| Message ID | 20230703093142.2028500-4-xianwei.zhao@amlogic.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Power: C3: add power domain driver | expand |
On 03/07/2023 11:31, =Xianwei Zhao wrote: > From: Xianwei Zhao <xianwei.zhao@amlogic.com> > > Enable power domain controller for Amlogic C3 SoC > > Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com> > --- > arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi > index 60ad4f3eef9d..826c51b1aff6 100644 > --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi > +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi > @@ -47,6 +47,16 @@ xtal: xtal-clk { > #clock-cells = <0>; > }; > > + sm: secure-monitor { > + compatible = "amlogic,meson-gxbb-sm"; > + > + pwrc: power-controller { > + compatible = "amlogic,c3-pwrc"; > + #power-domain-cells = <1>; > + status = "okay"; Why do you need it? okay is by default. Best regards, Krzysztof
Hi Krzysztof,
Thanks for your reply.
On 2023/7/3 21:12, Krzysztof Kozlowski wrote:
> [ EXTERNAL EMAIL ]
>
> On 03/07/2023 11:31, =Xianwei Zhao wrote:
>> From: Xianwei Zhao <xianwei.zhao@amlogic.com>
>>
>> Enable power domain controller for Amlogic C3 SoC
>>
>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>> ---
>> arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 10 ++++++++++
>> 1 file changed, 10 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>> index 60ad4f3eef9d..826c51b1aff6 100644
>> --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>> @@ -47,6 +47,16 @@ xtal: xtal-clk {
>> #clock-cells = <0>;
>> };
>>
>> + sm: secure-monitor {
>> + compatible = "amlogic,meson-gxbb-sm";
>> +
>> + pwrc: power-controller {
>> + compatible = "amlogic,c3-pwrc";
>> + #power-domain-cells = <1>;
>> + status = "okay";
>
> Why do you need it? okay is by default.Will move "status" in next version.
>
> Best regards,
> Krzysztof
>
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi index 60ad4f3eef9d..826c51b1aff6 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi @@ -47,6 +47,16 @@ xtal: xtal-clk { #clock-cells = <0>; }; + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + + pwrc: power-controller { + compatible = "amlogic,c3-pwrc"; + #power-domain-cells = <1>; + status = "okay"; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>;