mbox series

[0/4] ARM: dts: stm32: enable FMC2 NAND controller on stm32mp157c-ev1

Message ID 1561128590-14621-1-git-send-email-christophe.kerello@st.com (mailing list archive)
Headers show
Series ARM: dts: stm32: enable FMC2 NAND controller on stm32mp157c-ev1 | expand

Message

Christophe Kerello June 21, 2019, 2:49 p.m. UTC 
This patchset adds and enables FMC2 NAND controller used on
stm32mp157c-ev1.

Christophe Kerello (4):
  ARM: dts: stm32: add FMC2 NAND controller support on stm32mp157c
  ARM: dts: stm32: add FMC2 NAND controller pins muxing on
    stm32mp157c-ev1
  ARM: dts: stm32: enable FMC2 NAND controller on stm32mp157c-ev1
  ARM: multi_v7_defconfig: add FMC2 NAND  controller support

 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 44 +++++++++++++++++++++++++++++++
 arch/arm/boot/dts/stm32mp157c-ev1.dts     | 16 +++++++++++
 arch/arm/boot/dts/stm32mp157c.dtsi        | 19 +++++++++++++
 arch/arm/configs/multi_v7_defconfig       |  1 +
 4 files changed, 80 insertions(+)

Comments

Alexandre TORGUE July 25, 2019, 10:20 a.m. UTC | #1 
Hi Christophe

On 6/21/19 4:49 PM, Christophe Kerello wrote:
> This patchset adds and enables FMC2 NAND controller used on
> stm32mp157c-ev1.
> 
> Christophe Kerello (4):
>    ARM: dts: stm32: add FMC2 NAND controller support on stm32mp157c
>    ARM: dts: stm32: add FMC2 NAND controller pins muxing on
>      stm32mp157c-ev1
>    ARM: dts: stm32: enable FMC2 NAND controller on stm32mp157c-ev1
>    ARM: multi_v7_defconfig: add FMC2 NAND  controller support
> 
>   arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 44 +++++++++++++++++++++++++++++++
>   arch/arm/boot/dts/stm32mp157c-ev1.dts     | 16 +++++++++++
>   arch/arm/boot/dts/stm32mp157c.dtsi        | 19 +++++++++++++
>   arch/arm/configs/multi_v7_defconfig       |  1 +
>   4 files changed, 80 insertions(+)
> 

Series applied on stm32-next.
Note, I changed capital letter in patch1 directly (As I responded late).

Regards
Alex