| Message ID | 20240328133802.15651-3-ddrokosov@salutedevices.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | thermal: amlogic: introduce A1 SoC family Thermal Sensor controller | expand |
On 28/03/2024 14:37, Dmitry Rokosov wrote: > In comparison to other Amlogic chips, there is one key difference. > The offset for the sec_ao base, also known as u_efuse_off, is special, > while other aspects remain the same. > > Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com> > --- > drivers/thermal/amlogic_thermal.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c > index 5877cde25b79..1d23afd32013 100644 > --- a/drivers/thermal/amlogic_thermal.c > +++ b/drivers/thermal/amlogic_thermal.c > @@ -222,6 +222,12 @@ static const struct amlogic_thermal_data amlogic_thermal_g12a_ddr_param = { > .regmap_config = &amlogic_thermal_regmap_config_g12a, > }; > > +static const struct amlogic_thermal_data amlogic_thermal_a1_cpu_param = { > + .u_efuse_off = 0x114, > + .calibration_parameters = &amlogic_thermal_g12a, > + .regmap_config = &amlogic_thermal_regmap_config_g12a, > +}; > + > static const struct of_device_id of_amlogic_thermal_match[] = { > { > .compatible = "amlogic,g12a-ddr-thermal", > @@ -231,6 +237,10 @@ static const struct of_device_id of_amlogic_thermal_match[] = { > .compatible = "amlogic,g12a-cpu-thermal", > .data = &amlogic_thermal_g12a_cpu_param, > }, > + { > + .compatible = "amlogic,a1-cpu-thermal", > + .data = &amlogic_thermal_a1_cpu_param, > + }, > { /* sentinel */ } > }; > MODULE_DEVICE_TABLE(of, of_amlogic_thermal_match); Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Keep it even it you change the compatible, Thanks, Neil
diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c index 5877cde25b79..1d23afd32013 100644 --- a/drivers/thermal/amlogic_thermal.c +++ b/drivers/thermal/amlogic_thermal.c @@ -222,6 +222,12 @@ static const struct amlogic_thermal_data amlogic_thermal_g12a_ddr_param = { .regmap_config = &amlogic_thermal_regmap_config_g12a, }; +static const struct amlogic_thermal_data amlogic_thermal_a1_cpu_param = { + .u_efuse_off = 0x114, + .calibration_parameters = &amlogic_thermal_g12a, + .regmap_config = &amlogic_thermal_regmap_config_g12a, +}; + static const struct of_device_id of_amlogic_thermal_match[] = { { .compatible = "amlogic,g12a-ddr-thermal", @@ -231,6 +237,10 @@ static const struct of_device_id of_amlogic_thermal_match[] = { .compatible = "amlogic,g12a-cpu-thermal", .data = &amlogic_thermal_g12a_cpu_param, }, + { + .compatible = "amlogic,a1-cpu-thermal", + .data = &amlogic_thermal_a1_cpu_param, + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, of_amlogic_thermal_match);
In comparison to other Amlogic chips, there is one key difference. The offset for the sec_ao base, also known as u_efuse_off, is special, while other aspects remain the same. Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com> --- drivers/thermal/amlogic_thermal.c | 10 ++++++++++ 1 file changed, 10 insertions(+)