diff mbox series

[v1] mtd: rawnand: meson: initialize clock register

Message ID 20231109054037.3864802-1-avkrasnov@salutedevices.com (mailing list archive)
State New, archived
Headers show
Series [v1] mtd: rawnand: meson: initialize clock register | expand

Commit Message

Arseniy Krasnov Nov. 9, 2023, 5:40 a.m. UTC
Clock register must be also initialized during controller probing. If
this is not performed (for example by bootloader before) - controller
will not work.

Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
---
 drivers/mtd/nand/raw/meson_nand.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Comments

Arseniy Krasnov Nov. 12, 2023, 10:08 a.m. UTC | #1
On 09.11.2023 08:40, Arseniy Krasnov wrote:
> Clock register must be also initialized during controller probing. If
> this is not performed (for example by bootloader before) - controller
> will not work.
> 
> Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
> ---
>  drivers/mtd/nand/raw/meson_nand.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> index 0d4d358152d7..4e7fa943928c 100644
> --- a/drivers/mtd/nand/raw/meson_nand.c
> +++ b/drivers/mtd/nand/raw/meson_nand.c
> @@ -91,6 +91,8 @@
>  
>  /* eMMC clock register, misc control */
>  #define CLK_SELECT_NAND		BIT(31)
> +#define CLK_ALWAYS_ON_NAND      BIT(24)
> +#define CLK_ENABLE_VALUE        0x245
                                   ^^^^^^

Hi,

@Liang, it will be great, if You'll give some details about this magic value. I get it
from vendor's driver and it makes NAND controller alive, but I don't have any docs.

Thanks, Arseniy

>  
>  #define NFC_CLK_CYCLE		6
>  
> @@ -1152,7 +1154,7 @@ static int meson_nfc_clk_init(struct meson_nfc *nfc)
>  		return PTR_ERR(nfc->nand_clk);
>  
>  	/* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
> -	writel(CLK_SELECT_NAND | readl(nfc->reg_clk),
> +	writel(CLK_ALWAYS_ON_NAND | CLK_SELECT_NAND | CLK_ENABLE_VALUE,
>  	       nfc->reg_clk);
>  
>  	ret = clk_prepare_enable(nfc->core_clk);
Liang Yang Nov. 13, 2023, 6:47 a.m. UTC | #2
Hi Arseniy,

I remember that you asked it in another email, but i forgot to reply. Sorry

On 2023/11/12 18:08, Arseniy Krasnov wrote:
> [ EXTERNAL EMAIL ]
> 
> On 09.11.2023 08:40, Arseniy Krasnov wrote:
>> Clock register must be also initialized during controller probing. If
>> this is not performed (for example by bootloader before) - controller
>> will not work.
>>
>> Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
>> ---
>>   drivers/mtd/nand/raw/meson_nand.c | 4 +++-
>>   1 file changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
>> index 0d4d358152d7..4e7fa943928c 100644
>> --- a/drivers/mtd/nand/raw/meson_nand.c
>> +++ b/drivers/mtd/nand/raw/meson_nand.c
>> @@ -91,6 +91,8 @@
>>
>>   /* eMMC clock register, misc control */
>>   #define CLK_SELECT_NAND              BIT(31)
>> +#define CLK_ALWAYS_ON_NAND      BIT(24)
>> +#define CLK_ENABLE_VALUE        0x245
>                                     ^^^^^^
> 
> Hi,
> 
> @Liang, it will be great, if You'll give some details about this magic value. I get it
> from vendor's driver and it makes NAND controller alive, but I don't have any docs.


Bit 7:6 is used to select the clock source for NAND controller.
	00 : more clock source
	01 : fix pll is select, commonly 1GHZ in Amlogic soc chips.

The implementation in meson nfc driver should select '01', so you could 
do like this :
#define CLK_SELECT_FIX_PLL2		BIT(6)
writel(CLK_ALWAYS_ON_NAND | CLK_SELECT_NAND | CLK_SELECT_FIX_PLL2,
	 nfc->reg_clk);

Bit 5:0 is the clock divider.

> 
> Thanks, Arseniy
> 
>>
>>   #define NFC_CLK_CYCLE                6
>>
>> @@ -1152,7 +1154,7 @@ static int meson_nfc_clk_init(struct meson_nfc *nfc)
>>                return PTR_ERR(nfc->nand_clk);
>>
>>        /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
>> -     writel(CLK_SELECT_NAND | readl(nfc->reg_clk),
>> +     writel(CLK_ALWAYS_ON_NAND | CLK_SELECT_NAND | CLK_ENABLE_VALUE,
>>               nfc->reg_clk);
>>
>>        ret = clk_prepare_enable(nfc->core_clk);
diff mbox series

Patch

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 0d4d358152d7..4e7fa943928c 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -91,6 +91,8 @@ 
 
 /* eMMC clock register, misc control */
 #define CLK_SELECT_NAND		BIT(31)
+#define CLK_ALWAYS_ON_NAND      BIT(24)
+#define CLK_ENABLE_VALUE        0x245
 
 #define NFC_CLK_CYCLE		6
 
@@ -1152,7 +1154,7 @@  static int meson_nfc_clk_init(struct meson_nfc *nfc)
 		return PTR_ERR(nfc->nand_clk);
 
 	/* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
-	writel(CLK_SELECT_NAND | readl(nfc->reg_clk),
+	writel(CLK_ALWAYS_ON_NAND | CLK_SELECT_NAND | CLK_ENABLE_VALUE,
 	       nfc->reg_clk);
 
 	ret = clk_prepare_enable(nfc->core_clk);