diff mbox series

[v3,21/41] iio: gyro: bmg160_core: make use of regmap_clear_bits()

Message ID 20240617-review-v3-21-88d1338c4cca@baylibre.com (mailing list archive)
State New, archived
Headers show
Series iio: simplify with regmap_set_bits(), regmap_clear_bits() | expand

Commit Message

Trevor Gamblin June 17, 2024, 1:50 p.m. UTC 
Instead of using regmap_update_bits() and passing val = 0, use
regmap_clear_bits().

Suggested-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
---
 drivers/iio/gyro/bmg160_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iio/gyro/bmg160_core.c b/drivers/iio/gyro/bmg160_core.c
index 0e2eb0e98235..10728d5ccae3 100644
--- a/drivers/iio/gyro/bmg160_core.c
+++ b/drivers/iio/gyro/bmg160_core.c
@@ -285,8 +285,8 @@  static int bmg160_chip_init(struct bmg160_data *data)
 	data->slope_thres = val;
 
 	/* Set default interrupt mode */
-	ret = regmap_update_bits(data->regmap, BMG160_REG_INT_EN_1,
-				 BMG160_INT1_BIT_OD, 0);
+	ret = regmap_clear_bits(data->regmap, BMG160_REG_INT_EN_1,
+				BMG160_INT1_BIT_OD);
 	if (ret < 0) {
 		dev_err(dev, "Error updating bits in reg_int_en_1\n");
 		return ret;