mbox series

[v2,0/7] serial: imx: fix RTS and RTS/CTS handling

Message ID 1561558293-7683-1-git-send-email-sorganov@gmail.com (mailing list archive)
Headers show
Series serial: imx: fix RTS and RTS/CTS handling | expand

Message

Sergey Organov June 26, 2019, 2:11 p.m. UTC 
RTS signal and RTS/CTS handshake handling had a few problems these
patches fix.

In addition, minor cleanups are made to the involved code.

Changelog:

  v2:
      * Appended: "Reviewed-by:" and "Tested-by:"
        Sascha Hauer <s.hauer@pengutronix.de>

      * Removed "RFC" from header

  v1:

      * Fixed in "serial: imx: set_termios(): preserve RTS state"

-+	ucr2 = UCR2_SRST | UCR2_IRTS;
++	ucr2 |= UCR2_SRST | UCR2_IRTS;
      
        as noticed by Lothar Waßmann <LW@KARO-electronics.de>

      * Fixed in "serial: imx: set_termios(): preserve RTS state"
      
-+	ucr2 = old_ucr2 & (UCR2_TXEN | UCR2_RXEN | UCR2_ATEN | UCR2_CTSC);
++	ucr2 = old_ucr2 & (UCR2_TXEN | UCR2_RXEN | UCR2_ATEN | UCR2_CTS);

        as the fix for the problem found by Sascha Hauer
        <s.hauer@pengutronix.de>

      * Reordered:

        serial: imx: set_termios(): preserve RTS state
        serial: imx: set_termios(): do not enable autoRTS if RTS is unset

        as the latter makes sense only provided the former is already applied.
      

Sergey Organov (7):
  serial: imx: fix locking in set_termios()
  serial: imx: set_termios(): factor-out 'ucr2' initial value
  serial: imx: set_termios(): clarify RTS/CTS bits calculation
  serial: imx: set_termios(): preserve RTS state
  serial: imx: set_termios(): do not enable autoRTS if RTS is unset
  serial: imx: set_mctrl(): correctly restore autoRTS state
  serial: imx: get rid of imx_uart_rts_auto()

 drivers/tty/serial/imx.c | 93 ++++++++++++++++++++++++------------------------
 1 file changed, 47 insertions(+), 46 deletions(-)

--
2.10.0.1.g57b01a3