mbox series

[V12,0/5] Add i.MX7ULP EVK PWM backlight support

Message ID 1557408252-21281-1-git-send-email-Anson.Huang@nxp.com (mailing list archive)
Headers show
Series Add i.MX7ULP EVK PWM backlight support | expand

Message

Anson Huang May 9, 2019, 1:29 p.m. UTC
i.MX7ULP EVK board has MIPI-DSI display, its backlight is supplied by
TPM PWM module, this patch set enables i.MX7ULP TPM PWM driver support
and also add backlight support for MIPI-DSI display.

Changes since V11:
	- ONLY add a function comment in drivers/pwm/pwm-imx-tpm.c

Anson Huang (5):
  dt-bindings: pwm: Add i.MX TPM PWM binding
  pwm: Add i.MX TPM PWM driver support
  ARM: imx_v6_v7_defconfig: Add TPM PWM support by default
  ARM: dts: imx7ulp: Add tpm pwm support
  ARM: dts: imx7ulp-evk: Add backlight support

 .../devicetree/bindings/pwm/imx-tpm-pwm.txt        |  22 +
 arch/arm/boot/dts/imx7ulp-evk.dts                  |  20 +
 arch/arm/boot/dts/imx7ulp.dtsi                     |  10 +
 arch/arm/configs/imx_v6_v7_defconfig               |   1 +
 drivers/pwm/Kconfig                                |  11 +
 drivers/pwm/Makefile                               |   1 +
 drivers/pwm/pwm-imx-tpm.c                          | 448 +++++++++++++++++++++
 7 files changed, 513 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt
 create mode 100644 drivers/pwm/pwm-imx-tpm.c