diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 78f648c9c97d..3c97b3a1649d 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -132,6 +132,20 @@ config COMMON_CLK_A1_PERIPHERALS
 	  device, A1 SoC Family. Say Y if you want A1 Peripherals clock
 	  controller to work.
 
+config COMMON_CLK_A5_PLL
+	tristate "Amlogic A5 PLL clock controller"
+	depends on ARM64
+	default y
+	imply COMMON_CLK_SCMI
+	select COMMON_CLK_MESON_REGMAP
+	select COMMON_CLK_MESON_PLL
+	select COMMON_CLK_MESON_MPLL
+	select COMMON_CLK_MESON_CLKC_UTILS
+	help
+	  Support for the PLL clock controller on Amlogic AV40x device, AKA A5.
+	  Say Y if you want the board to work, because PLLs are the parent
+	  of most peripherals.
+
 config COMMON_CLK_C3_PLL
 	tristate "Amlogic C3 PLL clock controller"
 	depends on ARM64
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index bc56a47931c1..fc4b8a723145 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
 obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
 obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
 obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
+obj-$(CONFIG_COMMON_CLK_A5_PLL) += a5-pll.o
 obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o
 obj-$(CONFIG_COMMON_CLK_C3_PERIPHERALS) += c3-peripherals.o
 obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
diff --git a/drivers/clk/meson/a5-pll.c b/drivers/clk/meson/a5-pll.c
new file mode 100644
index 000000000000..f18700dfd055
--- /dev/null
+++ b/drivers/clk/meson/a5-pll.c
@@ -0,0 +1,543 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Amlogic A5 PLL Controller Driver
+ *
+ * Copyright (c) 2024 Amlogic, inc.
+ * Author: Chuan Liu <chuan.liu@amlogic.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+#include "clk-regmap.h"
+#include "clk-pll.h"
+#include "clk-mpll.h"
+#include "meson-clkc-utils.h"
+#include <dt-bindings/clock/amlogic,a5-pll-clkc.h>
+
+#define ANACTRL_GP0PLL_CTRL0			0x80
+#define ANACTRL_GP0PLL_CTRL1			0x84
+#define ANACTRL_GP0PLL_CTRL2			0x88
+#define ANACTRL_GP0PLL_CTRL3			0x8c
+#define ANACTRL_GP0PLL_CTRL4			0x90
+#define ANACTRL_GP0PLL_CTRL5			0x94
+#define ANACTRL_GP0PLL_CTRL6			0x98
+#define ANACTRL_HIFIPLL_CTRL0			0x100
+#define ANACTRL_HIFIPLL_CTRL1			0x104
+#define ANACTRL_HIFIPLL_CTRL2			0x108
+#define ANACTRL_HIFIPLL_CTRL3			0x10c
+#define ANACTRL_HIFIPLL_CTRL4			0x110
+#define ANACTRL_HIFIPLL_CTRL5			0x114
+#define ANACTRL_HIFIPLL_CTRL6			0x118
+#define ANACTRL_MPLL_CTRL0			0x180
+#define ANACTRL_MPLL_CTRL1			0x184
+#define ANACTRL_MPLL_CTRL2			0x188
+#define ANACTRL_MPLL_CTRL3			0x18c
+#define ANACTRL_MPLL_CTRL4			0x190
+#define ANACTRL_MPLL_CTRL5			0x194
+#define ANACTRL_MPLL_CTRL6			0x198
+#define ANACTRL_MPLL_CTRL7			0x19c
+#define ANACTRL_MPLL_CTRL8			0x1a0
+
+static struct clk_fixed_factor mpll_prediv = {
+	.mult = 1,
+	.div = 2,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll_prediv",
+		.ops = &clk_fixed_factor_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "fix_dco"
+		},
+		.num_parents = 1,
+	},
+};
+
+static const struct reg_sequence mpll0_init_regs[] = {
+	{ .reg = ANACTRL_MPLL_CTRL2,	.def = 0x40000033 },
+};
+
+static struct clk_regmap mpll0_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = ANACTRL_MPLL_CTRL1,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = ANACTRL_MPLL_CTRL1,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = ANACTRL_MPLL_CTRL1,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = ANACTRL_MPLL_CTRL1,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.init_regs = mpll0_init_regs,
+		.init_count = ARRAY_SIZE(mpll0_init_regs),
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll0_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&mpll_prediv.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap mpll0 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = ANACTRL_MPLL_CTRL1,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) { &mpll0_div.hw },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct reg_sequence mpll1_init_regs[] = {
+	{ .reg = ANACTRL_MPLL_CTRL4,	.def = 0x40000033 },
+};
+
+static struct clk_regmap mpll1_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = ANACTRL_MPLL_CTRL3,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = ANACTRL_MPLL_CTRL3,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = ANACTRL_MPLL_CTRL3,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = ANACTRL_MPLL_CTRL3,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.init_regs = mpll1_init_regs,
+		.init_count = ARRAY_SIZE(mpll1_init_regs),
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll1_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&mpll_prediv.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap mpll1 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = ANACTRL_MPLL_CTRL3,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll1",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) { &mpll1_div.hw },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct reg_sequence mpll2_init_regs[] = {
+	{ .reg = ANACTRL_MPLL_CTRL6,	.def = 0x40000033 },
+};
+
+static struct clk_regmap mpll2_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = ANACTRL_MPLL_CTRL5,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = ANACTRL_MPLL_CTRL5,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = ANACTRL_MPLL_CTRL5,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = ANACTRL_MPLL_CTRL5,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.init_regs = mpll2_init_regs,
+		.init_count = ARRAY_SIZE(mpll2_init_regs),
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll2_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&mpll_prediv.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap mpll2 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = ANACTRL_MPLL_CTRL5,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll2",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) { &mpll2_div.hw },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct reg_sequence mpll3_init_regs[] = {
+	{ .reg = ANACTRL_MPLL_CTRL8,	.def = 0x40000033 },
+};
+
+static struct clk_regmap mpll3_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = ANACTRL_MPLL_CTRL7,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = ANACTRL_MPLL_CTRL7,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = ANACTRL_MPLL_CTRL7,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = ANACTRL_MPLL_CTRL7,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.init_regs = mpll3_init_regs,
+		.init_count = ARRAY_SIZE(mpll3_init_regs),
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll3_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&mpll_prediv.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap mpll3 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = ANACTRL_MPLL_CTRL7,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll3",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) { &mpll3_div.hw },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct reg_sequence gp0_init_regs[] = {
+	{ .reg = ANACTRL_GP0PLL_CTRL2, .def = 0x00000000 },
+	{ .reg = ANACTRL_GP0PLL_CTRL3, .def = 0x6a295c00 },
+	{ .reg = ANACTRL_GP0PLL_CTRL4, .def = 0x65771290 },
+	{ .reg = ANACTRL_GP0PLL_CTRL5, .def = 0x3927200a },
+	{ .reg = ANACTRL_GP0PLL_CTRL6, .def = 0x54540000 }
+};
+
+static const struct pll_mult_range gp0_pll_mult_range = {
+	.min = 125,
+	.max = 250,
+};
+
+static struct clk_regmap gp0_pll_dco = {
+	.data = &(struct meson_clk_pll_data) {
+		.en = {
+			.reg_off = ANACTRL_GP0PLL_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.m = {
+			.reg_off = ANACTRL_GP0PLL_CTRL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.frac = {
+			.reg_off = ANACTRL_GP0PLL_CTRL1,
+			.shift   = 0,
+			.width   = 17,
+		},
+		.n = {
+			.reg_off = ANACTRL_GP0PLL_CTRL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.l = {
+			.reg_off = ANACTRL_GP0PLL_CTRL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = ANACTRL_GP0PLL_CTRL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.range = &gp0_pll_mult_range,
+		.init_regs = gp0_init_regs,
+		.init_count = ARRAY_SIZE(gp0_init_regs),
+		.frac_max = 100000,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "gp0_pll_dco",
+		.ops = &meson_clk_pll_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal_24m",
+		},
+		.num_parents = 1,
+	},
+};
+
+/* The maximum frequency divider supports is 32, not 128(2^7) */
+static const struct clk_div_table gp0_pll_od_table[] = {
+	{ 0,  1 },
+	{ 1,  2 },
+	{ 2,  4 },
+	{ 3,  8 },
+	{ 4, 16 },
+	{ 5, 32 },
+	{ /* sentinel */ }
+};
+
+static struct clk_regmap gp0_pll = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = ANACTRL_GP0PLL_CTRL0,
+		.shift = 16,
+		.width = 3,
+		.table = gp0_pll_od_table,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "gp0_pll",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&gp0_pll_dco.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct reg_sequence hifi_init_regs[] = {
+	{ .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00000000 },
+	{ .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x6a295c00 },
+	{ .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x65771290 },
+	{ .reg = ANACTRL_HIFIPLL_CTRL5, .def = 0x3927200a },
+	{ .reg = ANACTRL_HIFIPLL_CTRL6, .def = 0x54540000 }
+};
+
+static const struct pll_mult_range hifi_pll_mult_range = {
+	.min = 125,
+	.max = 250,
+};
+
+static struct clk_regmap hifi_pll_dco = {
+	.data = &(struct meson_clk_pll_data) {
+		.en = {
+			.reg_off = ANACTRL_HIFIPLL_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.m = {
+			.reg_off = ANACTRL_HIFIPLL_CTRL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.frac = {
+			.reg_off = ANACTRL_HIFIPLL_CTRL1,
+			.shift   = 0,
+			.width   = 17,
+		},
+		.n = {
+			.reg_off = ANACTRL_HIFIPLL_CTRL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.l = {
+			.reg_off = ANACTRL_HIFIPLL_CTRL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = ANACTRL_HIFIPLL_CTRL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.range = &hifi_pll_mult_range,
+		.init_regs = hifi_init_regs,
+		.init_count = ARRAY_SIZE(hifi_init_regs),
+		.frac_max = 100000,
+		/* NOTE: The original design of hifi_pll is to provide
+		 * clock for audio, which requires clock accuracy.
+		 * Therefore, flag CLK_MESON_PLL_ROUND_CLOSEST is added
+		 * to make the output frequency of hifi_pll closer to
+		 * the target frequency.
+		 */
+		.flags = CLK_MESON_PLL_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "hifi_pll_dco",
+		.ops = &meson_clk_pll_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal_24m",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap hifi_pll = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = ANACTRL_HIFIPLL_CTRL0,
+		.shift = 16,
+		/* NOTE: The actual reserved bit width of the od (output
+		 * divider) of hifi_pll is 3 bit, but its actual maximum
+		 * effective divider factor is 8. It can just use 2 bit and add
+		 * flag CLK_DIVIDER_POWER_OF_TWO (max_div = 2^3 = 8).
+		 */
+		.width = 2,
+		.flags = CLK_DIVIDER_POWER_OF_TWO,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "hifi_pll",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&hifi_pll_dco.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_hw *a5_pll_hw_clks[] = {
+	[CLKID_MPLL_PREDIV]	= &mpll_prediv.hw,
+	[CLKID_MPLL0_DIV]	= &mpll0_div.hw,
+	[CLKID_MPLL0]		= &mpll0.hw,
+	[CLKID_MPLL1_DIV]	= &mpll1_div.hw,
+	[CLKID_MPLL1]		= &mpll1.hw,
+	[CLKID_MPLL2_DIV]	= &mpll2_div.hw,
+	[CLKID_MPLL2]		= &mpll2.hw,
+	[CLKID_MPLL3_DIV]	= &mpll3_div.hw,
+	[CLKID_MPLL3]		= &mpll3.hw,
+	[CLKID_GP0_PLL_DCO]	= &gp0_pll_dco.hw,
+	[CLKID_GP0_PLL]		= &gp0_pll.hw,
+	[CLKID_HIFI_PLL_DCO]	= &hifi_pll_dco.hw,
+	[CLKID_HIFI_PLL]	= &hifi_pll.hw
+};
+
+/* Convenience table to populate regmap in .probe */
+static struct clk_regmap *const a5_pll_clk_regmaps[] = {
+	&mpll0_div,
+	&mpll0,
+	&mpll1_div,
+	&mpll1,
+	&mpll2_div,
+	&mpll2,
+	&mpll3_div,
+	&mpll3,
+	&gp0_pll_dco,
+	&gp0_pll,
+	&hifi_pll_dco,
+	&hifi_pll
+};
+
+static const struct regmap_config clkc_regmap_config = {
+	.reg_bits       = 32,
+	.val_bits       = 32,
+	.reg_stride     = 4,
+	.max_register   = ANACTRL_MPLL_CTRL8,
+};
+
+static struct meson_clk_hw_data a5_pll_clks = {
+	.hws = a5_pll_hw_clks,
+	.num = ARRAY_SIZE(a5_pll_hw_clks),
+};
+
+static int aml_a5_pll_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct regmap *regmap;
+	void __iomem *base;
+	int clkid, ret, i;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	/* Populate regmap for the regmap backed clocks */
+	for (i = 0; i < ARRAY_SIZE(a5_pll_clk_regmaps); i++)
+		a5_pll_clk_regmaps[i]->map = regmap;
+
+	for (clkid = 0; clkid < a5_pll_clks.num; clkid++) {
+		/* array might be sparse */
+		if (!a5_pll_clks.hws[clkid])
+			continue;
+
+		ret = devm_clk_hw_register(dev, a5_pll_clks.hws[clkid]);
+		if (ret) {
+			dev_err(dev, "Clock registration failed\n");
+			return ret;
+		}
+	}
+
+	return devm_of_clk_add_hw_provider(dev, meson_clk_hw_get,
+					   &a5_pll_clks);
+}
+
+static const struct of_device_id a5_pll_clkc_match_table[] = {
+	{
+		.compatible = "amlogic,a5-pll-clkc",
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, a5_pll_clkc_match_table);
+
+static struct platform_driver a5_pll_driver = {
+	.probe		= aml_a5_pll_probe,
+	.driver		= {
+		.name	= "a5-pll-clkc",
+		.of_match_table = a5_pll_clkc_match_table,
+	},
+};
+module_platform_driver(a5_pll_driver);
+
+MODULE_DESCRIPTION("Amlogic A5 PLL Clock Controller driver");
+MODULE_AUTHOR("Chuan Liu <chuan.liu@amlogic.com>");
+MODULE_LICENSE("GPL");
