diff mbox series

[01/10] ARM64: dts: amlogic: Add all CPUs in cooling maps

Message ID 2778d0d4813cc56be851719846afecbab5f2e657.1542362530.git.viresh.kumar@linaro.org (mailing list archive)
State Accepted
Commit a5c12132d2167c7526a44e61cb368212afc7da16
Headers show
Series ARM64: dts: Fix incomplete cooling-maps | expand

Commit Message

Viresh Kumar Nov. 16, 2018, 10:04 a.m. UTC
Each CPU can (and does) participate in cooling down the system but the
DT only captures a handful of them, normally CPU0, in the cooling maps.
Things work by chance currently as under normal circumstances its the
first CPU of each cluster which is used by the operating systems to
probe the cooling devices. But as soon as this CPU ordering changes and
any other CPU is used to bring up the cooling device, we will start
seeing failures.

Also the DT is rather incomplete when we list only one CPU in the
cooling maps, as the hardware doesn't have any such limitations.

Update cooling maps to include all devices affected by individual trip
points.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 .../dts/amlogic/meson-gxm-khadas-vim2.dts     | 22 ++++++++-----------
 1 file changed, 9 insertions(+), 13 deletions(-)

Comments

Neil Armstrong Nov. 16, 2018, 10:07 a.m. UTC | #1
On 16/11/2018 11:04, Viresh Kumar wrote:
> Each CPU can (and does) participate in cooling down the system but the
> DT only captures a handful of them, normally CPU0, in the cooling maps.
> Things work by chance currently as under normal circumstances its the
> first CPU of each cluster which is used by the operating systems to
> probe the cooling devices. But as soon as this CPU ordering changes and
> any other CPU is used to bring up the cooling device, we will start
> seeing failures.
> 
> Also the DT is rather incomplete when we list only one CPU in the
> cooling maps, as the hardware doesn't have any such limitations.
> 
> Update cooling maps to include all devices affected by individual trip
> points.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
>  .../dts/amlogic/meson-gxm-khadas-vim2.dts     | 22 ++++++++-----------
>  1 file changed, 9 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
> index 313f88f8759e..cfc92d06a28f 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
> @@ -132,19 +132,15 @@
>  
>  				map1 {
>  					trip = <&cpu_alert1>;
> -					cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>;
> -				};
> -
> -				map2 {
> -					trip = <&cpu_alert1>;
> -					cooling-device =
> -						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> -				};
> -
> -				map3 {
> -					trip = <&cpu_alert1>;
> -					cooling-device =
> -						<&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +					cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
> +							 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>  				};
>  			};
>  		};
> 

Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Kevin Hilman Nov. 29, 2018, 12:35 a.m. UTC | #2
Viresh Kumar <viresh.kumar@linaro.org> writes:

> Each CPU can (and does) participate in cooling down the system but the
> DT only captures a handful of them, normally CPU0, in the cooling maps.
> Things work by chance currently as under normal circumstances its the
> first CPU of each cluster which is used by the operating systems to
> probe the cooling devices. But as soon as this CPU ordering changes and
> any other CPU is used to bring up the cooling device, we will start
> seeing failures.
>
> Also the DT is rather incomplete when we list only one CPU in the
> cooling maps, as the hardware doesn't have any such limitations.
>
> Update cooling maps to include all devices affected by individual trip
> points.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Queued for v4.21,

Thanks!

Kevin
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index 313f88f8759e..cfc92d06a28f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -132,19 +132,15 @@ 
 
 				map1 {
 					trip = <&cpu_alert1>;
-					cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>;
-				};
-
-				map2 {
-					trip = <&cpu_alert1>;
-					cooling-device =
-						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-
-				map3 {
-					trip = <&cpu_alert1>;
-					cooling-device =
-						<&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
+							 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};