diff mbox series

[31/33] doc: boards: amlogic: add documentation for BananaPi M5

Message ID 20230320114609.930145-32-christianshewitt@gmail.com (mailing list archive)
State New, archived
Headers show
Series doc: board: amlogic: spring clean-up of Amlogic docs | expand

Commit Message

Christian Hewitt March 20, 2023, 11:46 a.m. UTC
Add missing build documentation for the BPI-M5 board.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
 doc/board/amlogic/bananapi-m5.rst | 141 ++++++++++++++++++++++++++++++
 doc/board/amlogic/index.rst       |   1 +
 2 files changed, 142 insertions(+)
 create mode 100644 doc/board/amlogic/bananapi-m5.rst
diff mbox series

Patch

diff --git a/doc/board/amlogic/bananapi-m5.rst b/doc/board/amlogic/bananapi-m5.rst
new file mode 100644
index 0000000000..ddc14b4eef
--- /dev/null
+++ b/doc/board/amlogic/bananapi-m5.rst
@@ -0,0 +1,141 @@ 
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for BananaPi BPI-M5 (S905X3)
+===================================
+
+BananaPi BPI-M5 is a Single Board Computer manufactured by Sinovoip with the following
+specification:
+
+ - Amlogic S905X3 Arm Cortex-A55 quad-core SoC
+ - 4GB DDR4 SDRAM
+ - 16GB eMMC
+ - Gigabit Ethernet
+ - HDMI 2.1 display
+ - 40-pin GPIO header
+ - 4x USB 3.0 Host
+ - 1x USB-C (power)
+ - microSD
+ - UART serial
+ - Infrared receiver
+
+Schematics are available from the manufacturer: https://wiki.banana-pi.org/Banana_Pi_BPI-M5
+
+U-Boot Compilation
+------------------
+
+.. code-block:: bash
+
+    $ export CROSS_COMPILE=aarch64-none-elf-
+    $ make bananapi-m5_defconfig
+    $ make
+
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
+
+.. code-block:: bash
+    $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+    $ cd amlogic-boot-fip
+    $ mkdir my-output-dir
+    $ ./build-fip.sh bananapi-m5 /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
+
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
+
+.. code-block:: bash
+
+    $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+    $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+    $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+    $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+    $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
+
+    $ DIR=bananapi-m5
+    $ git clone --depth 1 https://github.com/Dangku/amlogic-u-boot.git -b odroidg12-v2015.01-c4-m5 $DIR
+
+    $ cd $DIR
+    $ make bananapi_m5_defconfig
+    $ make
+    $ export UBOOTDIR=$PWD
+
+Go back to the mainline U-Boot source tree then:
+
+.. code-block:: bash
+
+    $ mkdir fip
+
+    $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh
+    $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/
+    $ cp $UBOOTDIR/build/board/bananapi/bananpi_m5/firmware/acs.bin fip/
+    $ cp $UBOOTDIR/fip/g12a/bl2.bin fip/
+    $ cp $UBOOTDIR/fip/g12a/bl30.bin fip/
+    $ cp $UBOOTDIR/fip/g12a/bl31.img fip/
+    $ cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/
+    $ cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/
+    $ cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/
+    $ cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/
+    $ cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/
+    $ cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/
+    $ cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/
+    $ cp $UBOOTDIR/fip/g12a/piei.fw fip/
+    $ cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/
+    $ cp u-boot.bin fip/bl33.bin
+
+    $ sh fip/blx_fix.sh \
+         fip/bl30.bin \
+         fip/zero_tmp \
+         fip/bl30_zero.bin \
+         fip/bl301.bin \
+         fip/bl301_zero.bin \
+         fip/bl30_new.bin \
+         bl30
+
+    $ sh fip/blx_fix.sh \
+         fip/bl2.bin \
+         fip/zero_tmp \
+         fip/bl2_zero.bin \
+         fip/acs.bin \
+         fip/bl21_zero.bin \
+         fip/bl2_new.bin \
+         bl2
+
+    $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \
+                                          --output fip/bl30_new.bin.g12a.enc \
+                                          --level v3
+    $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \
+                                          --output fip/bl30_new.bin.enc \
+                                          --level v3 --type bl30
+    $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \
+                                          --output fip/bl31.img.enc \
+                                          --level v3 --type bl31
+    $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \
+                                          --output fip/bl33.bin.enc \
+                                          --level v3 --type bl33 --compress lz4
+    $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \
+                                          --output fip/bl2.n.bin.sig
+    $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \
+                                          --output fip/u-boot.bin \
+                                          --bl2 fip/bl2.n.bin.sig \
+                                          --bl30 fip/bl30_new.bin.enc \
+                                          --bl31 fip/bl31.img.enc \
+                                          --bl33 fip/bl33.bin.enc \
+                                          --ddrfw1 fip/ddr4_1d.fw \
+                                          --ddrfw2 fip/ddr4_2d.fw \
+                                          --ddrfw3 fip/ddr3_1d.fw \
+                                          --ddrfw4 fip/piei.fw \
+                                          --ddrfw5 fip/lpddr4_1d.fw \
+                                          --ddrfw6 fip/lpddr4_2d.fw \
+                                          --ddrfw7 fip/diag_lpddr4.fw \
+                                          --ddrfw8 fip/aml_ddr.fw \
+                                          --ddrfw9 fip/lpddr3_1d.fw \
+                                          --level v3
+
+Then write the image to SD or eMMC with:
+
+.. code-block:: bash
+
+    $ DEV=/dev/boot_device
+    $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+    $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst
index e3ed1158df..808c857622 100644
--- a/doc/board/amlogic/index.rst
+++ b/doc/board/amlogic/index.rst
@@ -86,6 +86,7 @@  Board Documentation
    :maxdepth: 1
 
    bananapi-cm4io
+   bananapi-m5
    beelink-gtking
    beelink-gtkingpro
    jethub-j80