diff mbox series

[08/33] doc: boards: amlogic: update documentation for Khadas VIM

Message ID 20230320114609.930145-9-christianshewitt@gmail.com (mailing list archive)
State New, archived
Headers show
Series doc: board: amlogic: spring clean-up of Amlogic docs | expand

Commit Message

Christian Hewitt March 20, 2023, 11:45 a.m. UTC
Improve documentation.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
 doc/board/amlogic/khadas-vim.rst | 76 +++++++++++++++++---------------
 1 file changed, 41 insertions(+), 35 deletions(-)
diff mbox series

Patch

diff --git a/doc/board/amlogic/khadas-vim.rst b/doc/board/amlogic/khadas-vim.rst
index 04025d737c..f1fbe1a8a6 100644
--- a/doc/board/amlogic/khadas-vim.rst
+++ b/doc/board/amlogic/khadas-vim.rst
@@ -1,24 +1,24 @@ 
 .. SPDX-License-Identifier: GPL-2.0+
 
-U-Boot for Khadas VIM
-======================
+U-Boot for Khadas VIM (S905X)
+=============================
 
-Khadas VIM is an Open Source DIY Box manufactured by Shenzhen Wesion
-Technology Co., Ltd with the following specifications:
+Khadas VIM is a Single Board Computer manufactured by Shenzhen Wesion Technology Co. Ltd
+with the following specifications:
 
  - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz
  - ARM Mali 450 GPU
  - 2GB DDR3 SDRAM
+ - 8GB/16GB eMMC
  - 10/100 Ethernet
  - HDMI 2.0 4K/60Hz display
  - 40-pin GPIO header
  - 2 x USB 2.0 Host, 1 x USB 2.0 Type-C OTG
- - 8GB/16GBeMMC
  - microSD
  - SDIO Wifi Module, Bluetooth
- - Two channels IR receiver
+ - Two channel IR receiver
 
-U-Boot compilation
+U-Boot Compilation
 ------------------
 
 .. code-block:: bash
@@ -27,14 +27,20 @@  U-Boot compilation
     $ make khadas-vim_defconfig
     $ make
 
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
 
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `khadas-vim`
+.. code-block:: bash
+    $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+    $ cd amlogic-boot-fip
+    $ mkdir my-output-dir
+    $ ./build-fip.sh khadas-vim /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
 
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
 
 .. code-block:: bash
 
@@ -64,40 +70,40 @@  Go back to mainline U-Boot source tree then :
     $ cp u-boot.bin fip/bl33.bin
 
     $ $FIPDIR/blx_fix.sh \
-    	fip/bl30.bin \
-    	fip/zero_tmp \
-    	fip/bl30_zero.bin \
-    	fip/bl301.bin \
-    	fip/bl301_zero.bin \
-    	fip/bl30_new.bin \
-    	bl30
+              fip/bl30.bin \
+              fip/zero_tmp \
+              fip/bl30_zero.bin \
+              fip/bl301.bin \
+              fip/bl301_zero.bin \
+              fip/bl30_new.bin \
+              bl30
 
     $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
 
     $ $FIPDIR/blx_fix.sh \
-    	fip/bl2_acs.bin \
-    	fip/zero_tmp \
-    	fip/bl2_zero.bin \
-    	fip/bl21.bin \
-    	fip/bl21_zero.bin \
-    	fip/bl2_new.bin \
-    	bl2
+              fip/bl2_acs.bin \
+              fip/zero_tmp \
+              fip/bl2_zero.bin \
+              fip/bl21.bin \
+              fip/bl21_zero.bin \
+              fip/bl2_new.bin \
+              bl2
 
     $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
     $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
     $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
     $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
     $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \
-    		--output fip/u-boot.bin \
-    		--bl2 fip/bl2.n.bin.sig \
-    		--bl30 fip/bl30_new.bin.enc \
-    		--bl31 fip/bl31.img.enc \
-    		--bl33 fip/bl33.bin.enc
+                                  --output fip/u-boot.bin \
+                                  --bl2 fip/bl2.n.bin.sig \
+                                  --bl30 fip/bl30_new.bin.enc \
+                                  --bl31 fip/bl31.img.enc \
+                                  --bl33 fip/bl33.bin.enc
 
-and then write the image to SD with:
+Then write U-Boot to SD or eMMC with:
 
 .. code-block:: bash
 
-    $ DEV=/dev/your_sd_device
+    $ DEV=/dev/boot_device
     $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
-    $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+    $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440