diff mbox series

[V2,5/6] soc: amlogic: Add support for T7 power domains controller

Message ID 20230824055930.2576849-6-xianwei.zhao@amlogic.com (mailing list archive)
State Superseded
Headers show
Series Power: T7: add power domain driver | expand

Commit Message

Xianwei Zhao Aug. 24, 2023, 5:59 a.m. UTC 
From: "xianwei.zhao" <xianwei.zhao@amlogic.com>

Add support for T7 power controller. T7 power control
registers are in secure domain, and should be accessed by SMC.

Signed-off-by: xianwei.zhao <xianwei.zhao@amlogic.com>
---
V1 -> V2: Modify T7_NIC flag  "ALWAYS_ON"
---
 drivers/genpd/amlogic/meson-secure-pwrc.c | 73 +++++++++++++++++++++++
 1 file changed, 73 insertions(+)

Comments

Neil Armstrong Aug. 24, 2023, 8:30 a.m. UTC | #1 
On 24/08/2023 07:59, Xianwei Zhao wrote:
> From: "xianwei.zhao" <xianwei.zhao@amlogic.com>
> 
> Add support for T7 power controller. T7 power control
> registers are in secure domain, and should be accessed by SMC.
> 
> Signed-off-by: xianwei.zhao <xianwei.zhao@amlogic.com>
> ---
> V1 -> V2: Modify T7_NIC flag  "ALWAYS_ON"
> ---
>   drivers/genpd/amlogic/meson-secure-pwrc.c | 73 +++++++++++++++++++++++
>   1 file changed, 73 insertions(+)
> 
> diff --git a/drivers/genpd/amlogic/meson-secure-pwrc.c b/drivers/genpd/amlogic/meson-secure-pwrc.c
> index 3e7e3bd25d1f..2233f6cb7e71 100644
> --- a/drivers/genpd/amlogic/meson-secure-pwrc.c
> +++ b/drivers/genpd/amlogic/meson-secure-pwrc.c
> @@ -13,6 +13,7 @@
>   #include <dt-bindings/power/meson-a1-power.h>
>   #include <dt-bindings/power/amlogic,c3-pwrc.h>
>   #include <dt-bindings/power/meson-s4-power.h>
> +#include <dt-bindings/power/amlogic,t7-pwrc.h>
>   #include <linux/arm-smccc.h>
>   #include <linux/firmware/meson/meson_sm.h>
>   #include <linux/module.h>
> @@ -164,6 +165,69 @@ static struct meson_secure_pwrc_domain_desc s4_pwrc_domains[] = {
>   	SEC_PD(S4_AUDIO,	0),
>   };
>   
> +static struct meson_secure_pwrc_domain_desc t7_pwrc_domains[] = {
> +	SEC_PD(T7_DSPA,		0),
> +	SEC_PD(T7_DSPB,		0),
> +	TOP_PD(T7_DOS_HCODEC,	0, PWRC_T7_NIC3_ID),
> +	TOP_PD(T7_DOS_HEVC,	0, PWRC_T7_NIC3_ID),
> +	TOP_PD(T7_DOS_VDEC,	0, PWRC_T7_NIC3_ID),
> +	TOP_PD(T7_DOS_WAVE,	0, PWRC_T7_NIC3_ID),
> +	SEC_PD(T7_VPU_HDMI,	0),
> +	SEC_PD(T7_USB_COMB,	0),
> +	SEC_PD(T7_PCIE,		0),
> +	TOP_PD(T7_GE2D,		0, PWRC_T7_NIC3_ID),
> +	/* SRAMA is used as ATF runtime memory, and should be always on */
> +	SEC_PD(T7_SRAMA,	GENPD_FLAG_ALWAYS_ON),
> +	/* SRAMB is used as ATF runtime memory, and should be always on */
> +	SEC_PD(T7_SRAMB,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(T7_HDMIRX,	0),
> +	SEC_PD(T7_VI_CLK1,	0),
> +	SEC_PD(T7_VI_CLK2,	0),
> +	/* ETH is for ethernet online wakeup, and should be always on */
> +	SEC_PD(T7_ETH,		GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(T7_ISP,		0),
> +	SEC_PD(T7_MIPI_ISP,	0),
> +	TOP_PD(T7_GDC,		0, PWRC_T7_NIC3_ID),
> +	TOP_PD(T7_DEWARP,	0, PWRC_T7_NIC3_ID),
> +	SEC_PD(T7_SDIO_A,	0),
> +	SEC_PD(T7_SDIO_B,	0),
> +	SEC_PD(T7_EMMC,		0),
> +	TOP_PD(T7_MALI_SC0,	0, PWRC_T7_NNA_TOP_ID),
> +	TOP_PD(T7_MALI_SC1,	0, PWRC_T7_NNA_TOP_ID),
> +	TOP_PD(T7_MALI_SC2,	0, PWRC_T7_NNA_TOP_ID),
> +	TOP_PD(T7_MALI_SC3,	0, PWRC_T7_NNA_TOP_ID),
> +	SEC_PD(T7_MALI_TOP,	0),
> +	TOP_PD(T7_NNA_CORE0,	0, PWRC_T7_NNA_TOP_ID),
> +	TOP_PD(T7_NNA_CORE1,	0, PWRC_T7_NNA_TOP_ID),
> +	TOP_PD(T7_NNA_CORE2,	0, PWRC_T7_NNA_TOP_ID),
> +	TOP_PD(T7_NNA_CORE3,	0, PWRC_T7_NNA_TOP_ID),
> +	SEC_PD(T7_NNA_TOP,	0),
> +	SEC_PD(T7_DDR0,		GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(T7_DDR1,		GENPD_FLAG_ALWAYS_ON),
> +	/* DMC0 is for DDR PHY ana/dig and DMC, and should be always on */
> +	SEC_PD(T7_DMC0,		GENPD_FLAG_ALWAYS_ON),
> +	/* DMC1 is for DDR PHY ana/dig and DMC, and should be always on */
> +	SEC_PD(T7_DMC1,		GENPD_FLAG_ALWAYS_ON),
> +	/* NOC is related to clk bus, and should be always on */
> +	SEC_PD(T7_NOC,		GENPD_FLAG_ALWAYS_ON),
> +	/* NIC is for the Arm NIC-400 interconnect, and should be always on */
> +	SEC_PD(T7_NIC2,		GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(T7_NIC3,		0),
> +	/* CPU accesses the interleave data to the ddr need cci, and should be always on */
> +	SEC_PD(T7_CCI,		GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(T7_MIPI_DSI0,	0),
> +	SEC_PD(T7_SPICC0,	0),
> +	SEC_PD(T7_SPICC1,	0),
> +	SEC_PD(T7_SPICC2,	0),
> +	SEC_PD(T7_SPICC3,	0),
> +	SEC_PD(T7_SPICC4,	0),
> +	SEC_PD(T7_SPICC5,	0),
> +	SEC_PD(T7_EDP0,		0),
> +	SEC_PD(T7_EDP1,		0),
> +	SEC_PD(T7_MIPI_DSI1,	0),
> +	SEC_PD(T7_AUDIO,	0),
> +};
> +
>   static int meson_secure_pwrc_probe(struct platform_device *pdev)
>   {
>   	int i;
> @@ -257,6 +321,11 @@ static struct meson_secure_pwrc_domain_data meson_secure_s4_pwrc_data = {
>   	.count = ARRAY_SIZE(s4_pwrc_domains),
>   };
>   
> +static struct meson_secure_pwrc_domain_data amlogic_secure_t7_pwrc_data = {
> +	.domains = t7_pwrc_domains,
> +	.count = ARRAY_SIZE(t7_pwrc_domains),
> +};
> +
>   static const struct of_device_id meson_secure_pwrc_match_table[] = {
>   	{
>   		.compatible = "amlogic,meson-a1-pwrc",
> @@ -270,6 +339,10 @@ static const struct of_device_id meson_secure_pwrc_match_table[] = {
>   		.compatible = "amlogic,meson-s4-pwrc",
>   		.data = &meson_secure_s4_pwrc_data,
>   	},
> +	{
> +		.compatible = "amlogic,t7-pwrc",
> +		.data = &amlogic_secure_t7_pwrc_data,
> +	},
>   	{ /* sentinel */ }
>   };
>   MODULE_DEVICE_TABLE(of, meson_secure_pwrc_match_table);

With updated subject:

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Xianwei Zhao Aug. 24, 2023, 8:49 a.m. UTC | #2 
Hi Neil,
     Thanks for your reply.

On 2023/8/24 16:30, Neil Armstrong wrote:
> [ EXTERNAL EMAIL ]
> 
> On 24/08/2023 07:59, Xianwei Zhao wrote:
>> From: "xianwei.zhao" <xianwei.zhao@amlogic.com>
>>
>> Add support for T7 power controller. T7 power control
>> registers are in secure domain, and should be accessed by SMC.
>>
>> Signed-off-by: xianwei.zhao <xianwei.zhao@amlogic.com>
>> ---
>> V1 -> V2: Modify T7_NIC flag  "ALWAYS_ON"
>> ---
>>   drivers/genpd/amlogic/meson-secure-pwrc.c | 73 +++++++++++++++++++++++
>>   1 file changed, 73 insertions(+)
>>
>> diff --git a/drivers/genpd/amlogic/meson-secure-pwrc.c 
>> b/drivers/genpd/amlogic/meson-secure-pwrc.c
>> index 3e7e3bd25d1f..2233f6cb7e71 100644
>> --- a/drivers/genpd/amlogic/meson-secure-pwrc.c
>> +++ b/drivers/genpd/amlogic/meson-secure-pwrc.c
>> @@ -13,6 +13,7 @@
>>   #include <dt-bindings/power/meson-a1-power.h>
>>   #include <dt-bindings/power/amlogic,c3-pwrc.h>
>>   #include <dt-bindings/power/meson-s4-power.h>
>> +#include <dt-bindings/power/amlogic,t7-pwrc.h>
>>   #include <linux/arm-smccc.h>
>>   #include <linux/firmware/meson/meson_sm.h>
>>   #include <linux/module.h>
>> @@ -164,6 +165,69 @@ static struct meson_secure_pwrc_domain_desc 
>> s4_pwrc_domains[] = {
>>       SEC_PD(S4_AUDIO,        0),
>>   };
>>
>> +static struct meson_secure_pwrc_domain_desc t7_pwrc_domains[] = {
>> +     SEC_PD(T7_DSPA,         0),
>> +     SEC_PD(T7_DSPB,         0),
>> +     TOP_PD(T7_DOS_HCODEC,   0, PWRC_T7_NIC3_ID),
>> +     TOP_PD(T7_DOS_HEVC,     0, PWRC_T7_NIC3_ID),
>> +     TOP_PD(T7_DOS_VDEC,     0, PWRC_T7_NIC3_ID),
>> +     TOP_PD(T7_DOS_WAVE,     0, PWRC_T7_NIC3_ID),
>> +     SEC_PD(T7_VPU_HDMI,     0),
>> +     SEC_PD(T7_USB_COMB,     0),
>> +     SEC_PD(T7_PCIE,         0),
>> +     TOP_PD(T7_GE2D,         0, PWRC_T7_NIC3_ID),
>> +     /* SRAMA is used as ATF runtime memory, and should be always on */
>> +     SEC_PD(T7_SRAMA,        GENPD_FLAG_ALWAYS_ON),
>> +     /* SRAMB is used as ATF runtime memory, and should be always on */
>> +     SEC_PD(T7_SRAMB,        GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(T7_HDMIRX,       0),
>> +     SEC_PD(T7_VI_CLK1,      0),
>> +     SEC_PD(T7_VI_CLK2,      0),
>> +     /* ETH is for ethernet online wakeup, and should be always on */
>> +     SEC_PD(T7_ETH,          GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(T7_ISP,          0),
>> +     SEC_PD(T7_MIPI_ISP,     0),
>> +     TOP_PD(T7_GDC,          0, PWRC_T7_NIC3_ID),
>> +     TOP_PD(T7_DEWARP,       0, PWRC_T7_NIC3_ID),
>> +     SEC_PD(T7_SDIO_A,       0),
>> +     SEC_PD(T7_SDIO_B,       0),
>> +     SEC_PD(T7_EMMC,         0),
>> +     TOP_PD(T7_MALI_SC0,     0, PWRC_T7_NNA_TOP_ID),
>> +     TOP_PD(T7_MALI_SC1,     0, PWRC_T7_NNA_TOP_ID),
>> +     TOP_PD(T7_MALI_SC2,     0, PWRC_T7_NNA_TOP_ID),
>> +     TOP_PD(T7_MALI_SC3,     0, PWRC_T7_NNA_TOP_ID),
>> +     SEC_PD(T7_MALI_TOP,     0),
>> +     TOP_PD(T7_NNA_CORE0,    0, PWRC_T7_NNA_TOP_ID),
>> +     TOP_PD(T7_NNA_CORE1,    0, PWRC_T7_NNA_TOP_ID),
>> +     TOP_PD(T7_NNA_CORE2,    0, PWRC_T7_NNA_TOP_ID),
>> +     TOP_PD(T7_NNA_CORE3,    0, PWRC_T7_NNA_TOP_ID),
>> +     SEC_PD(T7_NNA_TOP,      0),
>> +     SEC_PD(T7_DDR0,         GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(T7_DDR1,         GENPD_FLAG_ALWAYS_ON),
>> +     /* DMC0 is for DDR PHY ana/dig and DMC, and should be always on */
>> +     SEC_PD(T7_DMC0,         GENPD_FLAG_ALWAYS_ON),
>> +     /* DMC1 is for DDR PHY ana/dig and DMC, and should be always on */
>> +     SEC_PD(T7_DMC1,         GENPD_FLAG_ALWAYS_ON),
>> +     /* NOC is related to clk bus, and should be always on */
>> +     SEC_PD(T7_NOC,          GENPD_FLAG_ALWAYS_ON),
>> +     /* NIC is for the Arm NIC-400 interconnect, and should be always 
>> on */
>> +     SEC_PD(T7_NIC2,         GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(T7_NIC3,         0),
>> +     /* CPU accesses the interleave data to the ddr need cci, and 
>> should be always on */
>> +     SEC_PD(T7_CCI,          GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(T7_MIPI_DSI0,    0),
>> +     SEC_PD(T7_SPICC0,       0),
>> +     SEC_PD(T7_SPICC1,       0),
>> +     SEC_PD(T7_SPICC2,       0),
>> +     SEC_PD(T7_SPICC3,       0),
>> +     SEC_PD(T7_SPICC4,       0),
>> +     SEC_PD(T7_SPICC5,       0),
>> +     SEC_PD(T7_EDP0,         0),
>> +     SEC_PD(T7_EDP1,         0),
>> +     SEC_PD(T7_MIPI_DSI1,    0),
>> +     SEC_PD(T7_AUDIO,        0),
>> +};
>> +
>>   static int meson_secure_pwrc_probe(struct platform_device *pdev)
>>   {
>>       int i;
>> @@ -257,6 +321,11 @@ static struct meson_secure_pwrc_domain_data 
>> meson_secure_s4_pwrc_data = {
>>       .count = ARRAY_SIZE(s4_pwrc_domains),
>>   };
>>
>> +static struct meson_secure_pwrc_domain_data 
>> amlogic_secure_t7_pwrc_data = {
>> +     .domains = t7_pwrc_domains,
>> +     .count = ARRAY_SIZE(t7_pwrc_domains),
>> +};
>> +
>>   static const struct of_device_id meson_secure_pwrc_match_table[] = {
>>       {
>>               .compatible = "amlogic,meson-a1-pwrc",
>> @@ -270,6 +339,10 @@ static const struct of_device_id 
>> meson_secure_pwrc_match_table[] = {
>>               .compatible = "amlogic,meson-s4-pwrc",
>>               .data = &meson_secure_s4_pwrc_data,
>>       },
>> +     {
>> +             .compatible = "amlogic,t7-pwrc",
>> +             .data = &amlogic_secure_t7_pwrc_data,
>> +     },
>>       { /* sentinel */ }
>>   };
>>   MODULE_DEVICE_TABLE(of, meson_secure_pwrc_match_table);
> 
> With updated subject:
Will do.
> 
> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
diff mbox series

Patch

diff --git a/drivers/genpd/amlogic/meson-secure-pwrc.c b/drivers/genpd/amlogic/meson-secure-pwrc.c
index 3e7e3bd25d1f..2233f6cb7e71 100644
--- a/drivers/genpd/amlogic/meson-secure-pwrc.c
+++ b/drivers/genpd/amlogic/meson-secure-pwrc.c
@@ -13,6 +13,7 @@ 
 #include <dt-bindings/power/meson-a1-power.h>
 #include <dt-bindings/power/amlogic,c3-pwrc.h>
 #include <dt-bindings/power/meson-s4-power.h>
+#include <dt-bindings/power/amlogic,t7-pwrc.h>
 #include <linux/arm-smccc.h>
 #include <linux/firmware/meson/meson_sm.h>
 #include <linux/module.h>
@@ -164,6 +165,69 @@  static struct meson_secure_pwrc_domain_desc s4_pwrc_domains[] = {
 	SEC_PD(S4_AUDIO,	0),
 };
 
+static struct meson_secure_pwrc_domain_desc t7_pwrc_domains[] = {
+	SEC_PD(T7_DSPA,		0),
+	SEC_PD(T7_DSPB,		0),
+	TOP_PD(T7_DOS_HCODEC,	0, PWRC_T7_NIC3_ID),
+	TOP_PD(T7_DOS_HEVC,	0, PWRC_T7_NIC3_ID),
+	TOP_PD(T7_DOS_VDEC,	0, PWRC_T7_NIC3_ID),
+	TOP_PD(T7_DOS_WAVE,	0, PWRC_T7_NIC3_ID),
+	SEC_PD(T7_VPU_HDMI,	0),
+	SEC_PD(T7_USB_COMB,	0),
+	SEC_PD(T7_PCIE,		0),
+	TOP_PD(T7_GE2D,		0, PWRC_T7_NIC3_ID),
+	/* SRAMA is used as ATF runtime memory, and should be always on */
+	SEC_PD(T7_SRAMA,	GENPD_FLAG_ALWAYS_ON),
+	/* SRAMB is used as ATF runtime memory, and should be always on */
+	SEC_PD(T7_SRAMB,	GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(T7_HDMIRX,	0),
+	SEC_PD(T7_VI_CLK1,	0),
+	SEC_PD(T7_VI_CLK2,	0),
+	/* ETH is for ethernet online wakeup, and should be always on */
+	SEC_PD(T7_ETH,		GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(T7_ISP,		0),
+	SEC_PD(T7_MIPI_ISP,	0),
+	TOP_PD(T7_GDC,		0, PWRC_T7_NIC3_ID),
+	TOP_PD(T7_DEWARP,	0, PWRC_T7_NIC3_ID),
+	SEC_PD(T7_SDIO_A,	0),
+	SEC_PD(T7_SDIO_B,	0),
+	SEC_PD(T7_EMMC,		0),
+	TOP_PD(T7_MALI_SC0,	0, PWRC_T7_NNA_TOP_ID),
+	TOP_PD(T7_MALI_SC1,	0, PWRC_T7_NNA_TOP_ID),
+	TOP_PD(T7_MALI_SC2,	0, PWRC_T7_NNA_TOP_ID),
+	TOP_PD(T7_MALI_SC3,	0, PWRC_T7_NNA_TOP_ID),
+	SEC_PD(T7_MALI_TOP,	0),
+	TOP_PD(T7_NNA_CORE0,	0, PWRC_T7_NNA_TOP_ID),
+	TOP_PD(T7_NNA_CORE1,	0, PWRC_T7_NNA_TOP_ID),
+	TOP_PD(T7_NNA_CORE2,	0, PWRC_T7_NNA_TOP_ID),
+	TOP_PD(T7_NNA_CORE3,	0, PWRC_T7_NNA_TOP_ID),
+	SEC_PD(T7_NNA_TOP,	0),
+	SEC_PD(T7_DDR0,		GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(T7_DDR1,		GENPD_FLAG_ALWAYS_ON),
+	/* DMC0 is for DDR PHY ana/dig and DMC, and should be always on */
+	SEC_PD(T7_DMC0,		GENPD_FLAG_ALWAYS_ON),
+	/* DMC1 is for DDR PHY ana/dig and DMC, and should be always on */
+	SEC_PD(T7_DMC1,		GENPD_FLAG_ALWAYS_ON),
+	/* NOC is related to clk bus, and should be always on */
+	SEC_PD(T7_NOC,		GENPD_FLAG_ALWAYS_ON),
+	/* NIC is for the Arm NIC-400 interconnect, and should be always on */
+	SEC_PD(T7_NIC2,		GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(T7_NIC3,		0),
+	/* CPU accesses the interleave data to the ddr need cci, and should be always on */
+	SEC_PD(T7_CCI,		GENPD_FLAG_ALWAYS_ON),
+	SEC_PD(T7_MIPI_DSI0,	0),
+	SEC_PD(T7_SPICC0,	0),
+	SEC_PD(T7_SPICC1,	0),
+	SEC_PD(T7_SPICC2,	0),
+	SEC_PD(T7_SPICC3,	0),
+	SEC_PD(T7_SPICC4,	0),
+	SEC_PD(T7_SPICC5,	0),
+	SEC_PD(T7_EDP0,		0),
+	SEC_PD(T7_EDP1,		0),
+	SEC_PD(T7_MIPI_DSI1,	0),
+	SEC_PD(T7_AUDIO,	0),
+};
+
 static int meson_secure_pwrc_probe(struct platform_device *pdev)
 {
 	int i;
@@ -257,6 +321,11 @@  static struct meson_secure_pwrc_domain_data meson_secure_s4_pwrc_data = {
 	.count = ARRAY_SIZE(s4_pwrc_domains),
 };
 
+static struct meson_secure_pwrc_domain_data amlogic_secure_t7_pwrc_data = {
+	.domains = t7_pwrc_domains,
+	.count = ARRAY_SIZE(t7_pwrc_domains),
+};
+
 static const struct of_device_id meson_secure_pwrc_match_table[] = {
 	{
 		.compatible = "amlogic,meson-a1-pwrc",
@@ -270,6 +339,10 @@  static const struct of_device_id meson_secure_pwrc_match_table[] = {
 		.compatible = "amlogic,meson-s4-pwrc",
 		.data = &meson_secure_s4_pwrc_data,
 	},
+	{
+		.compatible = "amlogic,t7-pwrc",
+		.data = &amlogic_secure_t7_pwrc_data,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, meson_secure_pwrc_match_table);