| Message ID | 20221117-b4-amlogic-bindings-convert-v1-4-3f025599b968@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | dt-bindings: first batch of dt-schema conversions for Amlogic Meson bindings | expand |
On Fri, 18 Nov 2022 15:33:30 +0100, Neil Armstrong wrote: > Convert the Amlogic Meson6 SoCs Watchdog timer bindings to dt-schema. > > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > --- > .../bindings/watchdog/amlogic,meson6-wdt.yaml | 39 ++++++++++++++++++++++ > .../devicetree/bindings/watchdog/meson-wdt.txt | 21 ------------ > 2 files changed, 39 insertions(+), 21 deletions(-) > Running 'make dtbs_check' with the schema in this patch gives the following warnings. Consider if they are expected or the schema is incorrect. These may not be new warnings. Note that it is not yet a requirement to have 0 warnings for dtbs_check. This will change in the future. Full log is available here: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221117-b4-amlogic-bindings-convert-v1-4-3f025599b968@linaro.org watchdog@9900: compatible: ['amlogic,meson8m2-wdt', 'amlogic,meson8b-wdt'] is too long arch/arm/boot/dts/meson8m2-mxiii-plus.dtb watchdog@9900: Unevaluated properties are not allowed ('compatible', 'interrupts' were unexpected) arch/arm/boot/dts/meson8m2-mxiii-plus.dtb watchdog@9900: Unevaluated properties are not allowed ('interrupts' was unexpected) arch/arm/boot/dts/meson6-atv1200.dtb arch/arm/boot/dts/meson8b-ec100.dtb arch/arm/boot/dts/meson8b-mxq.dtb arch/arm/boot/dts/meson8b-odroidc1.dtb arch/arm/boot/dts/meson8-minix-neo-x8.dtb
Hi Neil, On Fri, Nov 18, 2022 at 3:33 PM Neil Armstrong <neil.armstrong@linaro.org> wrote: [...] > +unevaluatedProperties: false Could you please also add an "interrupts" property? This watchdog IP can generate an interrupt instead of resetting the SoC. We don't support this in the driver yet, but still it's w Somehow the interrupt made it into the .dtsi but not the bindings. [...] > -- compatible : depending on the SoC this should be one of: > - "amlogic,meson6-wdt" on Meson6 SoCs > - "amlogic,meson8-wdt" and "amlogic,meson6-wdt" on Meson8 SoCs > - "amlogic,meson8b-wdt" on Meson8b SoCs > - "amlogic,meson8m2-wdt" and "amlogic,meson8b-wdt" on Meson8m2 SoCs The last part did not quite make it into the new schema. arch/arm/boot/dts/meson8m2.dtsi currently has: compatible = "amlogic,meson8m2-wdt", "amlogic,meson8b-wdt"; Best regards, Martin
diff --git a/Documentation/devicetree/bindings/watchdog/amlogic,meson6-wdt.yaml b/Documentation/devicetree/bindings/watchdog/amlogic,meson6-wdt.yaml new file mode 100644 index 000000000000..4e33a5a9c23c --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/amlogic,meson6-wdt.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/amlogic,meson6-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson6 SoCs Watchdog timer + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + - Martin Blumenstingl <martin.blumenstingl@googlemail.com> + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + enum: + - amlogic,meson6-wdt + - amlogic,meson8-wdt + - amlogic,meson8b-wdt + - amlogic,meson8m2-wdt + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + wdt: watchdog@c1109900 { + compatible = "amlogic,meson6-wdt"; + reg = <0xc1109900 0x8>; + timeout-sec = <10>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt deleted file mode 100644 index 7588cc3971bf..000000000000 --- a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt +++ /dev/null @@ -1,21 +0,0 @@ -Meson SoCs Watchdog timer - -Required properties: - -- compatible : depending on the SoC this should be one of: - "amlogic,meson6-wdt" on Meson6 SoCs - "amlogic,meson8-wdt" and "amlogic,meson6-wdt" on Meson8 SoCs - "amlogic,meson8b-wdt" on Meson8b SoCs - "amlogic,meson8m2-wdt" and "amlogic,meson8b-wdt" on Meson8m2 SoCs -- reg : Specifies base physical address and size of the registers. - -Optional properties: -- timeout-sec: contains the watchdog timeout in seconds. - -Example: - -wdt: watchdog@c1109900 { - compatible = "amlogic,meson6-wdt"; - reg = <0xc1109900 0x8>; - timeout-sec = <10>; -};
Convert the Amlogic Meson6 SoCs Watchdog timer bindings to dt-schema. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- .../bindings/watchdog/amlogic,meson6-wdt.yaml | 39 ++++++++++++++++++++++ .../devicetree/bindings/watchdog/meson-wdt.txt | 21 ------------ 2 files changed, 39 insertions(+), 21 deletions(-)