| Message ID | 20210308092241.17058-1-narmstrong@baylibre.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [stable,5.10] Revert "arm64: dts: amlogic: add missing ethernet reset ID" | expand |
On Mon, Mar 08, 2021 at 10:22:41AM +0100, Neil Armstrong wrote: > It has been reported on IRC and in KernelCI boot tests, this change breaks > internal PHY support on the Amlogic G12A/SM1 Based boards. > > We suspect the added signal to reset more than the Ethernet MAC but also > the MDIO/(RG)MII mux used to redirect the MAC signals to the internal PHY. > > This reverts commit f3362f0c18174a1f334a419ab7d567a36bd1b3f3 while we find > and acceptable solution to cleanly reset the Ethernet MAC. > > commit 19f6fe976a61f9afc289b062b7ef67f99b72e7b9 upstream. Now applied, thanks. greg k-h
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 724ee179b316..fae48efae83e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -227,8 +227,6 @@ ethmac: ethernet@ff3f0000 { "timing-adjustment"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; - resets = <&reset RESET_ETHERNET>; - reset-names = "stmmaceth"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index a6127002573b..959b299344e5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -224,8 +224,6 @@ ethmac: ethernet@ff3f0000 { "timing-adjustment"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; - resets = <&reset RESET_ETHERNET>; - reset-names = "stmmaceth"; status = "disabled"; mdio0: mdio { diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 726b91d3a905..0edd137151f8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -13,7 +13,6 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/meson-gxbb-power.h> -#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> #include <dt-bindings/thermal/thermal.h> / { @@ -576,8 +575,6 @@ ethmac: ethernet@c9410000 { interrupt-names = "macirq"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; - resets = <&reset RESET_ETHERNET>; - reset-names = "stmmaceth"; power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>; status = "disabled"; };