| Message ID | 1548866336-14765-1-git-send-email-fabrice.gasnier@st.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add nvmem support on STM32 | expand |
On 1/30/19 5:38 PM, Fabrice Gasnier wrote: > Non volatile memory area is available on STM32. It contains various > factory programmed information such as unique device ID, analog calibration... > This patchset adds NVMEM support to access these data. Hello, Gentle reminder for this new driver review Best Regards, Fabrice > > Fabrice Gasnier (4): > dt-bindings: nvmem: Add STM32 factory-programmed romem > nvmem: Add driver for STM32 factory-programmed read only mem > nvmem: stm32: add support for STM32MP15 BSEC to control OTP data > ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c > > .../devicetree/bindings/nvmem/st,stm32-romem.txt | 31 ++++ > arch/arm/boot/dts/stm32mp157c.dtsi | 13 ++ > drivers/nvmem/Kconfig | 10 + > drivers/nvmem/Makefile | 2 + > drivers/nvmem/stm32-romem.c | 202 +++++++++++++++++++++ > 5 files changed, 258 insertions(+) > create mode 100644 Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt > create mode 100644 drivers/nvmem/stm32-romem.c >
On 13/02/2019 10:15, Fabrice Gasnier wrote: > On 1/30/19 5:38 PM, Fabrice Gasnier wrote: >> Non volatile memory area is available on STM32. It contains various >> factory programmed information such as unique device ID, analog calibration... >> This patchset adds NVMEM support to access these data. > > Hello, > > Gentle reminder for this new driver review Nvmem provider driver itself looks fine for me, but I am unable to take this as 5.1 material, as I normally take nvmem patches which are reviewed and ready before rc5. dt bindings patch needs an ack from DT maintainers. Thanks, srini > > Best Regards, > Fabrice > >> >> Fabrice Gasnier (4): >> dt-bindings: nvmem: Add STM32 factory-programmed romem >> nvmem: Add driver for STM32 factory-programmed read only mem >> nvmem: stm32: add support for STM32MP15 BSEC to control OTP data >> ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c >> >> .../devicetree/bindings/nvmem/st,stm32-romem.txt | 31 ++++ >> arch/arm/boot/dts/stm32mp157c.dtsi | 13 ++ >> drivers/nvmem/Kconfig | 10 + >> drivers/nvmem/Makefile | 2 + >> drivers/nvmem/stm32-romem.c | 202 +++++++++++++++++++++ >> 5 files changed, 258 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt >> create mode 100644 drivers/nvmem/stm32-romem.c >>
On 2/13/19 11:34 AM, Srinivas Kandagatla wrote: > > > On 13/02/2019 10:15, Fabrice Gasnier wrote: >> On 1/30/19 5:38 PM, Fabrice Gasnier wrote: >>> Non volatile memory area is available on STM32. It contains various >>> factory programmed information such as unique device ID, analog >>> calibration... >>> This patchset adds NVMEM support to access these data. >> >> Hello, >> >> Gentle reminder for this new driver review > Nvmem provider driver itself looks fine for me, but I am unable to take > this as 5.1 material, as I normally take nvmem patches which are > reviewed and ready before rc5. > Hi Srini, Thanks for the feedback. > dt bindings patch needs an ack from DT maintainers. I hope Rob cant take a look at it. Best Regards, Fabrice > > Thanks, > srini >> >> Best Regards, >> Fabrice >> >>> >>> Fabrice Gasnier (4): >>> dt-bindings: nvmem: Add STM32 factory-programmed romem >>> nvmem: Add driver for STM32 factory-programmed read only mem >>> nvmem: stm32: add support for STM32MP15 BSEC to control OTP data >>> ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c >>> >>> .../devicetree/bindings/nvmem/st,stm32-romem.txt | 31 ++++ >>> arch/arm/boot/dts/stm32mp157c.dtsi | 13 ++ >>> drivers/nvmem/Kconfig | 10 + >>> drivers/nvmem/Makefile | 2 + >>> drivers/nvmem/stm32-romem.c | 202 >>> +++++++++++++++++++++ >>> 5 files changed, 258 insertions(+) >>> create mode 100644 >>> Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt >>> create mode 100644 drivers/nvmem/stm32-romem.c >>>