diff mbox series

[v11,3/7] clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF

Message ID 20240325-amlogic-v6-4-upstream-dsi-ccf-vim3-v11-3-04f55de44604@linaro.org (mailing list archive)
State Superseded
Delegated to: Neil Armstrong
Headers show
Series drm/meson: add support for MIPI DSI Display | expand

Commit Message

Neil Armstrong March 25, 2024, 11:09 a.m. UTC
In order to setup the DSI clock, let's make the unused VCLK2 clock path
configuration via CCF.

The nocache option is removed from following clocks:
- vclk2_sel
- vclk2_input
- vclk2_div
- vclk2
- vclk_div1
- vclk2_div2_en
- vclk2_div4_en
- vclk2_div6_en
- vclk2_div12_en
- vclk2_div2
- vclk2_div4
- vclk2_div6
- vclk2_div12
- cts_encl_sel

vclk2 and vclk2_div uses the newly introduced vclk regmap driver
to handle the enable and reset bits.

In order to set a rate on cts_encl via the vclk2 clock path,
the NO_REPARENT flag is set on cts_encl_sel & vclk2_sel in order
to keep CCF from selection a parent.
The parents of cts_encl_sel & vclk2_sel are expected to be defined
in DT or manually set by the display driver at some point.

The following clock scheme is to be used for DSI:

xtal
\_ gp0_pll_dco
   \_ gp0_pll
      |- vclk2_sel
      |  \_ vclk2_input
      |     \_ vclk2_div
      |        \_ vclk2
      |           \_ vclk2_div1
      |              \_ cts_encl_sel
      |                 \_ cts_encl	-> to VPU LCD Encoder
      |- mipi_dsi_pxclk_sel
      \_ mipi_dsi_pxclk_div
         \_ mipi_dsi_pxclk		-> to DSI controller

The mipi_dsi_pxclk_div is set as bypass with a single /1 entry in div_table
in order to use the same GP0 for mipi_dsi_pxclk and vclk2_input.

The SET_RATE_PARENT is only set on the mipi_dsi_pxclk_sel clock so the
DSI bitclock is the reference base clock to calculate the vclk2_div value
when pixel clock is set on the cts_encl endpoint.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/clk/meson/Kconfig |  1 +
 drivers/clk/meson/g12a.c  | 72 ++++++++++++++++++++++++++++++++++-------------
 2 files changed, 53 insertions(+), 20 deletions(-)

Comments

Jerome Brunet March 29, 2024, 12:35 p.m. UTC | #1
On Mon 25 Mar 2024 at 12:09, Neil Armstrong <neil.armstrong@linaro.org> wrote:

> In order to setup the DSI clock, let's make the unused VCLK2 clock path
> configuration via CCF.
>
> The nocache option is removed from following clocks:
> - vclk2_sel
> - vclk2_input
> - vclk2_div
> - vclk2
> - vclk_div1
> - vclk2_div2_en
> - vclk2_div4_en
> - vclk2_div6_en
> - vclk2_div12_en
> - vclk2_div2
> - vclk2_div4
> - vclk2_div6
> - vclk2_div12
> - cts_encl_sel
>
> vclk2 and vclk2_div uses the newly introduced vclk regmap driver
> to handle the enable and reset bits.
>
> In order to set a rate on cts_encl via the vclk2 clock path,
> the NO_REPARENT flag is set on cts_encl_sel & vclk2_sel in order
> to keep CCF from selection a parent.
> The parents of cts_encl_sel & vclk2_sel are expected to be defined
> in DT or manually set by the display driver at some point.
>
> The following clock scheme is to be used for DSI:
>
> xtal
> \_ gp0_pll_dco
>    \_ gp0_pll
>       |- vclk2_sel
>       |  \_ vclk2_input
>       |     \_ vclk2_div
>       |        \_ vclk2
>       |           \_ vclk2_div1
>       |              \_ cts_encl_sel
>       |                 \_ cts_encl	-> to VPU LCD Encoder
>       |- mipi_dsi_pxclk_sel
>       \_ mipi_dsi_pxclk_div
>          \_ mipi_dsi_pxclk		-> to DSI controller
>
> The mipi_dsi_pxclk_div is set as bypass with a single /1 entry in div_table
> in order to use the same GP0 for mipi_dsi_pxclk and vclk2_input.
>
> The SET_RATE_PARENT is only set on the mipi_dsi_pxclk_sel clock so the
> DSI bitclock is the reference base clock to calculate the vclk2_div value
> when pixel clock is set on the cts_encl endpoint.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
>  drivers/clk/meson/Kconfig |  1 +
>  drivers/clk/meson/g12a.c  | 72 ++++++++++++++++++++++++++++++++++-------------
>  2 files changed, 53 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
> index 8a9823789fa3..59a40a49f8e1 100644
> --- a/drivers/clk/meson/Kconfig
> +++ b/drivers/clk/meson/Kconfig
> @@ -144,6 +144,7 @@ config COMMON_CLK_G12A
>  	select COMMON_CLK_MESON_EE_CLKC
>  	select COMMON_CLK_MESON_CPU_DYNDIV
>  	select COMMON_CLK_MESON_VID_PLL_DIV
> +	select COMMON_CLK_MESON_VCLK
>  	select MFD_SYSCON
>  	help
>  	  Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2
> diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
> index 90f4c6103014..083882e53b65 100644
> --- a/drivers/clk/meson/g12a.c
> +++ b/drivers/clk/meson/g12a.c
> @@ -22,6 +22,7 @@
>  #include "clk-regmap.h"
>  #include "clk-cpu-dyndiv.h"
>  #include "vid-pll-div.h"
> +#include "vclk.h"
>  #include "meson-eeclk.h"
>  #include "g12a.h"
>  
> @@ -3165,7 +3166,7 @@ static struct clk_regmap g12a_vclk2_sel = {
>  		.ops = &clk_regmap_mux_ops,
>  		.parent_hws = g12a_vclk_parent_hws,
>  		.num_parents = ARRAY_SIZE(g12a_vclk_parent_hws),
> -		.flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
> +		.flags = CLK_SET_RATE_NO_REPARENT,
>  	},
>  };
>  
> @@ -3193,7 +3194,6 @@ static struct clk_regmap g12a_vclk2_input = {
>  		.ops = &clk_regmap_gate_ops,
>  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2_sel.hw },
>  		.num_parents = 1,
> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>  	},
>  };
>  
> @@ -3215,19 +3215,32 @@ static struct clk_regmap g12a_vclk_div = {
>  };
>  
>  static struct clk_regmap g12a_vclk2_div = {
> -	.data = &(struct clk_regmap_div_data){
> -		.offset = HHI_VIID_CLK_DIV,
> -		.shift = 0,
> -		.width = 8,
> +	.data = &(struct meson_vclk_div_data){
> +		.div = {
> +			.reg_off = HHI_VIID_CLK_DIV,
> +			.shift   = 0,
> +			.width   = 8,
> +		},
> +		.enable = {
> +			.reg_off = HHI_VIID_CLK_DIV,
> +			.shift   = 16,
> +			.width   = 1,
> +		},
> +		.reset = {
> +			.reg_off = HHI_VIID_CLK_DIV,
> +			.shift   = 17,
> +			.width   = 1,
> +		},
> +		.flags = CLK_DIVIDER_ROUND_CLOSEST,
>  	},
>  	.hw.init = &(struct clk_init_data){
>  		.name = "vclk2_div",
> -		.ops = &clk_regmap_divider_ops,
> +		.ops = &meson_vclk_div_ops,
>  		.parent_hws = (const struct clk_hw *[]) {
>  			&g12a_vclk2_input.hw
>  		},
>  		.num_parents = 1,
> -		.flags = CLK_GET_RATE_NOCACHE,
> +		.flags = CLK_SET_RATE_GATE,
>  	},
>  };
>  
> @@ -3246,16 +3259,24 @@ static struct clk_regmap g12a_vclk = {
>  };
>  
>  static struct clk_regmap g12a_vclk2 = {
> -	.data = &(struct clk_regmap_gate_data){
> -		.offset = HHI_VIID_CLK_CNTL,
> -		.bit_idx = 19,
> +	.data = &(struct meson_vclk_gate_data){
> +		.enable = {
> +			.reg_off = HHI_VIID_CLK_CNTL,
> +			.shift   = 19,
> +			.width   = 1,
> +		},
> +		.reset = {
> +			.reg_off = HHI_VIID_CLK_CNTL,
> +			.shift   = 15,
> +			.width   = 1,
> +		},
>  	},
>  	.hw.init = &(struct clk_init_data) {
>  		.name = "vclk2",
> -		.ops = &clk_regmap_gate_ops,
> +		.ops = &meson_vclk_gate_ops,
>  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2_div.hw },
>  		.num_parents = 1,
> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> +		.flags = CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> @@ -3339,7 +3360,7 @@ static struct clk_regmap g12a_vclk2_div1 = {
>  		.ops = &clk_regmap_gate_ops,
>  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
>  		.num_parents = 1,
> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> +		.flags = CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> @@ -3353,7 +3374,7 @@ static struct clk_regmap g12a_vclk2_div2_en = {
>  		.ops = &clk_regmap_gate_ops,
>  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
>  		.num_parents = 1,
> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> +		.flags = CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> @@ -3367,7 +3388,7 @@ static struct clk_regmap g12a_vclk2_div4_en = {
>  		.ops = &clk_regmap_gate_ops,
>  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
>  		.num_parents = 1,
> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> +		.flags = CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> @@ -3381,7 +3402,7 @@ static struct clk_regmap g12a_vclk2_div6_en = {
>  		.ops = &clk_regmap_gate_ops,
>  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
>  		.num_parents = 1,
> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> +		.flags = CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> @@ -3395,7 +3416,7 @@ static struct clk_regmap g12a_vclk2_div12_en = {
>  		.ops = &clk_regmap_gate_ops,
>  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
>  		.num_parents = 1,
> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> +		.flags = CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> @@ -3461,6 +3482,7 @@ static struct clk_fixed_factor g12a_vclk2_div2 = {
>  			&g12a_vclk2_div2_en.hw
>  		},
>  		.num_parents = 1,
> +		.flags = CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> @@ -3474,6 +3496,7 @@ static struct clk_fixed_factor g12a_vclk2_div4 = {
>  			&g12a_vclk2_div4_en.hw
>  		},
>  		.num_parents = 1,
> +		.flags = CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> @@ -3487,6 +3510,7 @@ static struct clk_fixed_factor g12a_vclk2_div6 = {
>  			&g12a_vclk2_div6_en.hw
>  		},
>  		.num_parents = 1,
> +		.flags = CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> @@ -3500,6 +3524,7 @@ static struct clk_fixed_factor g12a_vclk2_div12 = {
>  			&g12a_vclk2_div12_en.hw
>  		},
>  		.num_parents = 1,
> +		.flags = CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> @@ -3561,7 +3586,7 @@ static struct clk_regmap g12a_cts_encl_sel = {
>  		.ops = &clk_regmap_mux_ops,
>  		.parent_hws = g12a_cts_parent_hws,
>  		.num_parents = ARRAY_SIZE(g12a_cts_parent_hws),
> -		.flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
> +		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
>  	},
>  };
>  
> @@ -3717,15 +3742,22 @@ static struct clk_regmap g12a_mipi_dsi_pxclk_sel = {
>  		.ops = &clk_regmap_mux_ops,
>  		.parent_hws = g12a_mipi_dsi_pxclk_parent_hws,
>  		.num_parents = ARRAY_SIZE(g12a_mipi_dsi_pxclk_parent_hws),
> -		.flags = CLK_SET_RATE_NO_REPARENT,
> +		.flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>  	},
>  };
>  
> +/* Force as bypass by forcing a single /1 table entry, and not rely of boot value */

The comment here is not entirely accurate.

The table below will actually force to only use a 1 divider on
.set_rate(), not on boot, AFAICT.

The boot value will stay in the register until the first call to set_rate().

Considering this is quite fragile as it is, It would be nice to prefix
the updated comment with "FIXME"

> +static const struct clk_div_table g12a_mipi_dsi_pxclk_div_table[] = {
> +	{ .val = 0, .div = 1 },
> +	{ /* sentinel */ },
> +};
> +
>  static struct clk_regmap g12a_mipi_dsi_pxclk_div = {
>  	.data = &(struct clk_regmap_div_data){
>  		.offset = HHI_MIPIDSI_PHY_CLK_CNTL,
>  		.shift = 0,
>  		.width = 7,
> +		.table = g12a_mipi_dsi_pxclk_div_table,
>  	},
>  	.hw.init = &(struct clk_init_data){
>  		.name = "mipi_dsi_pxclk_div",
Neil Armstrong March 29, 2024, 4:06 p.m. UTC | #2
On 29/03/2024 13:35, Jerome Brunet wrote:
> 
> On Mon 25 Mar 2024 at 12:09, Neil Armstrong <neil.armstrong@linaro.org> wrote:
> 
>> In order to setup the DSI clock, let's make the unused VCLK2 clock path
>> configuration via CCF.
>>
>> The nocache option is removed from following clocks:
>> - vclk2_sel
>> - vclk2_input
>> - vclk2_div
>> - vclk2
>> - vclk_div1
>> - vclk2_div2_en
>> - vclk2_div4_en
>> - vclk2_div6_en
>> - vclk2_div12_en
>> - vclk2_div2
>> - vclk2_div4
>> - vclk2_div6
>> - vclk2_div12
>> - cts_encl_sel
>>
>> vclk2 and vclk2_div uses the newly introduced vclk regmap driver
>> to handle the enable and reset bits.
>>
>> In order to set a rate on cts_encl via the vclk2 clock path,
>> the NO_REPARENT flag is set on cts_encl_sel & vclk2_sel in order
>> to keep CCF from selection a parent.
>> The parents of cts_encl_sel & vclk2_sel are expected to be defined
>> in DT or manually set by the display driver at some point.
>>
>> The following clock scheme is to be used for DSI:
>>
>> xtal
>> \_ gp0_pll_dco
>>     \_ gp0_pll
>>        |- vclk2_sel
>>        |  \_ vclk2_input
>>        |     \_ vclk2_div
>>        |        \_ vclk2
>>        |           \_ vclk2_div1
>>        |              \_ cts_encl_sel
>>        |                 \_ cts_encl	-> to VPU LCD Encoder
>>        |- mipi_dsi_pxclk_sel
>>        \_ mipi_dsi_pxclk_div
>>           \_ mipi_dsi_pxclk		-> to DSI controller
>>
>> The mipi_dsi_pxclk_div is set as bypass with a single /1 entry in div_table
>> in order to use the same GP0 for mipi_dsi_pxclk and vclk2_input.
>>
>> The SET_RATE_PARENT is only set on the mipi_dsi_pxclk_sel clock so the
>> DSI bitclock is the reference base clock to calculate the vclk2_div value
>> when pixel clock is set on the cts_encl endpoint.
>>
>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
>> ---
>>   drivers/clk/meson/Kconfig |  1 +
>>   drivers/clk/meson/g12a.c  | 72 ++++++++++++++++++++++++++++++++++-------------
>>   2 files changed, 53 insertions(+), 20 deletions(-)
>>
>> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>> index 8a9823789fa3..59a40a49f8e1 100644
>> --- a/drivers/clk/meson/Kconfig
>> +++ b/drivers/clk/meson/Kconfig
>> @@ -144,6 +144,7 @@ config COMMON_CLK_G12A
>>   	select COMMON_CLK_MESON_EE_CLKC
>>   	select COMMON_CLK_MESON_CPU_DYNDIV
>>   	select COMMON_CLK_MESON_VID_PLL_DIV
>> +	select COMMON_CLK_MESON_VCLK
>>   	select MFD_SYSCON
>>   	help
>>   	  Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2
>> diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
>> index 90f4c6103014..083882e53b65 100644
>> --- a/drivers/clk/meson/g12a.c
>> +++ b/drivers/clk/meson/g12a.c
>> @@ -22,6 +22,7 @@
>>   #include "clk-regmap.h"
>>   #include "clk-cpu-dyndiv.h"
>>   #include "vid-pll-div.h"
>> +#include "vclk.h"
>>   #include "meson-eeclk.h"
>>   #include "g12a.h"
>>   
>> @@ -3165,7 +3166,7 @@ static struct clk_regmap g12a_vclk2_sel = {
>>   		.ops = &clk_regmap_mux_ops,
>>   		.parent_hws = g12a_vclk_parent_hws,
>>   		.num_parents = ARRAY_SIZE(g12a_vclk_parent_hws),
>> -		.flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
>> +		.flags = CLK_SET_RATE_NO_REPARENT,
>>   	},
>>   };
>>   
>> @@ -3193,7 +3194,6 @@ static struct clk_regmap g12a_vclk2_input = {
>>   		.ops = &clk_regmap_gate_ops,
>>   		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2_sel.hw },
>>   		.num_parents = 1,
>> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>>   	},
>>   };
>>   
>> @@ -3215,19 +3215,32 @@ static struct clk_regmap g12a_vclk_div = {
>>   };
>>   
>>   static struct clk_regmap g12a_vclk2_div = {
>> -	.data = &(struct clk_regmap_div_data){
>> -		.offset = HHI_VIID_CLK_DIV,
>> -		.shift = 0,
>> -		.width = 8,
>> +	.data = &(struct meson_vclk_div_data){
>> +		.div = {
>> +			.reg_off = HHI_VIID_CLK_DIV,
>> +			.shift   = 0,
>> +			.width   = 8,
>> +		},
>> +		.enable = {
>> +			.reg_off = HHI_VIID_CLK_DIV,
>> +			.shift   = 16,
>> +			.width   = 1,
>> +		},
>> +		.reset = {
>> +			.reg_off = HHI_VIID_CLK_DIV,
>> +			.shift   = 17,
>> +			.width   = 1,
>> +		},
>> +		.flags = CLK_DIVIDER_ROUND_CLOSEST,
>>   	},
>>   	.hw.init = &(struct clk_init_data){
>>   		.name = "vclk2_div",
>> -		.ops = &clk_regmap_divider_ops,
>> +		.ops = &meson_vclk_div_ops,
>>   		.parent_hws = (const struct clk_hw *[]) {
>>   			&g12a_vclk2_input.hw
>>   		},
>>   		.num_parents = 1,
>> -		.flags = CLK_GET_RATE_NOCACHE,
>> +		.flags = CLK_SET_RATE_GATE,
>>   	},
>>   };
>>   
>> @@ -3246,16 +3259,24 @@ static struct clk_regmap g12a_vclk = {
>>   };
>>   
>>   static struct clk_regmap g12a_vclk2 = {
>> -	.data = &(struct clk_regmap_gate_data){
>> -		.offset = HHI_VIID_CLK_CNTL,
>> -		.bit_idx = 19,
>> +	.data = &(struct meson_vclk_gate_data){
>> +		.enable = {
>> +			.reg_off = HHI_VIID_CLK_CNTL,
>> +			.shift   = 19,
>> +			.width   = 1,
>> +		},
>> +		.reset = {
>> +			.reg_off = HHI_VIID_CLK_CNTL,
>> +			.shift   = 15,
>> +			.width   = 1,
>> +		},
>>   	},
>>   	.hw.init = &(struct clk_init_data) {
>>   		.name = "vclk2",
>> -		.ops = &clk_regmap_gate_ops,
>> +		.ops = &meson_vclk_gate_ops,
>>   		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2_div.hw },
>>   		.num_parents = 1,
>> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> +		.flags = CLK_SET_RATE_PARENT,
>>   	},
>>   };
>>   
>> @@ -3339,7 +3360,7 @@ static struct clk_regmap g12a_vclk2_div1 = {
>>   		.ops = &clk_regmap_gate_ops,
>>   		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
>>   		.num_parents = 1,
>> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> +		.flags = CLK_SET_RATE_PARENT,
>>   	},
>>   };
>>   
>> @@ -3353,7 +3374,7 @@ static struct clk_regmap g12a_vclk2_div2_en = {
>>   		.ops = &clk_regmap_gate_ops,
>>   		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
>>   		.num_parents = 1,
>> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> +		.flags = CLK_SET_RATE_PARENT,
>>   	},
>>   };
>>   
>> @@ -3367,7 +3388,7 @@ static struct clk_regmap g12a_vclk2_div4_en = {
>>   		.ops = &clk_regmap_gate_ops,
>>   		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
>>   		.num_parents = 1,
>> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> +		.flags = CLK_SET_RATE_PARENT,
>>   	},
>>   };
>>   
>> @@ -3381,7 +3402,7 @@ static struct clk_regmap g12a_vclk2_div6_en = {
>>   		.ops = &clk_regmap_gate_ops,
>>   		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
>>   		.num_parents = 1,
>> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> +		.flags = CLK_SET_RATE_PARENT,
>>   	},
>>   };
>>   
>> @@ -3395,7 +3416,7 @@ static struct clk_regmap g12a_vclk2_div12_en = {
>>   		.ops = &clk_regmap_gate_ops,
>>   		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
>>   		.num_parents = 1,
>> -		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
>> +		.flags = CLK_SET_RATE_PARENT,
>>   	},
>>   };
>>   
>> @@ -3461,6 +3482,7 @@ static struct clk_fixed_factor g12a_vclk2_div2 = {
>>   			&g12a_vclk2_div2_en.hw
>>   		},
>>   		.num_parents = 1,
>> +		.flags = CLK_SET_RATE_PARENT,
>>   	},
>>   };
>>   
>> @@ -3474,6 +3496,7 @@ static struct clk_fixed_factor g12a_vclk2_div4 = {
>>   			&g12a_vclk2_div4_en.hw
>>   		},
>>   		.num_parents = 1,
>> +		.flags = CLK_SET_RATE_PARENT,
>>   	},
>>   };
>>   
>> @@ -3487,6 +3510,7 @@ static struct clk_fixed_factor g12a_vclk2_div6 = {
>>   			&g12a_vclk2_div6_en.hw
>>   		},
>>   		.num_parents = 1,
>> +		.flags = CLK_SET_RATE_PARENT,
>>   	},
>>   };
>>   
>> @@ -3500,6 +3524,7 @@ static struct clk_fixed_factor g12a_vclk2_div12 = {
>>   			&g12a_vclk2_div12_en.hw
>>   		},
>>   		.num_parents = 1,
>> +		.flags = CLK_SET_RATE_PARENT,
>>   	},
>>   };
>>   
>> @@ -3561,7 +3586,7 @@ static struct clk_regmap g12a_cts_encl_sel = {
>>   		.ops = &clk_regmap_mux_ops,
>>   		.parent_hws = g12a_cts_parent_hws,
>>   		.num_parents = ARRAY_SIZE(g12a_cts_parent_hws),
>> -		.flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
>> +		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
>>   	},
>>   };
>>   
>> @@ -3717,15 +3742,22 @@ static struct clk_regmap g12a_mipi_dsi_pxclk_sel = {
>>   		.ops = &clk_regmap_mux_ops,
>>   		.parent_hws = g12a_mipi_dsi_pxclk_parent_hws,
>>   		.num_parents = ARRAY_SIZE(g12a_mipi_dsi_pxclk_parent_hws),
>> -		.flags = CLK_SET_RATE_NO_REPARENT,
>> +		.flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
>>   	},
>>   };
>>   
>> +/* Force as bypass by forcing a single /1 table entry, and not rely of boot value */
> 
> The comment here is not entirely accurate.
> 
> The table below will actually force to only use a 1 divider on
> .set_rate(), not on boot, AFAICT.
> 
> The boot value will stay in the register until the first call to set_rate().
> 
> Considering this is quite fragile as it is, It would be nice to prefix
> the updated comment with "FIXME"

Ack

> 
>> +static const struct clk_div_table g12a_mipi_dsi_pxclk_div_table[] = {
>> +	{ .val = 0, .div = 1 },
>> +	{ /* sentinel */ },
>> +};
>> +
>>   static struct clk_regmap g12a_mipi_dsi_pxclk_div = {
>>   	.data = &(struct clk_regmap_div_data){
>>   		.offset = HHI_MIPIDSI_PHY_CLK_CNTL,
>>   		.shift = 0,
>>   		.width = 7,
>> +		.table = g12a_mipi_dsi_pxclk_div_table,
>>   	},
>>   	.hw.init = &(struct clk_init_data){
>>   		.name = "mipi_dsi_pxclk_div",
> 
>
diff mbox series

Patch

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 8a9823789fa3..59a40a49f8e1 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -144,6 +144,7 @@  config COMMON_CLK_G12A
 	select COMMON_CLK_MESON_EE_CLKC
 	select COMMON_CLK_MESON_CPU_DYNDIV
 	select COMMON_CLK_MESON_VID_PLL_DIV
+	select COMMON_CLK_MESON_VCLK
 	select MFD_SYSCON
 	help
 	  Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 90f4c6103014..083882e53b65 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -22,6 +22,7 @@ 
 #include "clk-regmap.h"
 #include "clk-cpu-dyndiv.h"
 #include "vid-pll-div.h"
+#include "vclk.h"
 #include "meson-eeclk.h"
 #include "g12a.h"
 
@@ -3165,7 +3166,7 @@  static struct clk_regmap g12a_vclk2_sel = {
 		.ops = &clk_regmap_mux_ops,
 		.parent_hws = g12a_vclk_parent_hws,
 		.num_parents = ARRAY_SIZE(g12a_vclk_parent_hws),
-		.flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
+		.flags = CLK_SET_RATE_NO_REPARENT,
 	},
 };
 
@@ -3193,7 +3194,6 @@  static struct clk_regmap g12a_vclk2_input = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2_sel.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
 	},
 };
 
@@ -3215,19 +3215,32 @@  static struct clk_regmap g12a_vclk_div = {
 };
 
 static struct clk_regmap g12a_vclk2_div = {
-	.data = &(struct clk_regmap_div_data){
-		.offset = HHI_VIID_CLK_DIV,
-		.shift = 0,
-		.width = 8,
+	.data = &(struct meson_vclk_div_data){
+		.div = {
+			.reg_off = HHI_VIID_CLK_DIV,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.enable = {
+			.reg_off = HHI_VIID_CLK_DIV,
+			.shift   = 16,
+			.width   = 1,
+		},
+		.reset = {
+			.reg_off = HHI_VIID_CLK_DIV,
+			.shift   = 17,
+			.width   = 1,
+		},
+		.flags = CLK_DIVIDER_ROUND_CLOSEST,
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "vclk2_div",
-		.ops = &clk_regmap_divider_ops,
+		.ops = &meson_vclk_div_ops,
 		.parent_hws = (const struct clk_hw *[]) {
 			&g12a_vclk2_input.hw
 		},
 		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
+		.flags = CLK_SET_RATE_GATE,
 	},
 };
 
@@ -3246,16 +3259,24 @@  static struct clk_regmap g12a_vclk = {
 };
 
 static struct clk_regmap g12a_vclk2 = {
-	.data = &(struct clk_regmap_gate_data){
-		.offset = HHI_VIID_CLK_CNTL,
-		.bit_idx = 19,
+	.data = &(struct meson_vclk_gate_data){
+		.enable = {
+			.reg_off = HHI_VIID_CLK_CNTL,
+			.shift   = 19,
+			.width   = 1,
+		},
+		.reset = {
+			.reg_off = HHI_VIID_CLK_CNTL,
+			.shift   = 15,
+			.width   = 1,
+		},
 	},
 	.hw.init = &(struct clk_init_data) {
 		.name = "vclk2",
-		.ops = &clk_regmap_gate_ops,
+		.ops = &meson_vclk_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2_div.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3339,7 +3360,7 @@  static struct clk_regmap g12a_vclk2_div1 = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3353,7 +3374,7 @@  static struct clk_regmap g12a_vclk2_div2_en = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3367,7 +3388,7 @@  static struct clk_regmap g12a_vclk2_div4_en = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3381,7 +3402,7 @@  static struct clk_regmap g12a_vclk2_div6_en = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3395,7 +3416,7 @@  static struct clk_regmap g12a_vclk2_div12_en = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3461,6 +3482,7 @@  static struct clk_fixed_factor g12a_vclk2_div2 = {
 			&g12a_vclk2_div2_en.hw
 		},
 		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3474,6 +3496,7 @@  static struct clk_fixed_factor g12a_vclk2_div4 = {
 			&g12a_vclk2_div4_en.hw
 		},
 		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3487,6 +3510,7 @@  static struct clk_fixed_factor g12a_vclk2_div6 = {
 			&g12a_vclk2_div6_en.hw
 		},
 		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3500,6 +3524,7 @@  static struct clk_fixed_factor g12a_vclk2_div12 = {
 			&g12a_vclk2_div12_en.hw
 		},
 		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3561,7 +3586,7 @@  static struct clk_regmap g12a_cts_encl_sel = {
 		.ops = &clk_regmap_mux_ops,
 		.parent_hws = g12a_cts_parent_hws,
 		.num_parents = ARRAY_SIZE(g12a_cts_parent_hws),
-		.flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
+		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
 	},
 };
 
@@ -3717,15 +3742,22 @@  static struct clk_regmap g12a_mipi_dsi_pxclk_sel = {
 		.ops = &clk_regmap_mux_ops,
 		.parent_hws = g12a_mipi_dsi_pxclk_parent_hws,
 		.num_parents = ARRAY_SIZE(g12a_mipi_dsi_pxclk_parent_hws),
-		.flags = CLK_SET_RATE_NO_REPARENT,
+		.flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
 	},
 };
 
+/* Force as bypass by forcing a single /1 table entry, and not rely of boot value */
+static const struct clk_div_table g12a_mipi_dsi_pxclk_div_table[] = {
+	{ .val = 0, .div = 1 },
+	{ /* sentinel */ },
+};
+
 static struct clk_regmap g12a_mipi_dsi_pxclk_div = {
 	.data = &(struct clk_regmap_div_data){
 		.offset = HHI_MIPIDSI_PHY_CLK_CNTL,
 		.shift = 0,
 		.width = 7,
+		.table = g12a_mipi_dsi_pxclk_div_table,
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "mipi_dsi_pxclk_div",