mbox series

[0/2] Add support for STM32MP1 power regulators

Message ID 1554737044-9460-1-git-send-email-p.paillet@st.com (mailing list archive)
Headers show
Series Add support for STM32MP1 power regulators | expand

Message

Pascal Paillet April 8, 2019, 3:24 p.m. UTC
The POWER block of the STM32MP1 integrates 3 fixed regulators with a ready
status bit for each one. The goal of this patchset is to add support those
regulators.

Pascal Paillet (2):
  dt-bindings: regulator: Add stm32mp1 pwr regulators
  regulator: Add support for stm32 power regulators

 .../bindings/regulator/st,stm32mp1-pwr-reg.txt     |  43 +++++
 drivers/regulator/Kconfig                          |   7 +
 drivers/regulator/Makefile                         |   1 +
 drivers/regulator/stm32-pwr.c                      | 193 +++++++++++++++++++++
 4 files changed, 244 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt
 create mode 100644 drivers/regulator/stm32-pwr.c