| Message ID | 20230914064018.18790-4-zelong.dong@amlogic.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | reset: amlogic-c3: add reset driver | expand |
On 14/09/2023 08:40, zelong dong wrote: > From: Zelong Dong <zelong.dong@amlogic.com> > > Add the reset controller device of Amlogic C3 SoC family > > Signed-off-by: Zelong Dong <zelong.dong@amlogic.com> > Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> > --- > arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi > index 998f5050795c..d086bfab3228 100644 > --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi > +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi > @@ -6,6 +6,7 @@ > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/reset/amlogic,c3-reset.h> > > / { > cpus { > @@ -81,6 +82,12 @@ apb4: bus@fe000000 { > #size-cells = <2>; > ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; > > + reset: reset-controller@2000 { > + compatible = "amlogic,c3-reset"; > + reg = <0x0 0x2000 0x0 0x98>; > + #reset-cells = <1>; > + }; > + > periphs_pinctrl: pinctrl@4000 { > compatible = "amlogic,c3-periphs-pinctrl"; > #address-cells = <2>; Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi index 998f5050795c..d086bfab3228 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/reset/amlogic,c3-reset.h> / { cpus { @@ -81,6 +82,12 @@ apb4: bus@fe000000 { #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + reset: reset-controller@2000 { + compatible = "amlogic,c3-reset"; + reg = <0x0 0x2000 0x0 0x98>; + #reset-cells = <1>; + }; + periphs_pinctrl: pinctrl@4000 { compatible = "amlogic,c3-periphs-pinctrl"; #address-cells = <2>;