| Message ID | 440a7cad-d48f-8975-4dfd-265b235bf629@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | soc: amlogic: switch bindings to yaml and adjust some dtbs's | expand |
On Mon, Jan 23, 2023 at 10:28:49PM +0100, Heiner Kallweit wrote: > Add Amlogic Meson vrtc controller binding. You are not adding, you are converting. > Tested with make targets dt_binding_check and dtbs_check. That's assumed... > > Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> > --- > .../bindings/rtc/amlogic,meson-vrtc.yaml | 50 +++++++++++++++++++ > .../bindings/rtc/rtc-meson-vrtc.txt | 22 -------- > 2 files changed, 50 insertions(+), 22 deletions(-) > create mode 100644 Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml > delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt > > diff --git a/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml > new file mode 100644 > index 000000000..26a70b3ce > --- /dev/null > +++ b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml > @@ -0,0 +1,50 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/rtc/amlogic,meson-vrtc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Amlogic Virtual RTC (VRTC) > + > +maintainers: > + - Neil Armstrong <neil.armstrong@linaro.org> > + > +description: | > + This is a Linux interface to an RTC managed by firmware, hence it's > + virtual from a Linux perspective. The interface is 1 register where > + an alarm time (in seconds) is to be written. > + The alarm register is a simple scratch register shared between the > + application processors (AP) and the secure co-processor (SCP.) When > + the AP suspends, the SCP will use the value of this register to > + program an always-on timer before going sleep. When the timer expires, > + the SCP will wake up and will then wake the AP. > + > +allOf: > + - $ref: rtc.yaml# > + > +properties: > + compatible: > + enum: > + - amlogic,meson-vrtc > + > + reg: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + bus@ff800000 { > + reg = <0x0 0xff800000 0x0 0x100000>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + rtc@a8 { > + compatible = "amlogic,meson-vrtc"; > + reg = <0x0 0x000a8 0x0 0x4>; Just use 1 address/size cell here and then you don't need the bus node (which has an error in it (no ranges)). Rob
diff --git a/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml new file mode 100644 index 000000000..26a70b3ce --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/amlogic,meson-vrtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Virtual RTC (VRTC) + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +description: | + This is a Linux interface to an RTC managed by firmware, hence it's + virtual from a Linux perspective. The interface is 1 register where + an alarm time (in seconds) is to be written. + The alarm register is a simple scratch register shared between the + application processors (AP) and the secure co-processor (SCP.) When + the AP suspends, the SCP will use the value of this register to + program an always-on timer before going sleep. When the timer expires, + the SCP will wake up and will then wake the AP. + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + enum: + - amlogic,meson-vrtc + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + bus@ff800000 { + reg = <0x0 0xff800000 0x0 0x100000>; + #address-cells = <2>; + #size-cells = <2>; + + rtc@a8 { + compatible = "amlogic,meson-vrtc"; + reg = <0x0 0x000a8 0x0 0x4>; + }; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt b/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt deleted file mode 100644 index c014f54a9..000000000 --- a/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt +++ /dev/null @@ -1,22 +0,0 @@ -* Amlogic Virtual RTC (VRTC) - -This is a Linux interface to an RTC managed by firmware, hence it's -virtual from a Linux perspective. The interface is 1 register where -an alarm time (in seconds) is to be written. - -Required properties: -- compatible: should be "amlogic,meson-vrtc" -- reg: physical address for the alarm register - -The alarm register is a simple scratch register shared between the -application processors (AP) and the secure co-processor (SCP.) When -the AP suspends, the SCP will use the value of this register to -program an always-on timer before going sleep. When the timer expires, -the SCP will wake up and will then wake the AP. - -Example: - - vrtc: rtc@0a8 { - compatible = "amlogic,meson-vrtc"; - reg = <0x0 0x000a8 0x0 0x4>; - };
Add Amlogic Meson vrtc controller binding. Tested with make targets dt_binding_check and dtbs_check. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- .../bindings/rtc/amlogic,meson-vrtc.yaml | 50 +++++++++++++++++++ .../bindings/rtc/rtc-meson-vrtc.txt | 22 -------- 2 files changed, 50 insertions(+), 22 deletions(-) create mode 100644 Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt