <&uart_ao_a_pins>; > + pinctrl-names = "default"; > +}; > + > +&usb { > + status = "okay"; > + vbus-supply = <&usb_pwr_en>; > +}; > + > +&usb2_phy0 { > + phy-supply = <&vcc_5v>; > +}; > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts index eadd75e6e067..b2a4e823c1d8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts @@ -5,34 +5,12 @@ /dts-v1/; -#include "meson-sm1.dtsi" -#include <dt-bindings/gpio/meson-g12a-gpio.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> +#include "meson-sm1-odroid.dtsi" / { compatible = "hardkernel,odroid-c4", "amlogic,sm1"; model = "Hardkernel ODROID-C4"; - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - leds { compatible = "gpio-leds"; @@ -45,96 +23,6 @@ }; }; - tflash_vdd: regulator-tflash_vdd { - compatible = "regulator-fixed"; - - regulator-name = "TFLASH_VDD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; - enable-active-high; - regulator-always-on; - }; - - tf_io: gpio-regulator-tf_io { - compatible = "regulator-gpio"; - - regulator-name = "TF_IO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>; - gpios-states = <0>; - - states = <3300000 0>, - <1800000 1>; - }; - - flash_1v8: regulator-flash_1v8 { - compatible = "regulator-fixed"; - regulator-name = "FLASH_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - main_12v: regulator-main_12v { - compatible = "regulator-fixed"; - regulator-name = "12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&main_12v>; - }; - - vcc_1v8: regulator-vcc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - /* FIXME: actually controlled by VDDCPU_B_EN */ - }; - - vddcpu: regulator-vddcpu { - /* - * MP8756GD Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - vin-supply = <&main_12v>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - hub_5v: regulator-hub_5v { compatible = "regulator-fixed"; regulator-name = "HUB_5V"; @@ -147,215 +35,12 @@ enable-active-high; }; - usb_pwr_en: regulator-usb_pwr_en { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - /* Connected to the microUSB port power enable */ - gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vddao_1v8: regulator-vddao_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&main_12v>; - regulator-always-on; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - sound { - compatible = "amlogic,axg-sound-card"; model = "ODROID-C4"; - audio-aux-devs = <&tdmout_b>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* hdmi glue */ - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&arb { - status = "okay"; -}; - -&clkc_audio { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU1_CLK>; - clock-latency = <50000>; -}; - -&cpu2 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU2_CLK>; - clock-latency = <50000>; -}; - -&cpu3 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU3_CLK>; - clock-latency = <50000>; -}; - -&ext_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; }; }; -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - &gpio { - gpio-line-names = - /* GPIOZ */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - /* GPIOH */ - "", "", "", "", "", - "PIN_36", /* GPIOH_5 */ - "PIN_26", /* GPIOH_6 */ - "PIN_32", /* GPIOH_7 */ - "", - /* BOOT */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - /* GPIOC */ - "", "", "", "", "", "", "", "", - /* GPIOA */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", - "PIN_27", /* GPIOA_14 */ - "PIN_28", /* GPIOA_15 */ - /* GPIOX */ - "PIN_16", /* GPIOX_0 */ - "PIN_18", /* GPIOX_1 */ - "PIN_22", /* GPIOX_2 */ - "PIN_11", /* GPIOX_3 */ - "PIN_13", /* GPIOX_4 */ - "PIN_7", /* GPIOX_5 */ - "PIN_33", /* GPIOX_6 */ - "PIN_15", /* GPIOX_7 */ - "PIN_19", /* GPIOX_8 */ - "PIN_21", /* GPIOX_9 */ - "PIN_24", /* GPIOX_10 */ - "PIN_23", /* GPIOX_11 */ - "PIN_8", /* GPIOX_12 */ - "PIN_10", /* GPIOX_13 */ - "PIN_29", /* GPIOX_14 */ - "PIN_31", /* GPIOX_15 */ - "PIN_12", /* GPIOX_16 */ - "PIN_3", /* GPIOX_17 */ - "PIN_5", /* GPIOX_18 */ - "PIN_35"; /* GPIOX_19 */ - /* * WARNING: The USB Hub on the Odroid-C4 needs a reset signal * to be turned high in order to be detected by the USB Controller @@ -370,120 +55,10 @@ }; }; -&gpio_ao { - gpio-line-names = - /* GPIOAO */ - "", "", "", "", - "PIN_47", /* GPIOAO_4 */ - "", "", - "PIN_45", /* GPIOAO_7 */ - "PIN_46", /* GPIOAO_8 */ - "PIN_44", /* GPIOAO_9 */ - "PIN_42", /* GPIOAO_10 */ - "", - /* GPIOE */ - "", "", ""; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&vcc_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - &ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; linux,rc-map-name = "rc-odroid"; }; -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&saradc { - status = "okay"; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <200000000>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&tflash_vdd>; - vqmmc-supply = <&tf_io>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&flash_1v8>; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - vbus-supply = <&usb_pwr_en>; -}; - -&usb2_phy0 { - phy-supply = <&vcc_5v>; -}; - &usb2_phy1 { /* Enable the hub which is connected to this port */ phy-supply = <&hub_5v>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi new file mode 100644 index 000000000000..a66d55d93183 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi @@ -0,0 +1,441 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com> + */ + +#include "meson-sm1.dtsi" +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + tflash_vdd: regulator-tflash_vdd { + compatible = "regulator-fixed"; + + regulator-name = "TFLASH_VDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; + enable-active-high; + regulator-always-on; + }; + + tf_io: gpio-regulator-tf_io { + compatible = "regulator-gpio"; + + regulator-name = "TF_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0>, + <1800000 1>; + }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&main_12v>; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vddcpu: regulator-vddcpu { + /* + * MP8756GD Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + usb_pwr_en: regulator-usb_pwr_en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* Connected to the microUSB port power enable */ + gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU1_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU2_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU3_CLK>; + clock-latency = <50000>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&gpio { + gpio-line-names = + /* GPIOZ */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* GPIOH */ + "", "", "", "", "", + "PIN_36", /* GPIOH_5 */ + "PIN_26", /* GPIOH_6 */ + "PIN_32", /* GPIOH_7 */ + "", + /* BOOT */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* GPIOC */ + "", "", "", "", "", "", "", "", + /* GPIOA */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", + "PIN_27", /* GPIOA_14 */ + "PIN_28", /* GPIOA_15 */ + /* GPIOX */ + "PIN_16", /* GPIOX_0 */ + "PIN_18", /* GPIOX_1 */ + "PIN_22", /* GPIOX_2 */ + "PIN_11", /* GPIOX_3 */ + "PIN_13", /* GPIOX_4 */ + "PIN_7", /* GPIOX_5 */ + "PIN_33", /* GPIOX_6 */ + "PIN_15", /* GPIOX_7 */ + "PIN_19", /* GPIOX_8 */ + "PIN_21", /* GPIOX_9 */ + "PIN_24", /* GPIOX_10 */ + "PIN_23", /* GPIOX_11 */ + "PIN_8", /* GPIOX_12 */ + "PIN_10", /* GPIOX_13 */ + "PIN_29", /* GPIOX_14 */ + "PIN_31", /* GPIOX_15 */ + "PIN_12", /* GPIOX_16 */ + "PIN_3", /* GPIOX_17 */ + "PIN_5", /* GPIOX_18 */ + "PIN_35"; /* GPIOX_19 */ +}; + +&gpio_ao { + gpio-line-names = + /* GPIOAO */ + "", "", "", "", + "PIN_47", /* GPIOAO_4 */ + "", "", + "PIN_45", /* GPIOAO_7 */ + "PIN_46", /* GPIOAO_8 */ + "PIN_44", /* GPIOAO_9 */ + "PIN_42", /* GPIOAO_10 */ + "", + /* GPIOE */ + "", "", ""; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&saradc { + status = "okay"; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <200000000>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&tflash_vdd>; + vqmmc-supply = <&tf_io>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_pwr_en>; +}; + +&usb2_phy0 { + phy-supply = <&vcc_5v>; +};
Convert the ODRIOD-C4 dts to meson-sm1-odroid.dtsi and C4 board dts in preparation for adding additional C4 family boards. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> --- .../boot/dts/amlogic/meson-sm1-odroid-c4.dts | 427 +---------------- .../boot/dts/amlogic/meson-sm1-odroid.dtsi | 441 ++++++++++++++++++ 2 files changed, 442 insertions(+), 426 deletions(-) create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi