mbox series

[V4,0/8] Introduce an attribute to choose timing setting

Message ID 1626517079-9057-1-git-send-email-kewei.xu@mediatek.com (mailing list archive)
Headers show
Series Introduce an attribute to choose timing setting | expand

Message

Kewei Xu July 17, 2021, 10:17 a.m. UTC 
v4:
1. Remove the repeated assignment of the inter_clk_div parameter
2. Modify the wrong assignment of OFFSET_MULTI_DMA
3. Unify the log print format of the i2c_dump_register() and drop the extra outer parentheses
4. Place the fixes at the very least
5. Add fixed tags 25708278f810 ("i2c: mediatek: Add i2c support for MediaTek MT8183")
6. Add "i2c: mediatek: modify bus speed calculation formula"
7. Fix single line characters exceeding 80 characters
8. Combine two different series of patches.

v3:
1. Fix code errors caused by v2 modification

v2:
1. Add "dt-bindings: i2c: add attribute default-timing-adjust"
2. Split the fix into sepatate patch.

Kewei Xu (8):
  i2c: mediatek: fixing the incorrect register offset
  dt-bindings: i2c: update bindings for MT8195 SoC
  i2c: mediatek: Reset the handshake signal between i2c and dma
  i2c: mediatek: Dump i2c/dma register when a timeout occurs
  dt-bindings: i2c: add attribute default-timing-adjust
  i2c: mediatek: Add OFFSET_EXT_CONF setting back
  i2c: mediatek: Isolate speed setting via dts for special devices
  i2c: mediatek: modify bus speed calculation formula

 .../devicetree/bindings/i2c/i2c-mt65xx.txt    |   3 +
 drivers/i2c/busses/i2c-mt65xx.c               | 194 ++++++++++++++++--
 2 files changed, 180 insertions(+), 17 deletions(-)