diff mbox series

[5/7] drm/meson: encoder_hdmi: switch to bridge DRM_BRIDGE_ATTACH_NO_CONNECTOR

Message ID 20211014152606.2289528-6-narmstrong@baylibre.com (mailing list archive)
State Superseded
Delegated to: Neil Armstrong
Headers show
Series drm/meson: rework encoders to pass ATTACH_NO_CONNECTOR | expand

Commit Message

Neil Armstrong Oct. 14, 2021, 3:26 p.m. UTC
This implements the necessary change to no more use the embedded
connector in dw-hdmi and use the dedicated bridge connector driver
by passing DRM_BRIDGE_ATTACH_NO_CONNECTOR to the bridge attach call.

The necessary connector properties are added to handle the same
functionalities as the embedded dw-hdmi connector, i.e. the HDR
metadata, the CEC notifier & other flags.

The dw-hdmi output_port is set to 1 in order to look for a connector
next bridge in order to get DRM_BRIDGE_ATTACH_NO_CONNECTOR working.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/gpu/drm/meson/Kconfig              |  2 +
 drivers/gpu/drm/meson/meson_dw_hdmi.c      |  1 +
 drivers/gpu/drm/meson/meson_encoder_hdmi.c | 81 +++++++++++++++++++++-
 3 files changed, 82 insertions(+), 2 deletions(-)

Comments

Sam Ravnborg Oct. 14, 2021, 6:19 p.m. UTC | #1
Hi Neil,

On Thu, Oct 14, 2021 at 05:26:04PM +0200, Neil Armstrong wrote:
> This implements the necessary change to no more use the embedded
> connector in dw-hdmi and use the dedicated bridge connector driver
> by passing DRM_BRIDGE_ATTACH_NO_CONNECTOR to the bridge attach call.
> 
> The necessary connector properties are added to handle the same
> functionalities as the embedded dw-hdmi connector, i.e. the HDR
> metadata, the CEC notifier & other flags.
> 
> The dw-hdmi output_port is set to 1 in order to look for a connector
> next bridge in order to get DRM_BRIDGE_ATTACH_NO_CONNECTOR working.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Look fine,
Acked-by: Sam Ravnborg <sam@ravnborg.org>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/meson/Kconfig b/drivers/gpu/drm/meson/Kconfig
index 9f9281dd49f8..a4e1ed96e5e8 100644
--- a/drivers/gpu/drm/meson/Kconfig
+++ b/drivers/gpu/drm/meson/Kconfig
@@ -6,9 +6,11 @@  config DRM_MESON
 	select DRM_KMS_HELPER
 	select DRM_KMS_CMA_HELPER
 	select DRM_GEM_CMA_HELPER
+	select DRM_DISPLAY_CONNECTOR
 	select VIDEOMODE_HELPERS
 	select REGMAP_MMIO
 	select MESON_CANVAS
+	select CEC_CORE if CEC_NOTIFIER
 
 config DRM_MESON_DW_HDMI
 	tristate "HDMI Synopsys Controller support for Amlogic Meson Display"
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index c2480b3335ac..933ff63b1ecf 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -805,6 +805,7 @@  static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
 	dw_plat_data->input_bus_encoding = V4L2_YCBCR_ENC_709;
 	dw_plat_data->ycbcr_420_allowed = true;
 	dw_plat_data->disable_cec = true;
+	dw_plat_data->output_port = 1;
 
 	if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
 	    dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxm-dw-hdmi") ||
diff --git a/drivers/gpu/drm/meson/meson_encoder_hdmi.c b/drivers/gpu/drm/meson/meson_encoder_hdmi.c
index c775a1ab5b1e..a4264587d89a 100644
--- a/drivers/gpu/drm/meson/meson_encoder_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_encoder_hdmi.c
@@ -14,9 +14,12 @@ 
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 
+#include <media/cec-notifier.h>
+
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_simple_kms_helper.h>
 #include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
 #include <drm/drm_device.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_probe_helper.h>
@@ -34,8 +37,10 @@  struct meson_encoder_hdmi {
 	struct drm_encoder encoder;
 	struct drm_bridge bridge;
 	struct drm_bridge *next_bridge;
+	struct drm_connector *connector;
 	struct meson_drm *priv;
 	unsigned long output_bus_fmt;
+	struct cec_notifier *cec_notifier;
 };
 
 #define bridge_to_meson_encoder_hdmi(x) \
@@ -50,6 +55,14 @@  static int meson_encoder_hdmi_attach(struct drm_bridge *bridge,
 				 &encoder_hdmi->bridge, flags);
 }
 
+static void meson_encoder_hdmi_detach(struct drm_bridge *bridge)
+{
+	struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
+
+	cec_notifier_conn_unregister(encoder_hdmi->cec_notifier);
+	encoder_hdmi->cec_notifier = NULL;
+}
+
 static void meson_encoder_hdmi_enable(struct drm_bridge *bridge)
 {
 	struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
@@ -284,12 +297,33 @@  static int meson_encoder_hdmi_atomic_check(struct drm_bridge *bridge,
 	return 0;
 }
 
+static void meson_encoder_hdmi_hpd_notify(struct drm_bridge *bridge,
+					  enum drm_connector_status status)
+{
+	struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
+	struct edid *edid;
+
+	if (!encoder_hdmi->cec_notifier)
+		return;
+
+	if (status == connector_status_connected) {
+		edid = drm_bridge_get_edid(encoder_hdmi->next_bridge, encoder_hdmi->connector);
+		if (!edid)
+			return;
+
+		cec_notifier_set_phys_addr_from_edid(encoder_hdmi->cec_notifier, edid);
+	} else
+		cec_notifier_phys_addr_invalidate(encoder_hdmi->cec_notifier);
+}
+
 static const struct drm_bridge_funcs meson_encoder_hdmi_bridge_funcs = {
 	.attach = meson_encoder_hdmi_attach,
+	.detach = meson_encoder_hdmi_detach,
 	.enable	= meson_encoder_hdmi_enable,
 	.disable = meson_encoder_hdmi_disable,
 	.mode_valid = meson_encoder_hdmi_mode_valid,
 	.mode_set = meson_encoder_hdmi_mode_set,
+	.hpd_notify = meson_encoder_hdmi_hpd_notify,
 	.atomic_get_input_bus_fmts = meson_encoder_hdmi_get_inp_bus_fmts,
 	.atomic_check = meson_encoder_hdmi_atomic_check,
 	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
@@ -300,6 +334,7 @@  static const struct drm_bridge_funcs meson_encoder_hdmi_bridge_funcs = {
 int meson_encoder_hdmi_init(struct meson_drm *priv)
 {
 	struct meson_encoder_hdmi *meson_encoder_hdmi;
+	struct platform_device *pdev;
 	struct device_node *remote;
 	int ret;
 
@@ -326,6 +361,7 @@  int meson_encoder_hdmi_init(struct meson_drm *priv)
 	meson_encoder_hdmi->bridge.funcs = &meson_encoder_hdmi_bridge_funcs;
 	meson_encoder_hdmi->bridge.of_node = priv->dev->of_node;
 	meson_encoder_hdmi->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
+	meson_encoder_hdmi->bridge.interlace_allowed = true;
 
 	drm_bridge_add(&meson_encoder_hdmi->bridge);
 
@@ -342,17 +378,58 @@  int meson_encoder_hdmi_init(struct meson_drm *priv)
 	meson_encoder_hdmi->encoder.possible_crtcs = BIT(0);
 
 	/* Attach HDMI Encoder Bridge to Encoder */
-	ret = drm_bridge_attach(&meson_encoder_hdmi->encoder, &meson_encoder_hdmi->bridge, NULL, 0);
+	ret = drm_bridge_attach(&meson_encoder_hdmi->encoder, &meson_encoder_hdmi->bridge, NULL,
+				DRM_BRIDGE_ATTACH_NO_CONNECTOR);
 	if (ret) {
 		dev_err(priv->dev, "Failed to attach bridge: %d\n", ret);
 		return ret;
 	}
 
+	/* Initialize & attach Bridge Connector */
+	meson_encoder_hdmi->connector = drm_bridge_connector_init(priv->drm,
+							&meson_encoder_hdmi->encoder);
+	if (IS_ERR(meson_encoder_hdmi->connector)) {
+		dev_err(priv->dev, "Unable to create HDMI bridge connector\n");
+		return PTR_ERR(meson_encoder_hdmi->connector);
+	}
+	drm_connector_attach_encoder(meson_encoder_hdmi->connector,
+				     &meson_encoder_hdmi->encoder);
+
 	/*
 	 * We should have now in place:
-	 * encoder->[hdmi encoder bridge]->[dw-hdmi bridge]->[dw-hdmi connector]
+	 * encoder->[hdmi encoder bridge]->[dw-hdmi bridge]->[display connector bridge]->[display connector]
 	 */
 
+	/*
+	 * drm_connector_attach_max_bpc_property() requires the
+	 * connector to have a state.
+	 */
+	drm_atomic_helper_connector_reset(meson_encoder_hdmi->connector);
+
+	if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXL) ||
+	    meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM) ||
+	    meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A))
+		drm_connector_attach_hdr_output_metadata_property(meson_encoder_hdmi->connector);
+
+	drm_connector_attach_max_bpc_property(meson_encoder_hdmi->connector, 8, 8);
+
+	/* Handle this here until handled by drm_bridge_connector_init() */
+	meson_encoder_hdmi->connector->ycbcr_420_allowed = true;
+
+	pdev = of_find_device_by_node(remote);
+	if (pdev) {
+		struct cec_connector_info conn_info;
+		struct cec_notifier *notifier;
+
+		cec_fill_conn_info_from_drm(&conn_info, meson_encoder_hdmi->connector);
+
+		notifier = cec_notifier_conn_register(&pdev->dev, NULL, &conn_info);
+		if (!notifier)
+			return -ENOMEM;
+
+		meson_encoder_hdmi->cec_notifier = notifier;
+	}
+
 	DRM_DEBUG_DRIVER("HDMI encoder initialized\n");
 
 	return 0;