diff mbox series

[v1,05/17] thermal/hwmon: Use the right device for devm_thermal_add_hwmon_sysfs()

Message ID 20230219143657.241542-6-daniel.lezcano@linaro.org (mailing list archive)
State New, archived
Headers show
Series None | expand

Commit Message

Daniel Lezcano Feb. 19, 2023, 2:36 p.m. UTC
The devres variant of thermal_add_hwmon_sysfs() only takes the thermal
zone structure pointer as parameter.

Actually, it uses the tz->device to add it in the devres list.

It is preferable to use the device registering the thermal zone
instead of the thermal zone device itself. That prevents the driver
accessing the thermal zone structure internals and it is from my POV
more correct regarding how devm_ is used.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/amlogic_thermal.c                  | 2 +-
 drivers/thermal/imx8mm_thermal.c                   | 2 +-
 drivers/thermal/imx_sc_thermal.c                   | 2 +-
 drivers/thermal/k3_bandgap.c                       | 2 +-
 drivers/thermal/mediatek/auxadc_thermal.c          | 2 +-
 drivers/thermal/qcom/qcom-spmi-adc-tm5.c           | 2 +-
 drivers/thermal/qcom/qcom-spmi-temp-alarm.c        | 2 +-
 drivers/thermal/qcom/tsens.c                       | 2 +-
 drivers/thermal/qoriq_thermal.c                    | 2 +-
 drivers/thermal/sun8i_thermal.c                    | 2 +-
 drivers/thermal/tegra/tegra30-tsensor.c            | 2 +-
 drivers/thermal/thermal_hwmon.c                    | 4 ++--
 drivers/thermal/thermal_hwmon.h                    | 4 ++--
 drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 2 +-
 14 files changed, 16 insertions(+), 16 deletions(-)

Comments

Martin Blumenstingl Feb. 19, 2023, 5:26 p.m. UTC | #1
On Sun, Feb 19, 2023 at 3:38 PM Daniel Lezcano
<daniel.lezcano@linaro.org> wrote:
>
> The devres variant of thermal_add_hwmon_sysfs() only takes the thermal
> zone structure pointer as parameter.
>
> Actually, it uses the tz->device to add it in the devres list.
>
> It is preferable to use the device registering the thermal zone
> instead of the thermal zone device itself. That prevents the driver
> accessing the thermal zone structure internals and it is from my POV
> more correct regarding how devm_ is used.
>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---
>  drivers/thermal/amlogic_thermal.c                  | 2 +-
For amlogic_thermal.c:
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
diff mbox series

Patch

diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
index 9235fda4ec1e..337153042318 100644
--- a/drivers/thermal/amlogic_thermal.c
+++ b/drivers/thermal/amlogic_thermal.c
@@ -285,7 +285,7 @@  static int amlogic_thermal_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	if (devm_thermal_add_hwmon_sysfs(pdata->tzd))
+	if (devm_thermal_add_hwmon_sysfs(&pdev->dev, pdata->tzd))
 		dev_warn(&pdev->dev, "Failed to add hwmon sysfs attributes\n");
 
 	ret = amlogic_thermal_initialize(pdata);
diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c
index 750240f4fa32..e0830dcec4a0 100644
--- a/drivers/thermal/imx8mm_thermal.c
+++ b/drivers/thermal/imx8mm_thermal.c
@@ -343,7 +343,7 @@  static int imx8mm_tmu_probe(struct platform_device *pdev)
 		}
 		tmu->sensors[i].hw_id = i;
 
-		if (devm_thermal_add_hwmon_sysfs(tmu->sensors[i].tzd))
+		if (devm_thermal_add_hwmon_sysfs(&pdev->dev, tmu->sensors[i].tzd))
 			dev_warn(&pdev->dev, "failed to add hwmon sysfs attributes\n");
 	}
 
diff --git a/drivers/thermal/imx_sc_thermal.c b/drivers/thermal/imx_sc_thermal.c
index 26102d1c6bde..631bda2401eb 100644
--- a/drivers/thermal/imx_sc_thermal.c
+++ b/drivers/thermal/imx_sc_thermal.c
@@ -116,7 +116,7 @@  static int imx_sc_thermal_probe(struct platform_device *pdev)
 			return ret;
 		}
 
-		if (devm_thermal_add_hwmon_sysfs(sensor->tzd))
+		if (devm_thermal_add_hwmon_sysfs(&pdev->dev, sensor->tzd))
 			dev_warn(&pdev->dev, "failed to add hwmon sysfs attributes\n");
 	}
 
diff --git a/drivers/thermal/k3_bandgap.c b/drivers/thermal/k3_bandgap.c
index 8cbd7361b492..ee059997d00d 100644
--- a/drivers/thermal/k3_bandgap.c
+++ b/drivers/thermal/k3_bandgap.c
@@ -222,7 +222,7 @@  static int k3_bandgap_probe(struct platform_device *pdev)
 			goto err_alloc;
 		}
 
-		if (devm_thermal_add_hwmon_sysfs(data[id].tzd))
+		if (devm_thermal_add_hwmon_sysfs(dev, data[id].tzd))
 			dev_warn(dev, "Failed to add hwmon sysfs attributes\n");
 	}
 
diff --git a/drivers/thermal/mediatek/auxadc_thermal.c b/drivers/thermal/mediatek/auxadc_thermal.c
index d7bf725d224b..d4b8246d4991 100644
--- a/drivers/thermal/mediatek/auxadc_thermal.c
+++ b/drivers/thermal/mediatek/auxadc_thermal.c
@@ -1210,7 +1210,7 @@  static int mtk_thermal_probe(struct platform_device *pdev)
 		goto err_disable_clk_peri_therm;
 	}
 
-	ret = devm_thermal_add_hwmon_sysfs(tzdev);
+	ret = devm_thermal_add_hwmon_sysfs(&pdev->dev, tzdev);
 	if (ret)
 		dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs");
 
diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
index b0269daf128a..e3c8c9dc93e2 100644
--- a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
+++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
@@ -689,7 +689,7 @@  static int adc_tm5_register_tzd(struct adc_tm5_chip *adc_tm)
 			return PTR_ERR(tzd);
 		}
 		adc_tm->channels[i].tzd = tzd;
-		if (devm_thermal_add_hwmon_sysfs(tzd))
+		if (devm_thermal_add_hwmon_sysfs(adc_tm->dev, tzd))
 			dev_warn(adc_tm->dev,
 				 "Failed to add hwmon sysfs attributes\n");
 	}
diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
index c817b03deb00..f82e0051d30e 100644
--- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
+++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
@@ -459,7 +459,7 @@  static int qpnp_tm_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	if (devm_thermal_add_hwmon_sysfs(chip->tz_dev))
+	if (devm_thermal_add_hwmon_sysfs(&pdev->dev, chip->tz_dev))
 		dev_warn(&pdev->dev,
 			 "Failed to add hwmon sysfs attributes\n");
 
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 8020ead2794e..49c1fdca36dd 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -1189,7 +1189,7 @@  static int tsens_register(struct tsens_priv *priv)
 		if (priv->ops->enable)
 			priv->ops->enable(priv, i);
 
-		if (devm_thermal_add_hwmon_sysfs(tzd))
+		if (devm_thermal_add_hwmon_sysfs(priv->dev, tzd))
 			dev_warn(priv->dev,
 				 "Failed to add hwmon sysfs attributes\n");
 	}
diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 8b6fe0c9ade2..e6f244d18c59 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -157,7 +157,7 @@  static int qoriq_tmu_register_tmu_zone(struct device *dev,
 			return ret;
 		}
 
-		if (devm_thermal_add_hwmon_sysfs(tzd))
+		if (devm_thermal_add_hwmon_sysfs(dev, tzd))
 			dev_warn(dev,
 				 "Failed to add hwmon sysfs attributes\n");
 
diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index 085b7b0b7c72..ec4aa60dd1fb 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -475,7 +475,7 @@  static int sun8i_ths_register(struct ths_device *tmdev)
 		if (IS_ERR(tmdev->sensor[i].tzd))
 			return PTR_ERR(tmdev->sensor[i].tzd);
 
-		if (devm_thermal_add_hwmon_sysfs(tmdev->sensor[i].tzd))
+		if (devm_thermal_add_hwmon_sysfs(tmdev->dev, tmdev->sensor[i].tzd))
 			dev_warn(tmdev->dev,
 				 "Failed to add hwmon sysfs attributes\n");
 	}
diff --git a/drivers/thermal/tegra/tegra30-tsensor.c b/drivers/thermal/tegra/tegra30-tsensor.c
index 537413acc6d2..ceb5b1b338a9 100644
--- a/drivers/thermal/tegra/tegra30-tsensor.c
+++ b/drivers/thermal/tegra/tegra30-tsensor.c
@@ -528,7 +528,7 @@  static int tegra_tsensor_register_channel(struct tegra_tsensor *ts,
 		return 0;
 	}
 
-	if (devm_thermal_add_hwmon_sysfs(tsc->tzd))
+	if (devm_thermal_add_hwmon_sysfs(ts->dev, tsc->tzd))
 		dev_warn(ts->dev, "failed to add hwmon sysfs attributes\n");
 
 	return 0;
diff --git a/drivers/thermal/thermal_hwmon.c b/drivers/thermal/thermal_hwmon.c
index c594c42bea6d..964db7941e31 100644
--- a/drivers/thermal/thermal_hwmon.c
+++ b/drivers/thermal/thermal_hwmon.c
@@ -263,7 +263,7 @@  static void devm_thermal_hwmon_release(struct device *dev, void *res)
 	thermal_remove_hwmon_sysfs(*(struct thermal_zone_device **)res);
 }
 
-int devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
+int devm_thermal_add_hwmon_sysfs(struct device *dev, struct thermal_zone_device *tz)
 {
 	struct thermal_zone_device **ptr;
 	int ret;
@@ -280,7 +280,7 @@  int devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 	}
 
 	*ptr = tz;
-	devres_add(&tz->device, ptr);
+	devres_add(dev, ptr);
 
 	return ret;
 }
diff --git a/drivers/thermal/thermal_hwmon.h b/drivers/thermal/thermal_hwmon.h
index 1a9d65f6a6a8..b429f6e7abdb 100644
--- a/drivers/thermal/thermal_hwmon.h
+++ b/drivers/thermal/thermal_hwmon.h
@@ -17,7 +17,7 @@ 
 
 #ifdef CONFIG_THERMAL_HWMON
 int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz);
-int devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz);
+int devm_thermal_add_hwmon_sysfs(struct device *dev, struct thermal_zone_device *tz);
 void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz);
 #else
 static inline int
@@ -27,7 +27,7 @@  thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 }
 
 static inline int
-devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
+devm_thermal_add_hwmon_sysfs(struct device *dev, struct thermal_zone_device *tz)
 {
 	return 0;
 }
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 7f6b71d11eed..9fb1ca5e39f6 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -182,7 +182,7 @@  int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
 	ti_bandgap_set_sensor_data(bgp, id, data);
 	ti_bandgap_write_update_interval(bgp, data->sensor_id, interval);
 
-	if (devm_thermal_add_hwmon_sysfs(data->ti_thermal))
+	if (devm_thermal_add_hwmon_sysfs(bgp->dev, data->ti_thermal))
 		dev_warn(bgp->dev, "failed to add hwmon sysfs attributes\n");
 
 	return 0;