diff mbox series

[V3] arm64: dts: add support for C3 based Amlogic AW409

Message ID 20230505071254.2571429-1-xianwei.zhao@amlogic.com (mailing list archive)
State Superseded
Headers show
Series [V3] arm64: dts: add support for C3 based Amlogic AW409 | expand

Commit Message

Xianwei Zhao May 5, 2023, 7:12 a.m. UTC
Amlogic C3 is an advanced edge AI processor designed for smart IP camera
applications.

Add basic support for the C3 based Amlogic AW409 board, which describes
the following components: CPU, GIC, IRQ, Timer, UART. It's capable of
booting up into the serial console.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/all/20230407102704.1055152-1-kelvin.zhang@amlogic.com
Link: https://lore.kernel.org/all/20230307222651.2106615-2-martin.blumenstingl@googlemail.com
---
v2 -> V3: Remove '256m' from filename;
          Keep alphabetical order of Makefile.
V1 -> V2: Remove new arch, and use ARCH_MESON;
          Modify node name, and delete superfluous blank line.
---
 arch/arm64/boot/dts/amlogic/Makefile          |  1 +
 .../dts/amlogic/amlogic-c3-c302x-aw409.dts    | 29 +++++++
 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi   | 86 +++++++++++++++++++
 3 files changed, 116 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi


base-commit: ae68fb187b59bc8645974320808ab2d7c41b1833

Comments

Neil Armstrong May 5, 2023, 9:05 a.m. UTC | #1
On 05/05/2023 09:12, Xianwei Zhao wrote:
> Amlogic C3 is an advanced edge AI processor designed for smart IP camera
> applications.
> 
> Add basic support for the C3 based Amlogic AW409 board, which describes
> the following components: CPU, GIC, IRQ, Timer, UART. It's capable of
> booting up into the serial console.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> Link: https://lore.kernel.org/all/20230407102704.1055152-1-kelvin.zhang@amlogic.com
> Link: https://lore.kernel.org/all/20230307222651.2106615-2-martin.blumenstingl@googlemail.com

What are those links ? If they are dependencies, please add them under the --- before the changelog.

Thanks,
Neil

> ---
> v2 -> V3: Remove '256m' from filename;
>            Keep alphabetical order of Makefile.
> V1 -> V2: Remove new arch, and use ARCH_MESON;
>            Modify node name, and delete superfluous blank line.
> ---
>   arch/arm64/boot/dts/amlogic/Makefile          |  1 +
>   .../dts/amlogic/amlogic-c3-c302x-aw409.dts    | 29 +++++++
>   arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi   | 86 +++++++++++++++++++
>   3 files changed, 116 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
>   create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index cd1c5b04890a..6f61798a109f 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -1,4 +1,5 @@
>   # SPDX-License-Identifier: GPL-2.0
> +dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
> new file mode 100644
> index 000000000000..edce8850b338
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
> @@ -0,0 +1,29 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "amlogic-c3.dtsi"
> +
> +/ {
> +	model = "Amlogic C302 aw409 Development Board";
> +	compatible = "amlogic,aw409", "amlogic,c3";
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	aliases {
> +		serial0 = &uart_b;
> +	};
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x0 0x0 0x0 0x10000000>;
> +	};
> +};
> +
> +&uart_b {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> new file mode 100644
> index 000000000000..93b335aef605
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> @@ -0,0 +1,86 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35";
> +			reg = <0x0 0x1>;
> +			enable-method = "psci";
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	xtal: xtal-clk {
> +		compatible = "fixed-clock";
> +		clock-frequency = <24000000>;
> +		clock-output-names = "xtal";
> +		#clock-cells = <0>;
> +	};
> +
> +	soc {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		gic: interrupt-controller@fff01000 {
> +			compatible = "arm,gic-400";
> +			#interrupt-cells = <3>;
> +			#address-cells = <0>;
> +			interrupt-controller;
> +			reg = <0x0 0xfff01000 0 0x1000>,
> +			      <0x0 0xfff02000 0 0x2000>,
> +			      <0x0 0xfff04000 0 0x2000>,
> +			      <0x0 0xfff06000 0 0x2000>;
> +			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> +		};
> +
> +		apb4: bus@fe000000 {
> +			compatible = "simple-bus";
> +			reg = <0x0 0xfe000000 0x0 0x480000>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
> +
> +			uart_b: serial@7a000 {
> +				compatible = "amlogic,meson-g12a-uart";
> +				reg = <0x0 0x7a000 0x0 0x18>;
> +				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
> +				status = "disabled";
> +				clocks = <&xtal>, <&xtal>, <&xtal>;
> +				clock-names = "xtal", "pclk", "baud";
> +			};
> +
> +		};
> +	};
> +};
> 
> base-commit: ae68fb187b59bc8645974320808ab2d7c41b1833
Xianwei Zhao May 5, 2023, 9:11 a.m. UTC | #2
On 2023/5/5 17:05, Neil Armstrong wrote:
> [ EXTERNAL EMAIL ]
> 
> On 05/05/2023 09:12, Xianwei Zhao wrote:
>> Amlogic C3 is an advanced edge AI processor designed for smart IP camera
>> applications.
>>
>> Add basic support for the C3 based Amlogic AW409 board, which describes
>> the following components: CPU, GIC, IRQ, Timer, UART. It's capable of
>> booting up into the serial console.
>>
>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>> Link: 
>> https://lore.kernel.org/all/20230407102704.1055152-1-kelvin.zhang@amlogic.com
>> Link: 
>> https://lore.kernel.org/all/20230307222651.2106615-2-martin.blumenstingl@googlemail.com
> 
> What are those links ? If they are dependencies, please add them under 
> the --- before the changelog.
>
Will do, thanks.
> Thanks,
> Neil
> 
>> ---
>> v2 -> V3: Remove '256m' from filename;
>>            Keep alphabetical order of Makefile.
>> V1 -> V2: Remove new arch, and use ARCH_MESON;
>>            Modify node name, and delete superfluous blank line.
>> ---
>>   arch/arm64/boot/dts/amlogic/Makefile          |  1 +
>>   .../dts/amlogic/amlogic-c3-c302x-aw409.dts    | 29 +++++++
>>   arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi   | 86 +++++++++++++++++++
>>   3 files changed, 116 insertions(+)
>>   create mode 100644 
>> arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
>>   create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile 
>> b/arch/arm64/boot/dts/amlogic/Makefile
>> index cd1c5b04890a..6f61798a109f 100644
>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>> @@ -1,4 +1,5 @@
>>   # SPDX-License-Identifier: GPL-2.0
>> +dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts 
>> b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
>> new file mode 100644
>> index 000000000000..edce8850b338
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
>> @@ -0,0 +1,29 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "amlogic-c3.dtsi"
>> +
>> +/ {
>> +     model = "Amlogic C302 aw409 Development Board";
>> +     compatible = "amlogic,aw409", "amlogic,c3";
>> +     interrupt-parent = <&gic>;
>> +     #address-cells = <2>;
>> +     #size-cells = <2>;
>> +
>> +     aliases {
>> +             serial0 = &uart_b;
>> +     };
>> +
>> +     memory@0 {
>> +             device_type = "memory";
>> +             reg = <0x0 0x0 0x0 0x10000000>;
>> +     };
>> +};
>> +
>> +&uart_b {
>> +     status = "okay";
>> +};
>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi 
>> b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>> new file mode 100644
>> index 000000000000..93b335aef605
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>> @@ -0,0 +1,86 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +
>> +/ {
>> +     cpus {
>> +             #address-cells = <2>;
>> +             #size-cells = <0>;
>> +
>> +             cpu0: cpu@0 {
>> +                     device_type = "cpu";
>> +                     compatible = "arm,cortex-a35";
>> +                     reg = <0x0 0x0>;
>> +                     enable-method = "psci";
>> +             };
>> +
>> +             cpu1: cpu@1 {
>> +                     device_type = "cpu";
>> +                     compatible = "arm,cortex-a35";
>> +                     reg = <0x0 0x1>;
>> +                     enable-method = "psci";
>> +             };
>> +     };
>> +
>> +     timer {
>> +             compatible = "arm,armv8-timer";
>> +             interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | 
>> IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | 
>> IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | 
>> IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | 
>> IRQ_TYPE_LEVEL_LOW)>;
>> +     };
>> +
>> +     psci {
>> +             compatible = "arm,psci-1.0";
>> +             method = "smc";
>> +     };
>> +
>> +     xtal: xtal-clk {
>> +             compatible = "fixed-clock";
>> +             clock-frequency = <24000000>;
>> +             clock-output-names = "xtal";
>> +             #clock-cells = <0>;
>> +     };
>> +
>> +     soc {
>> +             compatible = "simple-bus";
>> +             #address-cells = <2>;
>> +             #size-cells = <2>;
>> +             ranges;
>> +
>> +             gic: interrupt-controller@fff01000 {
>> +                     compatible = "arm,gic-400";
>> +                     #interrupt-cells = <3>;
>> +                     #address-cells = <0>;
>> +                     interrupt-controller;
>> +                     reg = <0x0 0xfff01000 0 0x1000>,
>> +                           <0x0 0xfff02000 0 0x2000>,
>> +                           <0x0 0xfff04000 0 0x2000>,
>> +                           <0x0 0xfff06000 0 0x2000>;
>> +                     interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) 
>> | IRQ_TYPE_LEVEL_HIGH)>;
>> +             };
>> +
>> +             apb4: bus@fe000000 {
>> +                     compatible = "simple-bus";
>> +                     reg = <0x0 0xfe000000 0x0 0x480000>;
>> +                     #address-cells = <2>;
>> +                     #size-cells = <2>;
>> +                     ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
>> +
>> +                     uart_b: serial@7a000 {
>> +                             compatible = "amlogic,meson-g12a-uart";
>> +                             reg = <0x0 0x7a000 0x0 0x18>;
>> +                             interrupts = <GIC_SPI 169 
>> IRQ_TYPE_EDGE_RISING>;
>> +                             status = "disabled";
>> +                             clocks = <&xtal>, <&xtal>, <&xtal>;
>> +                             clock-names = "xtal", "pclk", "baud";
>> +                     };
>> +
>> +             };
>> +     };
>> +};
>>
>> base-commit: ae68fb187b59bc8645974320808ab2d7c41b1833
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index cd1c5b04890a..6f61798a109f 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -1,4 +1,5 @@ 
 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
new file mode 100644
index 000000000000..edce8850b338
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
@@ -0,0 +1,29 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-c3.dtsi"
+
+/ {
+	model = "Amlogic C302 aw409 Development Board";
+	compatible = "amlogic,aw409", "amlogic,c3";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x10000000>;
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
new file mode 100644
index 000000000000..93b335aef605
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -0,0 +1,86 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x2000>,
+			      <0x0 0xfff04000 0 0x2000>,
+			      <0x0 0xfff06000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apb4: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,meson-g12a-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+			};
+
+		};
+	};
+};