tty: serial: meson: Fixed an issue where pclk was turned on on probe but should be turned off on subsequent errors.

Commit Message

Yu Tu March 1, 2022, 5:37 a.m. UTC

Call clk_prepare_enable in the probe function to enable pclk. If you
exit the probe function later in an error, call clk_disable_unprepare
to disable pclk.

Fixes: 44023b8e1f14 ("tty: serial:meson: Describes the calculation of the UART baud rate clock using a clock frame“)
Reported-by: kernel test robot <[e-mail]>
Reported-by: Dan Carpenter <[e-mail]>
Signed-off-by: Yu Tu <[e-mail]>
---
 drivers/tty/serial/meson_uart.c | 37 +++++++++++++++++++++++----------
 1 file changed, 26 insertions(+), 11 deletions(-)


base-commit: d4ab5487cc77a4053dc9070c5761ad94bf397825

Patch

diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index bf6be5468aaf..972f210f3492 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -780,28 +780,37 @@  static int meson_uart_probe(struct platform_device *pdev)
 		return ret;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		return irq;
+	if (irq < 0) {
+		ret = irq;
+		goto err_out_clk_disable;
+	}
 
 	of_property_read_u32(pdev->dev.of_node, "fifo-size", &fifosize);
 
 	if (meson_ports[pdev->id]) {
 		dev_err(&pdev->dev, "port %d already allocated\n", pdev->id);
-		return -EBUSY;
+		ret = -EBUSY;
+		goto err_out_clk_disable;
 	}
 
 	port = devm_kzalloc(&pdev->dev, sizeof(struct uart_port), GFP_KERNEL);
-	if (!port)
-		return -ENOMEM;
+	if (!port) {
+		ret = -ENOMEM;
+		goto err_out_clk_disable;
+	}
 
 	port->membase = devm_ioremap_resource(&pdev->dev, res_mem);
-	if (IS_ERR(port->membase))
-		return PTR_ERR(port->membase);
+	if (IS_ERR(port->membase)) {
+		ret = PTR_ERR(port->membase);
+		goto err_out_clk_disable;
+	}
 
 	private_data = devm_kzalloc(&pdev->dev, sizeof(*private_data),
 				    GFP_KERNEL);
-	if (!private_data)
-		return -ENOMEM;
+	if (!private_data) {
+		ret = -ENOMEM;
+		goto err_out_clk_disable;
+	}
 
 	if (device_get_match_data(&pdev->dev))
 		private_data->use_xtal_clk = true;
@@ -822,7 +831,7 @@  static int meson_uart_probe(struct platform_device *pdev)
 
 	ret = meson_uart_probe_clocks(port);
 	if (ret)
-		return ret;
+		goto err_out_clk_disable;
 
 	meson_ports[pdev->id] = port;
 	platform_set_drvdata(pdev, port);
@@ -831,9 +840,15 @@  static int meson_uart_probe(struct platform_device *pdev)
 	meson_uart_reset(port);
 
 	ret = uart_add_one_port(&meson_uart_driver, port);
-	if (ret)
+	if (ret) {
 		meson_ports[pdev->id] = NULL;
+		goto err_out_clk_disable;
+	}
+
+	return 0;
 
+err_out_clk_disable:
+	clk_disable_unprepare(pclk);
 	return ret;
 }