mbox series

[0/4] Initial support for phyBOARD-Pollux i.MX8MP

Message ID 1607113982-109524-1-git-send-email-t.remmet@phytec.de (mailing list archive)
Headers show
Series Initial support for phyBOARD-Pollux i.MX8MP | expand

Message

Teresa Remmet Dec. 4, 2020, 8:32 p.m. UTC 
Hello,

this patch stack adds initial support for the SoM phyCORE-i.MX8MP
and the carrier board phyBOARD-Pollux.

Teresa

Teresa Remmet (4):
  arm64: defconfig: Enable rv3028 i2c rtc driver
  arm64: defconfig: Enable PCA9532 support
  bindings: arm: fsl: Add PHYTEC i.MX8MP devicetree bindings
  arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP

 Documentation/devicetree/bindings/arm/fsl.yaml     |   7 +
 arch/arm64/boot/dts/freescale/Makefile             |   1 +
 .../dts/freescale/imx8mp-phyboard-pollux-rdk.dts   |  16 ++
 .../boot/dts/freescale/imx8mp-phyboard-pollux.dtsi | 152 ++++++++++
 .../boot/dts/freescale/imx8mp-phycore-som.dtsi     | 319 +++++++++++++++++++++
 arch/arm64/configs/defconfig                       |   2 +
 6 files changed, 497 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi