[0/7] Add FlexCAN support on i.MX8QXP

Message

Joakim Zhang Feb. 17, 2020, 3:19 a.m. UTC

Add FlexCAN support on i.MX8QXP.

Joakim Zhang (7):
  firmware: imx: scu-pd: add power domain for I2C and INTMUX in CM40 SS
  clk: imx8: Add SCU and LPCG clocks for I2C in CM40 SS
  bindings: clock: imx8qxp: add "fsl,imx8qxp-lpcg-cm40" compatible
    string
  clk: imx: imx8qxp: Enable SCU and LPCG clocks for I2C in CM40 SS
  arch: arm64: dts: imx8qxp: add device node for I2C and INTMUX in CM40
    SS
  clk: imx: imx8qxp: add LPCG clock for FlexCAN in ADMA SS
  arch: arm64: dts: imx8qxp: add device node for CAN in ADMA SS

 .../bindings/clock/imx8qxp-lpcg.txt           |   1 +
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts |  74 ++++++++++++
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi    | 106 ++++++++++++++++++
 drivers/clk/imx/clk-imx8qxp-lpcg.c            |  15 +++
 drivers/clk/imx/clk-imx8qxp-lpcg.h            |   3 +
 drivers/clk/imx/clk-imx8qxp.c                 |   4 +
 drivers/firmware/imx/scu-pd.c                 |   4 +
 include/dt-bindings/clock/imx8-clock.h        |  13 ++-
 8 files changed, 219 insertions(+), 1 deletion(-)