mbox series

[0/8] add power management support for SAM9X60

Message ID 1550159642-26878-1-git-send-email-claudiu.beznea@microchip.com (mailing list archive)
Headers show
Series add power management support for SAM9X60 | expand

Message

Claudiu Beznea Feb. 14, 2019, 3:54 p.m. UTC 
From: Claudiu Beznea <claudiu.beznea@microchip.com>

Hi,

This series add power management support for SAM9X60. The following
platform specific power management modes were enabled for it:
Idle, ULP0 and ULP1.

Thank you,
Claudiu Beznea

Claudiu Beznea (8):
  ARM: at91: pm: introduce at91_soc_pm structure
  dt-bindings: arm: atmel: add binding for SAM9X60 SoC
  ARM: at91: pm: initial PM support for SAM9X60
  ARM: at91: pm: keep at91_pm_backup_init() only for SAMA5D2 SoCs
  ARM: at91: pm: add support for per SoC wakeup source configuration
  ARM: at91: pm: add ULP1 support for SAM9X60
  ARM: at91: pm: disable RC oscillator in ULP0
  ARM: at91: pm: do not disable/enable PLLA for ULP modes

 .../devicetree/bindings/arm/atmel-at91.txt         |   1 +
 arch/arm/mach-at91/at91sam9.c                      |  18 ++
 arch/arm/mach-at91/generic.h                       |   2 +
 arch/arm/mach-at91/pm.c                            | 193 ++++++++++++++-------
 arch/arm/mach-at91/pm_suspend.S                    | 111 ++++++++----
 include/linux/clk/at91_pmc.h                       |   1 +
 6 files changed, 232 insertions(+), 94 deletions(-)

Comments

Alexandre Belloni Feb. 25, 2019, 10:46 a.m. UTC | #1 
On 14/02/2019 15:54:26+0000, Claudiu.Beznea@microchip.com wrote:
> From: Claudiu Beznea <claudiu.beznea@microchip.com>
> 
> Hi,
> 
> This series add power management support for SAM9X60. The following
> platform specific power management modes were enabled for it:
> Idle, ULP0 and ULP1.
> 
> Thank you,
> Claudiu Beznea
> 
> Claudiu Beznea (8):
>   ARM: at91: pm: introduce at91_soc_pm structure
>   dt-bindings: arm: atmel: add binding for SAM9X60 SoC
>   ARM: at91: pm: initial PM support for SAM9X60
>   ARM: at91: pm: keep at91_pm_backup_init() only for SAMA5D2 SoCs
>   ARM: at91: pm: add support for per SoC wakeup source configuration
>   ARM: at91: pm: add ULP1 support for SAM9X60
>   ARM: at91: pm: disable RC oscillator in ULP0
>   ARM: at91: pm: do not disable/enable PLLA for ULP modes
> 

All applied.