| Message ID | 20220603100004.70336-2-andriy.shevchenko@linux.intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v3,1/6] iio: adc: meson_saradc: Don't attach managed resource to IIO device object | expand |
On Fri, 3 Jun 2022 13:00:00 +0300 Andy Shevchenko <andriy.shevchenko@linux.intel.com> wrote: > Align messages to be printed with the physical device prefix as it's done > everywhere else in this driver. > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Here I'm fine with the use of the parent as can only happen after all the setup is done, so it's obvious the parent will be assigned (some might argue it is obvious in the previous patch, but I had to check as I couldn't remember when we set it :) Anyhow, LGTM. > --- > v3: new patch (inspired by previous change) > drivers/iio/adc/meson_saradc.c | 7 +++---- > 1 file changed, 3 insertions(+), 4 deletions(-) > > diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c > index 4fe6b997cd03..658047370db0 100644 > --- a/drivers/iio/adc/meson_saradc.c > +++ b/drivers/iio/adc/meson_saradc.c > @@ -345,6 +345,7 @@ static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev, > int *val) > { > struct meson_sar_adc_priv *priv = iio_priv(indio_dev); > + struct device *dev = indio_dev->dev.parent; > int regval, fifo_chan, fifo_val, count; > > if (!wait_for_completion_timeout(&priv->done, > @@ -353,16 +354,14 @@ static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev, > > count = meson_sar_adc_get_fifo_count(indio_dev); > if (count != 1) { > - dev_err(&indio_dev->dev, > - "ADC FIFO has %d element(s) instead of one\n", count); > + dev_err(dev, "ADC FIFO has %d element(s) instead of one\n", count); > return -EINVAL; > } > > regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, ®val); > fifo_chan = FIELD_GET(MESON_SAR_ADC_FIFO_RD_CHAN_ID_MASK, regval); > if (fifo_chan != chan->address) { > - dev_err(&indio_dev->dev, > - "ADC FIFO entry belongs to channel %d instead of %lu\n", > + dev_err(dev, "ADC FIFO entry belongs to channel %d instead of %lu\n", > fifo_chan, chan->address); > return -EINVAL; > }
On Fri, Jun 03, 2022 at 05:21:17PM +0100, Jonathan Cameron wrote: > On Fri, 3 Jun 2022 13:00:00 +0300 > Andy Shevchenko <andriy.shevchenko@linux.intel.com> wrote: > > > Align messages to be printed with the physical device prefix as it's done > > everywhere else in this driver. > Here I'm fine with the use of the parent as can only happen after all > the setup is done, so it's obvious the parent will be assigned > (some might argue it is obvious in the previous patch, but I had to check > as I couldn't remember when we set it :) > > Anyhow, LGTM. Thanks! > > v3: new patch (inspired by previous change)
On Fri, Jun 3, 2022 at 12:00 PM Andy Shevchenko <andriy.shevchenko@linux.intel.com> wrote: > > Align messages to be printed with the physical device prefix as it's done > everywhere else in this driver. > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c index 4fe6b997cd03..658047370db0 100644 --- a/drivers/iio/adc/meson_saradc.c +++ b/drivers/iio/adc/meson_saradc.c @@ -345,6 +345,7 @@ static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev, int *val) { struct meson_sar_adc_priv *priv = iio_priv(indio_dev); + struct device *dev = indio_dev->dev.parent; int regval, fifo_chan, fifo_val, count; if (!wait_for_completion_timeout(&priv->done, @@ -353,16 +354,14 @@ static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev, count = meson_sar_adc_get_fifo_count(indio_dev); if (count != 1) { - dev_err(&indio_dev->dev, - "ADC FIFO has %d element(s) instead of one\n", count); + dev_err(dev, "ADC FIFO has %d element(s) instead of one\n", count); return -EINVAL; } regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, ®val); fifo_chan = FIELD_GET(MESON_SAR_ADC_FIFO_RD_CHAN_ID_MASK, regval); if (fifo_chan != chan->address) { - dev_err(&indio_dev->dev, - "ADC FIFO entry belongs to channel %d instead of %lu\n", + dev_err(dev, "ADC FIFO entry belongs to channel %d instead of %lu\n", fifo_chan, chan->address); return -EINVAL; }
Align messages to be printed with the physical device prefix as it's done everywhere else in this driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- v3: new patch (inspired by previous change) drivers/iio/adc/meson_saradc.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)