mbox series

[v5,0/9] i2c: add support for filters

Message ID 1568189911-31641-1-git-send-email-eugen.hristev@microchip.com (mailing list archive)
Headers show
Series i2c: add support for filters | expand

Message

Eugen Hristev Sept. 11, 2019, 8:24 a.m. UTC
From: Eugen Hristev <eugen.hristev@microchip.com>

Hello,

This series adds support for analog and digital filters for i2c controllers

This series is based on the series:
[PATCH v2 0/9] i2c: at91: filters support for at91 SoCs
and later
[PATCH v4 0/9] i2c: add support for filters
and enhanced to add the bindings for all controllers plus an extra bindings
for the width of the spikes in nanoseconds (digital filters) and cut-off
frequency (analog filters)

First, bindings are created for
'i2c-analog-filter'
'i2c-digital-filter'
'i2c-digital-filter-width-ns'
'i2c-analog-filter-cutoff-frequency'

The support is added in the i2c core to retrieve filter width/cutoff frequency
and add it to the timings structure.
Next, the at91 driver is enhanced for supporting digital filter, advanced
digital filter (with selectable spike width) and the analog filter.

Finally the device tree for two boards are modified to make use of the
new properties.

This series is the result of the comments on the ML in the direction
requested: to make the bindings globally available for i2c drivers.

Changes in v5:
- renamed i2c-filter-width-ns to i2c-digital-filter-width-ns as this
is applicable only to digital filter
- created new binding i2c-digital-filter-width-ns for analog filters.

Changes in v4:
- renamed i2c-ana-filter to i2c-analog-filter
- renamed i2c-dig-filter to i2c-digital-filter

Changes in v3:
- made bindings global for i2c controllers and modified accordingly
- gave up PADFCDF bit because it's a lack in datasheet
- the computation on the width of the spike is based on periph clock as it
is done for hold time.

Changes in v2:
- added device tree bindings and support for enable-ana-filt and
enable-dig-filt
- added the new properties to the DT for sama5d4_xplained/sama5d2_xplained

Eugen Hristev (9):
  dt-bindings: i2c: at91: add new compatible
  dt-bindings: i2c: add bindings for i2c analog and digital filter
  i2c: add support for filters optional properties
  i2c: at91: add new platform support for sam9x60
  i2c: at91: add support for digital filtering
  i2c: at91: add support for advanced digital filtering
  i2c: at91: add support for analog filtering
  ARM: dts: at91: sama5d2_xplained: add analog and digital filter for
    i2c
  ARM: dts: at91: sama5d4_xplained: add digital filter for i2c

 Documentation/devicetree/bindings/i2c/i2c-at91.txt |  3 +-
 Documentation/devicetree/bindings/i2c/i2c.txt      | 18 ++++++++
 arch/arm/boot/dts/at91-sama5d2_xplained.dts        |  6 +++
 arch/arm/boot/dts/at91-sama5d4_xplained.dts        |  1 +
 drivers/i2c/busses/i2c-at91-core.c                 | 38 +++++++++++++++++
 drivers/i2c/busses/i2c-at91-master.c               | 49 ++++++++++++++++++++--
 drivers/i2c/busses/i2c-at91.h                      | 13 ++++++
 drivers/i2c/i2c-core-base.c                        |  6 +++
 include/linux/i2c.h                                |  6 +++
 9 files changed, 136 insertions(+), 4 deletions(-)

Comments

Ludovic Desroches Sept. 14, 2019, 7:32 p.m. UTC | #1
On Wed, Sep 11, 2019 at 10:24:14AM +0200, Eugen Hristev - M18282 wrote:
> From: Eugen Hristev <eugen.hristev@microchip.com>
> 
> Hello,
> 
> This series adds support for analog and digital filters for i2c controllers
> 
> This series is based on the series:
> [PATCH v2 0/9] i2c: at91: filters support for at91 SoCs
> and later
> [PATCH v4 0/9] i2c: add support for filters
> and enhanced to add the bindings for all controllers plus an extra bindings
> for the width of the spikes in nanoseconds (digital filters) and cut-off
> frequency (analog filters)
> 
> First, bindings are created for
> 'i2c-analog-filter'
> 'i2c-digital-filter'
> 'i2c-digital-filter-width-ns'
> 'i2c-analog-filter-cutoff-frequency'
> 
> The support is added in the i2c core to retrieve filter width/cutoff frequency
> and add it to the timings structure.
> Next, the at91 driver is enhanced for supporting digital filter, advanced
> digital filter (with selectable spike width) and the analog filter.
> 
> Finally the device tree for two boards are modified to make use of the
> new properties.
> 
> This series is the result of the comments on the ML in the direction
> requested: to make the bindings globally available for i2c drivers.
> 
> Changes in v5:
> - renamed i2c-filter-width-ns to i2c-digital-filter-width-ns as this
> is applicable only to digital filter
> - created new binding i2c-digital-filter-width-ns for analog filters.

Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>

for at91 stuff. You can keep it for the future if needed as long as
changes mainly concerned the generic binding.

Regards

Ludovic

> 
> Changes in v4:
> - renamed i2c-ana-filter to i2c-analog-filter
> - renamed i2c-dig-filter to i2c-digital-filter
> 
> Changes in v3:
> - made bindings global for i2c controllers and modified accordingly
> - gave up PADFCDF bit because it's a lack in datasheet
> - the computation on the width of the spike is based on periph clock as it
> is done for hold time.
> 
> Changes in v2:
> - added device tree bindings and support for enable-ana-filt and
> enable-dig-filt
> - added the new properties to the DT for sama5d4_xplained/sama5d2_xplained
> 
> Eugen Hristev (9):
>   dt-bindings: i2c: at91: add new compatible
>   dt-bindings: i2c: add bindings for i2c analog and digital filter
>   i2c: add support for filters optional properties
>   i2c: at91: add new platform support for sam9x60
>   i2c: at91: add support for digital filtering
>   i2c: at91: add support for advanced digital filtering
>   i2c: at91: add support for analog filtering
>   ARM: dts: at91: sama5d2_xplained: add analog and digital filter for
>     i2c
>   ARM: dts: at91: sama5d4_xplained: add digital filter for i2c
> 
>  Documentation/devicetree/bindings/i2c/i2c-at91.txt |  3 +-
>  Documentation/devicetree/bindings/i2c/i2c.txt      | 18 ++++++++
>  arch/arm/boot/dts/at91-sama5d2_xplained.dts        |  6 +++
>  arch/arm/boot/dts/at91-sama5d4_xplained.dts        |  1 +
>  drivers/i2c/busses/i2c-at91-core.c                 | 38 +++++++++++++++++
>  drivers/i2c/busses/i2c-at91-master.c               | 49 ++++++++++++++++++++--
>  drivers/i2c/busses/i2c-at91.h                      | 13 ++++++
>  drivers/i2c/i2c-core-base.c                        |  6 +++
>  include/linux/i2c.h                                |  6 +++
>  9 files changed, 136 insertions(+), 4 deletions(-)
> 
> -- 
> 2.7.4
>
Eugen Hristev Oct. 7, 2019, 7:53 a.m. UTC | #2
On 11.09.2019 11:24, Eugen Hristev - M18282 wrote:
> From: Eugen Hristev <eugen.hristev@microchip.com>
> 
> Hello,
> 
> This series adds support for analog and digital filters for i2c controllers
> 
> This series is based on the series:
> [PATCH v2 0/9] i2c: at91: filters support for at91 SoCs
> and later
> [PATCH v4 0/9] i2c: add support for filters
> and enhanced to add the bindings for all controllers plus an extra bindings
> for the width of the spikes in nanoseconds (digital filters) and cut-off
> frequency (analog filters)
> 
> First, bindings are created for
> 'i2c-analog-filter'
> 'i2c-digital-filter'
> 'i2c-digital-filter-width-ns'
> 'i2c-analog-filter-cutoff-frequency'
> 
> The support is added in the i2c core to retrieve filter width/cutoff frequency
> and add it to the timings structure.
> Next, the at91 driver is enhanced for supporting digital filter, advanced
> digital filter (with selectable spike width) and the analog filter.
> 
> Finally the device tree for two boards are modified to make use of the
> new properties.
> 
> This series is the result of the comments on the ML in the direction
> requested: to make the bindings globally available for i2c drivers.
> 
> Changes in v5:
> - renamed i2c-filter-width-ns to i2c-digital-filter-width-ns as this
> is applicable only to digital filter
> - created new binding i2c-digital-filter-width-ns for analog filters.

Hello Wolfram and Peter,

Are you happy with the changes in this version? I haven't heard from you 
since this latest update.
I am interested to know if anymore changes are required or maybe we can 
move further with this support.

Thanks !
Eugen

> 
> Changes in v4:
> - renamed i2c-ana-filter to i2c-analog-filter
> - renamed i2c-dig-filter to i2c-digital-filter
> 
> Changes in v3:
> - made bindings global for i2c controllers and modified accordingly
> - gave up PADFCDF bit because it's a lack in datasheet
> - the computation on the width of the spike is based on periph clock as it
> is done for hold time.
> 
> Changes in v2:
> - added device tree bindings and support for enable-ana-filt and
> enable-dig-filt
> - added the new properties to the DT for sama5d4_xplained/sama5d2_xplained
> 
> Eugen Hristev (9):
>    dt-bindings: i2c: at91: add new compatible
>    dt-bindings: i2c: add bindings for i2c analog and digital filter
>    i2c: add support for filters optional properties
>    i2c: at91: add new platform support for sam9x60
>    i2c: at91: add support for digital filtering
>    i2c: at91: add support for advanced digital filtering
>    i2c: at91: add support for analog filtering
>    ARM: dts: at91: sama5d2_xplained: add analog and digital filter for
>      i2c
>    ARM: dts: at91: sama5d4_xplained: add digital filter for i2c
> 
>   Documentation/devicetree/bindings/i2c/i2c-at91.txt |  3 +-
>   Documentation/devicetree/bindings/i2c/i2c.txt      | 18 ++++++++
>   arch/arm/boot/dts/at91-sama5d2_xplained.dts        |  6 +++
>   arch/arm/boot/dts/at91-sama5d4_xplained.dts        |  1 +
>   drivers/i2c/busses/i2c-at91-core.c                 | 38 +++++++++++++++++
>   drivers/i2c/busses/i2c-at91-master.c               | 49 ++++++++++++++++++++--
>   drivers/i2c/busses/i2c-at91.h                      | 13 ++++++
>   drivers/i2c/i2c-core-base.c                        |  6 +++
>   include/linux/i2c.h                                |  6 +++
>   9 files changed, 136 insertions(+), 4 deletions(-)
>
Eugen Hristev Oct. 14, 2019, 7:01 a.m. UTC | #3
On 07.10.2019 10:47, Eugen Hristev wrote:
> 
> 
> On 11.09.2019 11:24, Eugen Hristev - M18282 wrote:
>> From: Eugen Hristev <eugen.hristev@microchip.com>
>>
>> Hello,
>>
>> This series adds support for analog and digital filters for i2c 
>> controllers
>>
>> This series is based on the series:
>> [PATCH v2 0/9] i2c: at91: filters support for at91 SoCs
>> and later
>> [PATCH v4 0/9] i2c: add support for filters
>> and enhanced to add the bindings for all controllers plus an extra 
>> bindings
>> for the width of the spikes in nanoseconds (digital filters) and cut-off
>> frequency (analog filters)
>>
>> First, bindings are created for
>> 'i2c-analog-filter'
>> 'i2c-digital-filter'
>> 'i2c-digital-filter-width-ns'
>> 'i2c-analog-filter-cutoff-frequency'
>>
>> The support is added in the i2c core to retrieve filter width/cutoff 
>> frequency
>> and add it to the timings structure.
>> Next, the at91 driver is enhanced for supporting digital filter, advanced
>> digital filter (with selectable spike width) and the analog filter.
>>
>> Finally the device tree for two boards are modified to make use of the
>> new properties.
>>
>> This series is the result of the comments on the ML in the direction
>> requested: to make the bindings globally available for i2c drivers.
>>
>> Changes in v5:
>> - renamed i2c-filter-width-ns to i2c-digital-filter-width-ns as this
>> is applicable only to digital filter
>> - created new binding i2c-digital-filter-width-ns for analog filters.
> 
> Hello Wolfram and Peter,
> 
> Are you happy with the changes in this version? I haven't heard from you 
> since this latest update.
> I am interested to know if anymore changes are required or maybe we can 
> move further with this support.
> 
> Thanks !
> Eugen
> 

Gentle ping


>>
>> Changes in v4:
>> - renamed i2c-ana-filter to i2c-analog-filter
>> - renamed i2c-dig-filter to i2c-digital-filter
>>
>> Changes in v3:
>> - made bindings global for i2c controllers and modified accordingly
>> - gave up PADFCDF bit because it's a lack in datasheet
>> - the computation on the width of the spike is based on periph clock 
>> as it
>> is done for hold time.
>>
>> Changes in v2:
>> - added device tree bindings and support for enable-ana-filt and
>> enable-dig-filt
>> - added the new properties to the DT for 
>> sama5d4_xplained/sama5d2_xplained
>>
>> Eugen Hristev (9):
>>    dt-bindings: i2c: at91: add new compatible
>>    dt-bindings: i2c: add bindings for i2c analog and digital filter
>>    i2c: add support for filters optional properties
>>    i2c: at91: add new platform support for sam9x60
>>    i2c: at91: add support for digital filtering
>>    i2c: at91: add support for advanced digital filtering
>>    i2c: at91: add support for analog filtering
>>    ARM: dts: at91: sama5d2_xplained: add analog and digital filter for
>>      i2c
>>    ARM: dts: at91: sama5d4_xplained: add digital filter for i2c
>>
>>   Documentation/devicetree/bindings/i2c/i2c-at91.txt |  3 +-
>>   Documentation/devicetree/bindings/i2c/i2c.txt      | 18 ++++++++
>>   arch/arm/boot/dts/at91-sama5d2_xplained.dts        |  6 +++
>>   arch/arm/boot/dts/at91-sama5d4_xplained.dts        |  1 +
>>   drivers/i2c/busses/i2c-at91-core.c                 | 38 
>> +++++++++++++++++
>>   drivers/i2c/busses/i2c-at91-master.c               | 49 
>> ++++++++++++++++++++--
>>   drivers/i2c/busses/i2c-at91.h                      | 13 ++++++
>>   drivers/i2c/i2c-core-base.c                        |  6 +++
>>   include/linux/i2c.h                                |  6 +++
>>   9 files changed, 136 insertions(+), 4 deletions(-)
>>
Wolfram Sang Oct. 21, 2019, 2:05 p.m. UTC | #4
On Mon, Oct 07, 2019 at 07:53:21AM +0000, Eugen.Hristev@microchip.com wrote:
> 
> 
> On 11.09.2019 11:24, Eugen Hristev - M18282 wrote:
> > From: Eugen Hristev <eugen.hristev@microchip.com>
> > 
> > Hello,
> > 
> > This series adds support for analog and digital filters for i2c controllers
> > 
> > This series is based on the series:
> > [PATCH v2 0/9] i2c: at91: filters support for at91 SoCs
> > and later
> > [PATCH v4 0/9] i2c: add support for filters
> > and enhanced to add the bindings for all controllers plus an extra bindings
> > for the width of the spikes in nanoseconds (digital filters) and cut-off
> > frequency (analog filters)
> > 
> > First, bindings are created for
> > 'i2c-analog-filter'
> > 'i2c-digital-filter'
> > 'i2c-digital-filter-width-ns'
> > 'i2c-analog-filter-cutoff-frequency'
> > 
> > The support is added in the i2c core to retrieve filter width/cutoff frequency
> > and add it to the timings structure.
> > Next, the at91 driver is enhanced for supporting digital filter, advanced
> > digital filter (with selectable spike width) and the analog filter.
> > 
> > Finally the device tree for two boards are modified to make use of the
> > new properties.
> > 
> > This series is the result of the comments on the ML in the direction
> > requested: to make the bindings globally available for i2c drivers.
> > 
> > Changes in v5:
> > - renamed i2c-filter-width-ns to i2c-digital-filter-width-ns as this
> > is applicable only to digital filter
> > - created new binding i2c-digital-filter-width-ns for analog filters.
> 
> Hello Wolfram and Peter,
> 
> Are you happy with the changes in this version? I haven't heard from you 
> since this latest update.
> I am interested to know if anymore changes are required or maybe we can 
> move further with this support.

So, I had a look now and I am happy. I will give Peter one more day to
comment, otherwise I'll apply it tomorrow.

Thanks for your patience and keeping at it!
Peter Rosin Oct. 21, 2019, 3:23 p.m. UTC | #5
On 2019-10-21 16:05, Wolfram Sang wrote:
> On Mon, Oct 07, 2019 at 07:53:21AM +0000, Eugen.Hristev@microchip.com wrote:
>>
>>
>> On 11.09.2019 11:24, Eugen Hristev - M18282 wrote:
>>> From: Eugen Hristev <eugen.hristev@microchip.com>
>>>
>>> Hello,
>>>
>>> This series adds support for analog and digital filters for i2c controllers
>>>
>>> This series is based on the series:
>>> [PATCH v2 0/9] i2c: at91: filters support for at91 SoCs
>>> and later
>>> [PATCH v4 0/9] i2c: add support for filters
>>> and enhanced to add the bindings for all controllers plus an extra bindings
>>> for the width of the spikes in nanoseconds (digital filters) and cut-off
>>> frequency (analog filters)
>>>
>>> First, bindings are created for
>>> 'i2c-analog-filter'
>>> 'i2c-digital-filter'
>>> 'i2c-digital-filter-width-ns'
>>> 'i2c-analog-filter-cutoff-frequency'
>>>
>>> The support is added in the i2c core to retrieve filter width/cutoff frequency
>>> and add it to the timings structure.
>>> Next, the at91 driver is enhanced for supporting digital filter, advanced
>>> digital filter (with selectable spike width) and the analog filter.
>>>
>>> Finally the device tree for two boards are modified to make use of the
>>> new properties.
>>>
>>> This series is the result of the comments on the ML in the direction
>>> requested: to make the bindings globally available for i2c drivers.
>>>
>>> Changes in v5:
>>> - renamed i2c-filter-width-ns to i2c-digital-filter-width-ns as this
>>> is applicable only to digital filter
>>> - created new binding i2c-digital-filter-width-ns for analog filters.
>>
>> Hello Wolfram and Peter,
>>
>> Are you happy with the changes in this version? I haven't heard from you 
>> since this latest update.
>> I am interested to know if anymore changes are required or maybe we can 
>> move further with this support.
> 
> So, I had a look now and I am happy. I will give Peter one more day to
> comment, otherwise I'll apply it tomorrow.

I had another read-through and only found one nit which is in a separate
message. You can add

Reviewed-by: Peter Rosin <peda@axentia.se>

for the whole series.

Cheers,
Peter

> Thanks for your patience and keeping at it!
>
Eugen Hristev Oct. 23, 2019, 11:01 a.m. UTC | #6
On 21.10.2019 18:23, Peter Rosin wrote:

> 
> On 2019-10-21 16:05, Wolfram Sang wrote:
>> On Mon, Oct 07, 2019 at 07:53:21AM +0000, Eugen.Hristev@microchip.com wrote:
>>>
>>>
>>> On 11.09.2019 11:24, Eugen Hristev - M18282 wrote:
>>>> From: Eugen Hristev <eugen.hristev@microchip.com>
>>>>
>>>> Hello,
>>>>
>>>> This series adds support for analog and digital filters for i2c controllers
>>>>
>>>> This series is based on the series:
>>>> [PATCH v2 0/9] i2c: at91: filters support for at91 SoCs
>>>> and later
>>>> [PATCH v4 0/9] i2c: add support for filters
>>>> and enhanced to add the bindings for all controllers plus an extra bindings
>>>> for the width of the spikes in nanoseconds (digital filters) and cut-off
>>>> frequency (analog filters)
>>>>
>>>> First, bindings are created for
>>>> 'i2c-analog-filter'
>>>> 'i2c-digital-filter'
>>>> 'i2c-digital-filter-width-ns'
>>>> 'i2c-analog-filter-cutoff-frequency'
>>>>
>>>> The support is added in the i2c core to retrieve filter width/cutoff frequency
>>>> and add it to the timings structure.
>>>> Next, the at91 driver is enhanced for supporting digital filter, advanced
>>>> digital filter (with selectable spike width) and the analog filter.
>>>>
>>>> Finally the device tree for two boards are modified to make use of the
>>>> new properties.
>>>>
>>>> This series is the result of the comments on the ML in the direction
>>>> requested: to make the bindings globally available for i2c drivers.
>>>>
>>>> Changes in v5:
>>>> - renamed i2c-filter-width-ns to i2c-digital-filter-width-ns as this
>>>> is applicable only to digital filter
>>>> - created new binding i2c-digital-filter-width-ns for analog filters.
>>>
>>> Hello Wolfram and Peter,
>>>
>>> Are you happy with the changes in this version? I haven't heard from you
>>> since this latest update.
>>> I am interested to know if anymore changes are required or maybe we can
>>> move further with this support.
>>
>> So, I had a look now and I am happy. I will give Peter one more day to
>> comment, otherwise I'll apply it tomorrow.
> 
> I had another read-through and only found one nit which is in a separate
> message. You can add
> 
> Reviewed-by: Peter Rosin <peda@axentia.se>
> 
> for the whole series.

Hello Peter and Wolfram,

Thanks for reviewing.
Send another version of the patch with the nit ?
Or how would you like to proceed ?

Thanks,
Eugen

> 
> Cheers,
> Peter
> 
>> Thanks for your patience and keeping at it!
>>
> 
> 
>
Wolfram Sang Oct. 23, 2019, 12:19 p.m. UTC | #7
> Send another version of the patch with the nit ?

That would be easiest for me.

Thanks!
Wolfram Sang Oct. 24, 2019, 6:30 p.m. UTC | #8
On Wed, Sep 11, 2019 at 08:24:14AM +0000, Eugen.Hristev@microchip.com wrote:
> From: Eugen Hristev <eugen.hristev@microchip.com>
> 
> Hello,
> 
> This series adds support for analog and digital filters for i2c controllers
> 
> This series is based on the series:
> [PATCH v2 0/9] i2c: at91: filters support for at91 SoCs
> and later
> [PATCH v4 0/9] i2c: add support for filters
> and enhanced to add the bindings for all controllers plus an extra bindings
> for the width of the spikes in nanoseconds (digital filters) and cut-off
> frequency (analog filters)
> 
> First, bindings are created for
> 'i2c-analog-filter'
> 'i2c-digital-filter'
> 'i2c-digital-filter-width-ns'
> 'i2c-analog-filter-cutoff-frequency'
> 
> The support is added in the i2c core to retrieve filter width/cutoff frequency
> and add it to the timings structure.
> Next, the at91 driver is enhanced for supporting digital filter, advanced
> digital filter (with selectable spike width) and the analog filter.
> 
> Finally the device tree for two boards are modified to make use of the
> new properties.
> 
> This series is the result of the comments on the ML in the direction
> requested: to make the bindings globally available for i2c drivers.

Applied patches 1-7 to for-next (patch 3 is v6). Thanks for your
patience and thanks to Ludovic and Peter for the review! Patches 8-9
should go via the at91 tree.
Ludovic Desroches Oct. 25, 2019, 10:05 a.m. UTC | #9
On Thu, Oct 24, 2019 at 08:30:35PM +0200, Wolfram Sang wrote:
> On Wed, Sep 11, 2019 at 08:24:14AM +0000, Eugen.Hristev@microchip.com wrote:
> > From: Eugen Hristev <eugen.hristev@microchip.com>
> > 
> > Hello,
> > 
> > This series adds support for analog and digital filters for i2c controllers
> > 
> > This series is based on the series:
> > [PATCH v2 0/9] i2c: at91: filters support for at91 SoCs
> > and later
> > [PATCH v4 0/9] i2c: add support for filters
> > and enhanced to add the bindings for all controllers plus an extra bindings
> > for the width of the spikes in nanoseconds (digital filters) and cut-off
> > frequency (analog filters)
> > 
> > First, bindings are created for
> > 'i2c-analog-filter'
> > 'i2c-digital-filter'
> > 'i2c-digital-filter-width-ns'
> > 'i2c-analog-filter-cutoff-frequency'
> > 
> > The support is added in the i2c core to retrieve filter width/cutoff frequency
> > and add it to the timings structure.
> > Next, the at91 driver is enhanced for supporting digital filter, advanced
> > digital filter (with selectable spike width) and the analog filter.
> > 
> > Finally the device tree for two boards are modified to make use of the
> > new properties.
> > 
> > This series is the result of the comments on the ML in the direction
> > requested: to make the bindings globally available for i2c drivers.
> 
> Applied patches 1-7 to for-next (patch 3 is v6). Thanks for your
> patience and thanks to Ludovic and Peter for the review! Patches 8-9
> should go via the at91 tree.
> 

Thanks, patch 8 and 9 applied to at91-dt.

Regards

Ludovic