diff mbox series

[net-next,v2,01/23] net: stmmac: dwmac-anarion: use devm_stmmac_probe_config_dt()

Message ID 20230916075829.1560-2-jszhang@kernel.org (mailing list archive)
State New, archived
Headers show
Series convert to devm_stmmac_probe_config_dt | expand

Commit Message

Jisheng Zhang Sept. 16, 2023, 7:58 a.m. UTC
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().

The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

Comments

Serge Semin Sept. 18, 2023, 7:27 p.m. UTC | #1
On Sat, Sep 16, 2023 at 03:58:07PM +0800, Jisheng Zhang wrote:
> Simplify the driver's probe() function by using the devres
> variant of stmmac_probe_config_dt().
> 
> The remove_new() callback now needs to be switched to
> stmmac_pltfr_remove_no_dt().
> 
> Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
> ---
>  drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c | 12 +++---------
>  1 file changed, 3 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c
> index 58a7f08e8d78..0df3a2ad0986 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c
> @@ -115,7 +115,7 @@ static int anarion_dwmac_probe(struct platform_device *pdev)
>  	if (IS_ERR(gmac))
>  		return PTR_ERR(gmac);
>  
> -	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
> +	plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
>  	if (IS_ERR(plat_dat))
>  		return PTR_ERR(plat_dat);
>  
> @@ -124,13 +124,7 @@ static int anarion_dwmac_probe(struct platform_device *pdev)
>  	anarion_gmac_init(pdev, gmac);
>  	plat_dat->bsp_priv = gmac;
>  
> -	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
> -	if (ret) {
> -		stmmac_remove_config_dt(pdev, plat_dat);
> -		return ret;
> -	}
> -
> -	return 0;
> +	return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);

Just a general note, IMO it's better from maintainability point of
view to use the pattern:

	ret = func();
	if (ret)
		return ret;

	return 0;

Thus should you need to add any functions call after or before the
func() method invocation with possible clean-up-on-error code the
change patch will look a bit simpler and more readable.

-Serge(y)

>  }
>  
>  static const struct of_device_id anarion_dwmac_match[] = {
> @@ -141,7 +135,7 @@ MODULE_DEVICE_TABLE(of, anarion_dwmac_match);
>  
>  static struct platform_driver anarion_dwmac_driver = {
>  	.probe  = anarion_dwmac_probe,
> -	.remove_new = stmmac_pltfr_remove,
> +	.remove_new = stmmac_pltfr_remove_no_dt,
>  	.driver = {
>  		.name           = "anarion-dwmac",
>  		.pm		= &stmmac_pltfr_pm_ops,
> -- 
> 2.40.1
> 
>
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c
index 58a7f08e8d78..0df3a2ad0986 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c
@@ -115,7 +115,7 @@  static int anarion_dwmac_probe(struct platform_device *pdev)
 	if (IS_ERR(gmac))
 		return PTR_ERR(gmac);
 
-	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
+	plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
 	if (IS_ERR(plat_dat))
 		return PTR_ERR(plat_dat);
 
@@ -124,13 +124,7 @@  static int anarion_dwmac_probe(struct platform_device *pdev)
 	anarion_gmac_init(pdev, gmac);
 	plat_dat->bsp_priv = gmac;
 
-	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
-	if (ret) {
-		stmmac_remove_config_dt(pdev, plat_dat);
-		return ret;
-	}
-
-	return 0;
+	return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 }
 
 static const struct of_device_id anarion_dwmac_match[] = {
@@ -141,7 +135,7 @@  MODULE_DEVICE_TABLE(of, anarion_dwmac_match);
 
 static struct platform_driver anarion_dwmac_driver = {
 	.probe  = anarion_dwmac_probe,
-	.remove_new = stmmac_pltfr_remove,
+	.remove_new = stmmac_pltfr_remove_no_dt,
 	.driver = {
 		.name           = "anarion-dwmac",
 		.pm		= &stmmac_pltfr_pm_ops,